partition resize
Bernd Walter
ticso at cicely7.cicely.de
Sat May 3 13:19:05 UTC 2014
On Sat, May 03, 2014 at 07:27:11PM +0700, Paul Darius wrote:
> i got 2 pcs sdcard and both give the same result
There is some kind of bug handling the fdisk/bsdlabel chaining.
autosize needs at least two calls with reboot in between.
> P
> On May 3, 2014 7:16 PM, "Boris Samorodov" <bsam at passap.ru> wrote:
>
> > 03.05.2014 12:10, Paul Darius ?????:
> > >
> > > here is the partition created from the fbsd image
> >
> > Are you sure? Seems that you did some changes to it.
> >
> > > $ gpart show
> > > => 63 61497281 mmcsd0 MBR (29G)
> > > 63 34776 1 !12 [active] (17M)
> > > 34839 61462485 2 freebsd (29G)
> > > 61497324 20 - free - (10K)
> > >
> > > => 0 1918278 mmcsd0s2 BSD (29G)
> > > 0 1918278 1 freebsd-ufs (937M)
> >
> > Seems that you already tryed to do a resize. If I'm not mistaken,
> > you resized only partition 2 of mmcsd0 device (-i 2 mmcsd0). Also
> > partition 1 of mmcsd0s2 device should be resized (-i 1 mmcsd0s2).
> > Then you should use growfs to enlarge the filesystem as well.
> >
> > A note: the last time I did so bsdlabel of mmcsd0s2 (slice c:)
> > was not auto enlarged, so I should do it by hand.
> >
> > > $ cat /etc/fstab
> > > /dev/mmcsd0s1 /boot/msdos msdosfs rw,noatime 0 0
> > > /dev/mmcsd0s2a / ufs rw,noatime 1 1
> > > md /tmp mfs rw,noatime,-s30m 0 0
> > > md /var/log mfs rw,noatime,-s15m 0 0
> > > md /var/tmp mfs rw,noatime,-s5m 0 0
> > >
> > > when I do extract the ports.tar.gz into /usr, I end up with file system
> > full
> > >
> > > how do i know which partition for what and how to resize them ?
> > >
> > > the /etc/rc.d/autosize start give the result :
> > > # /etc/rc.d/autosize start
> > > Enlarging root partition
> > > mmcsd0s2 resized
> > > gpart: autofill: No space left on device
> > > growfs: requested size 937MB is not larger than the current filesystem
> > > size 937MB
> >
> > I've never used autosize, so no comments here, sorry.
> >
> > --
> > WBR, Boris Samorodov (bsam)
> > FreeBSD Committer, http://www.FreeBSD.org The Power To Serve
> >
> _______________________________________________
> freebsd-arm at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
--
B.Walter <bernd at bwct.de> http://www.bwct.de
Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.
More information about the freebsd-arm
mailing list