My WLI-UC-GNM up crash

[XiaoQI Ge]

I'll try this patch
--
Regards.
By: XiaoQI Ge; PGP:8B09D5F7
WWW: https://www.7axu.com/



2013/7/15 Daan Vreeken <Daan at vitsch.nl>:
> Hi XiaoQI Ge,
>
> On Monday 15 July 2013 06:12:38 XiaoQI Ge wrote:
>> My WLI-UC-GNM ifconfig up when collapsed,
>> I do not know how to solve
>>
>>
>> root at FreeBSD:~ # ifconfig wlan create wlandev run0
>> wlan0: Ethernet address: 10:6f:3f:2b:fd:6d
>> wlan0
>> root at FreeBSD:~ # ifconfig
>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>>         options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
>>         inet6 ::1 prefixlen 128
>>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
>>         inet 127.0.0.1 netmask 0xff000000
>>         nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
>> run0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
>>         ether 10:6f:3f:2b:fd:6d
>>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>         media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
>>         status: no carrier
>> wlan0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
>>         ether 10:6f:3f:2b:fd:6d
>>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>         media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
>>         status: no carrier
>>         ssid "" channel 1 (2412 MHz 11b)
>>         country US authmode OPEN privacy OFF txpower 0 bmiss 7 scanvalid 60
>>         wme bintval 0
>> root at FreeBSD:~ # dhclient wlan0
>> wlan0: no link .............. giving up
>> root at FreeBSD:~ # pciconf -lv
>> pciconf: /dev/pci: No such file or directory
>> root at FreeBSD:~ # ifconfig wlan0 up scan
>> run0: firmware RT2870 ver. 0.236 loaded
>> root at FreeBSD:~ # Fatal kernel mode data abort: 'Alignment Fault 1'
>> trapframe: 0xde177d68
>> FSR=00000801, FAR=c24b3faf, spsr=00000013
>> r0 =c24b7000, r1 =c24b3faf, r2 =c24b720c, r3 =0000096c
>> r4 =80003eaf, r5 =c249c800, r6 =c24b7024, r7 =c0760898
>> r8 =c24b7000, r9 =00000014, r10=c055851d, r11=de177e18
>> r12=0000002e, ssp=de177db4, slr=00000000, pc =c04072d4
>>
>> [ thread pid 0 tid 100038 ]
>> Stopped at      ieee80211_radiotap_chan_change+0x94:    strh    r3, [r1]
>> db> bt
>> Tracing pid 0 tid 100038 td 0xc232a620
>> _end() at 0xde177a90
>>         scp=0xde177a90 rlv=0xc04f5e48 (db_trace_thread+0x34)
>>         rsp=0xde177a74 rfp=0xc05b8750
>> Bad frame pointer: 0xc05b8750
>> db>
>
> Please see the patches I posted here :
>         http://www.freebsd.org/cgi/query-pr.cgi?pr=arm%2F179532&cat=
>
> I think they may solve your problem.
>
>
> Regards,
> --
> Ing. Daan Vreeken
> Vitsch Electronics
> http://Vitsch.nl/
> http://VitschVPN.nl/
> tel: +31-(0)40-7113051
> KvK nr: 17174380
> --
> Machines en netwerken op afstand beheren? Vitsch VPN oplossing!
> Kijk voor meer informatie op: http://www.VitschVPN.nl/