Today's Crochet fixes

[fabiodive]

Hello all,

I have here my BBB with a working FreeBSD 11 revision 264703,
the image was generated by the last crochet source from git,
I used the u-boot from ports /usr/ports/sysutils/u-boot-beaglebone-eabi
patched with the last diff files from Xuebing Wang to increase the CPU
frequency clock to 1GHz.

I had to modify a bit crochet source to allow installation of the u-boot
from ports, I couldn't figure out a better way installing without modifications,
maybe it was my fault, I spent a bit of time following all the calls to the 
related functions and variables, in then end I forced to pickup u-boot
from the installed port commenting out an testing if block and using an
absolute path to the port.

The command "ubench -c -s" output is:
Ubench Single CPU:     9401 (0.39s)

I suppose BBB is running at 1GHz, if somebody has got better ideas to
check the system clock and do some benchmarking I will appreciate that.

I am monitoring CPU temperature but the system I really stable.
I like this setup. Thank you to all the guys who worked to every single
piece of this puzzle.

thank you
cheers
f.

On Apr 20, 2014, at 19:48 , Tim Kientzle <kientzle at freebsd.org> wrote:

> 
> On Apr 20, 2014, at 11:40 AM, Tom Everett <tom at khubla.com> wrote:
> 
>> Are the updated xdev instructions valid for FreeBSD-10 also, or just for FreeBSD-11?
> 
> I believe they will work with both, though I've only tried with 11-CURRENT.
> 
> Tim
> 
> _______________________________________________
> freebsd-arm at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"