[CFT] Exynos5250
Aleksandr Rybalko
ray at freebsd.org
Thu May 23 21:36:54 UTC 2013
On Thu, 23 May 2013 15:01:55 +0000
Ruslan Bukin <br at bsdpad.com> wrote:
> Hi!
>
> I'm happy to introduce freebsd/arm port for Samsung Exynos processors.
> THe port covers initial, very limited support for Exynos5250
> and includes: GIC, ARMv7 Generic Timer, USB EHCI, UART.
> Clocks still handled by uboot.
>
> For develop and tests I used Arndale Board and u-boot by linaro
> (git://git.linaro.org/boot/u-boot-linaro-stable.git)
>
> One thing that stumped me for a while is that the interrupt controller
> driver, gic.c, do works with Group 0 (secure) type of interrupts,
> but u-boot switches them all to be in Group 1 (non-secure).
> So I had to switch them back in gic.c.
>
> Big thanks to ray@ for help and understanding. Thanks, Ray! :)
No, it's your work, so Thank you! I did hints only :)
>
> code lives here:
> http://hg.bsdpad.com/
>
> Known problems:
> 1. If specify more than 512MB RAM then panic occurs:
> panic: kmem_suballoc: bad status return of 3
> 2. SMP code exists, but don't properly works due to some
> problems in SMP on arm
>
> -Ruslan
>
> _______________________________________________
> freebsd-arm at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
--
Aleksandr Rybalko <ray at freebsd.org>
More information about the freebsd-arm
mailing list