Raspberry Pi composite video problem

[Eric Gunther]

Just wanted to point out that I am using 

FreeBSD-10.1-RELEASE-arm-armv6-RPI-B.img

as the boot image, unmodified.

thanks

--e



On Fri, 2014-11-28 at 11:05 +0800, Erich Dollansky wrote:
> Hi,
> 
> On Thu, 27 Nov 2014 08:25:28 -0500
> Eric Gunther <egunther at warwick.net> wrote:
> 
> > input. I have an old tv with composite input and outputs, I thought
> 
> I am not able to help you here.
> 
> > I have enabled sshd, and set the hostname although I cannot seem to
> > find the RPi on the network while using Ethernet cable (Cat 5e)...
> 
> Use telnet for the start to make sure that you avoided the simplest
> problems. You need inetd and /etc/inetd.conf with telnet enabled in
> there.
> 
> > This is not surprising because I am novice with networking.  I have
> > also tried telnet, although I saw elsewhere on this list that one has
> > to enable it. I have not found the place to do that, I looked in
> > loader.conf and rc.conf.
> > 
> You have to enable inetd in rc.conf and telnet on /etc/inetd.conf.
> 
> Erich