Booting Beagleboard Black

[Tom Everett]

Here are the build logs, the image file (gzipped), and config.sh.

http://files.khubla.com/tim/

Let me know if there is anything more you need.



On Sun, Jul 21, 2013 at 10:46 PM, Tim Kientzle <kientzle at freebsd.org> wrote:

> Please send me the Crochet build logs and I'll see if
> I can puzzle anything out.
>
> The console log from running Crochet would also be interesting.
>
> Tim
>
>
> On Jul 21, 2013, at 9:25 PM, Tom Everett wrote:
>
> > ok, I've rebuilt with a fresh source tree, fresh xdev build and fresh
> pull of crochet; same result. Should I post the crochet build logs?  Could
> the fact that I'm building it on AMD64 be part of the problem?
> >
> > My host OS is:
> >
> > FreeBSD 9.1-RELEASE-p4 #0: Mon Jun 17 11:42:37 UTC 2013
> >     root at amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC
> amd64
> > CPU: AMD A8-3870 APU with Radeon(tm) HD Graphics (3000.26-MHz K8-class
> CPU)
> >
> >
> >
> > Here is the console log from the Beagle
> >
> > U-Boot 2013.04 (Jul 21 2013 - 22:07:04)
> >
> > I2C:   ready
> > DRAM:  512 MiB
> > WARNING: Caches not enabled
> > MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
> > Using default environment
> >
> > musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx,
> SoftConn)
> > musb-hdrc: MHDRC RTL version 2.0
> > musb-hdrc: setup fifo_mode 4
> > musb-hdrc: 28/31 max ep, 16384/16384 memory
> > USB Peripheral mode controller at 47401000 using PIO, IRQ 0
> > musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx,
> SoftConn)
> > musb-hdrc: MHDRC RTL version 2.0
> > musb-hdrc: setup fifo_mode 4
> > musb-hdrc: 28/31 max ep, 16384/16384 memory
> > USB Host mode controller at 47401800 using PIO, IRQ 0
> > Net:   <ethaddr> not set. Validating first E-fuse MAC
> > cpsw, usb_ether
> > Hit any key to stop autoboot:  0
> > mmc0 is current device
> > SD/MMC found on device 0
> > reading bb-uEnv.txt
> > reading bbubldr
> > 237488 bytes read in 34 ms (6.7 MiB/s)
> > reading bboneblk.dtb
> > 13946 bytes read in 7 ms (1.9 MiB/s)
> > Booting from mmc ...
> > ## Starting application at 0x88000054 ...
> > Consoles: U-Boot console
> > Compatible API signature found @9f242240
> > Number of U-Boot devices: 2
> >
> > FreeBSD/armv6 U-Boot loader, Revision 1.2
> > (root at bernice, Sun Jul 21 22:07:44 MDT 2013)
> > DRAM:    512MB
> >
> > Device: disk
> > |
> > can't load 'kernel'
> >
> > Type '?' for a list of commands, 'help' for more detailed help.
> > loader> ls
> > /
> >  d  .snap
> >     .sujournal
> > loader>
> >
> >
> >
> > On Sun, Jul 21, 2013 at 4:02 PM, Rui Paulo <rpaulo at freebsd.org> wrote:
> > On 21 Jul 2013, at 14:42, Tom Everett <tom at khubla.com> wrote:
> >
> > > ls shows:
> > >
> > > /
> > > d  .snap
> > >    .sujournal
> > >
> > > and lsdev shows:
> > >
> > > disk devices:
> > >        disk0 (MMC)
> > >        disk0s1: DOS/Windows
> > >        disk0s2: FreeBSD
> > >        disk0s2a: FreeBSD UFS
> > > net devices:
> > >        net0:
> > >
> > > I'm doing a fresh checkout of the entire CURRENT source tree, a
> rebuild of
> > > dev and then a rebuild of the kernel.  We'll see what happens.
> >
> >
> > As you can see, your root file system has no files. This has happened to
> me in the past and I don't know why, but re-creating the image file with
> crochet seems to fix it.
> >
> > --
> > Rui Paulo
> >
> >
> >
> >
> > --
> > A better world shall emerge based on faith and understanding  - Douglas
> MacArthur
>
>


-- 
A better world shall emerge based on faith and understanding  - Douglas
MacArthur