A current BB Black issues

[George Rosamond]

Rui Paulo:
> On Nov 6, 2014, at 14:56, George Rosamond
> <george at ceetonetechnology.com> wrote:
>> BeagleBone Black with:
>> 
>> FreeBSD bbb-fbsd 10.1-PRERELEASE FreeBSD 10.1-PRERELEASE #0
>> r274186: Thu Nov  6 14:51:29 EST 2014 
>> root at stinkyX:/data/crochet/work/bbw/obj/arm.armv6/data/fbsd-10-stable/sys/BEAGLEBONE
>>
>> 
arm
>> 
>> 
>> First, I tried to run copy-to-emmc.sh but noticed this is the
>> dmesg:
>> 
>> sdhci_ti1-slot0: Got data interrupt 0x00000002, but there is no
>> active command. sdhci_ti1-slot0: ============== REGISTER DUMP
>> ============== sdhci_ti1-slot0: Sys addr: 0x00000000 | Version:
>> 0x00003101 sdhci_ti1-slot0: Blk size: 0x00000004 | Blk cnt:
>> 0x00000001 sdhci_ti1-slot0: Argument: 0x00020000 | Trn mode:
>> 0x0000071b sdhci_ti1-slot0: Present:  0x01f70000 | Host ctl:
>> 0x00000000 sdhci_ti1-slot0: Power:    0x0000000d | Blk gap:
>> 0x00000000 sdhci_ti1-slot0: Wake-up:  0x00000000 | Clock:
>> 0x00008007 sdhci_ti1-slot0: Timeout:  0x00000006 | Int stat:
>> 0x00000000 sdhci_ti1-slot0: Int enab: 0x017f00fb | Sig enab:
>> 0x017f00fb sdhci_ti1-slot0: AC12 err: 0x00000000 | Slot int:
>> 0x00000000 sdhci_ti1-slot0: Caps:     0x06e10080 | Max curr:
>> 0x00000000 sdhci_ti1-slot0:
>> =========================================== sdhci_ti1-slot0: Got
>> data interrupt 0x00000002, but there is no active command. 
>> sdhci_ti1-slot0: ============== REGISTER DUMP ============== 
>> sdhci_ti1-slot0: Sys addr: 0x00000000 | Version:  0x00003101 
>> sdhci_ti1-slot0: Blk size: 0x00000004 | Blk cnt:  0x00000001 
>> sdhci_ti1-slot0: Argument: 0x00020000 | Trn mode: 0x0000071b 
>> sdhci_ti1-slot0: Present:  0x01f70000 | Host ctl: 0x00000000 
>> sdhci_ti1-slot0: Power:    0x0000000d | Blk gap:  0x00000000 
>> sdhci_ti1-slot0: Wake-up:  0x00000000 | Clock:    0x00008007 
>> sdhci_ti1-slot0: Timeout:  0x00000006 | Int stat: 0x00000000 
>> sdhci_ti1-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb 
>> sdhci_ti1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 
>> sdhci_ti1-slot0: Caps:     0x06e10080 | Max curr: 0x00000000 
>> sdhci_ti1-slot0: =========================================== 
>> am335x_pmic0: TPS65217C ver 1.2 powered by USB
>> 
>> and mmcsd1 isn't showing up in /dev/, the boot process, etc.  It
>> will boot from eMMC if I don't hold down the button by the microSD
>> card.
>> 
>> Anything I should be aware of?
> 
> My speculation is that the newer U-Boot breaks the eMMC support in
> FreeBSD.  An U-Boot from 2013.4 seems to work fine while the U-Boot
> from 2014.3 doesn't work for me.
> 

That didn't even cross my mind.  I'll definitely try that.

Thanks.

g