My WLI-UC-GNM up crash

Mon Jul 15 04:21:16 UTC 2013

My WLI-UC-GNM ifconfig up when collapsed,
I do not know how to solve


root at FreeBSD:~ # ifconfig wlan create wlandev run0
wlan0: Ethernet address: 10:6f:3f:2b:fd:6d
wlan0
root at FreeBSD:~ # ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
run0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
        ether 10:6f:3f:2b:fd:6d
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
        status: no carrier
wlan0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 10:6f:3f:2b:fd:6d
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
        status: no carrier
        ssid "" channel 1 (2412 MHz 11b)
        country US authmode OPEN privacy OFF txpower 0 bmiss 7 scanvalid 60
        wme bintval 0
root at FreeBSD:~ # dhclient wlan0
wlan0: no link .............. giving up
root at FreeBSD:~ # pciconf -lv
pciconf: /dev/pci: No such file or directory
root at FreeBSD:~ # ifconfig wlan0 up scan
run0: firmware RT2870 ver. 0.236 loaded
root at FreeBSD:~ # Fatal kernel mode data abort: 'Alignment Fault 1'
trapframe: 0xde177d68
FSR=00000801, FAR=c24b3faf, spsr=00000013
r0 =c24b7000, r1 =c24b3faf, r2 =c24b720c, r3 =0000096c
r4 =80003eaf, r5 =c249c800, r6 =c24b7024, r7 =c0760898
r8 =c24b7000, r9 =00000014, r10=c055851d, r11=de177e18
r12=0000002e, ssp=de177db4, slr=00000000, pc =c04072d4

[ thread pid 0 tid 100038 ]
Stopped at      ieee80211_radiotap_chan_change+0x94:    strh    r3, [r1]
db> bt
Tracing pid 0 tid 100038 td 0xc232a620
_end() at 0xde177a90
        scp=0xde177a90 rlv=0xc04f5e48 (db_trace_thread+0x34)
        rsp=0xde177a74 rfp=0xc05b8750
Bad frame pointer: 0xc05b8750
db>


=
=dmesg==

sun4i#go 0x40200100
## Starting application at 0x40200100 ...
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #1: Sat Jul 13 23:09:25 CST 2013
    root at FreeBSD.7axu.com:/usr/obj/armv6/arm.arm/usr/src/sys/CB1G arm
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
WARNING: WITNESS option enabled, expect reduced performance.
CPU: Cortex A8-r3 rev 2 (Cortex-A core)
 Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
 WB disabled EABT branch prediction enabled
LoUU:2 LoC:2 LoUIS:1
Cache level 1:
 32KB/64B 4-way data cache WT WB Read-Alloc
 32KB/64B 4-way instruction cache Read-Alloc
Cache level 2:
 256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc
real memory  = 536870912 (512 MB)
avail memory = 513032192 (489 MB)
random device not loaded; using insecure entropy
simplebus0: <Flattened device tree simple bus> on fdtbus0
aintc0: <A10 AINTC Interrupt Controller> mem 0x1c20400-0x1c207ff on
simplebus0
a10_ccm0: <Allwinner Clock Control Module> mem 0x1c20000-0x1c203ff on
simplebus0
a10_timer0: <Allwinner A10 timer> mem 0x1c20c00-0x1c20c8f irq 22 on
simplebus0
Event timer "a10_timer Eventtimer" frequency 24000000 Hz quality 1000
Timecounter "a10_timer timer0" frequency 24000000 Hz quality 1000
a10wd0: <Allwinner A10 Watchdog> mem 0x1c20c90-0x1c20c97 on simplebus0
gpio0: <Allwinner GPIO controller> mem 0x1c20800-0x1c20bff irq 28 on
simplebus0
gpioc0: <GPIO controller> on gpio0
gpiobus0: <GPIO bus> on gpio0
ehci0: <Allwinner Integrated USB 2.0 controller> mem 0x1c14000-0x1c14fff
irq 39                                                on simplebus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci1: <Allwinner Integrated USB 2.0 controller> mem 0x1c1c000-0x1c1cfff
irq 40                                                on simplebus0
usbus1: EHCI version 1.0
usbus1 on ehci1
uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 1 on simplebus0
uart0: console (115200,n,8,1)
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
WARNING: WITNESS option enabled, expect reduced performance.
Root mount waiting for: usbus1 usbus0
ugen1.1: <Allwinner> at usbus1
uhub0: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <Allwinner> at usbus0
uhub1: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
Root mount waiting for: usbus1 usbus0
Root mount waiting for: usbus1 usbus0
ugen0.2: <Ralink> at usbus0
run0: <1.0> on usbus0
run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address
10:6f:3f:2b:fd                                               :6d
Root mount waiting for: usbus1
ugen1.2: <PNY> at usbus1
umass0: <PNY Lovely Attache, class 0/0, rev 2.00/11.00, addr 2> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x0100
umass0:0:0:-1: Attached to scbus0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <PNY Lovely Attache 1100> Removable Direct Access SCSI-4 device
da0: 40.000MB/s transfers
da0: 7722MB (15814656 512 byte sectors: 255H 63S/T 984C)
da0: quirks=0x2<NO_6_BYTE>
Trying to mount root from ufs:/dev/da0s2 []...
mountroot: waiting for device /dev/da0s2 ...
WARNING: / was not properly dismounted
WARNING: /: mount pending error: blocks 0 files 8
warning: no time-of-day clock registered, system time will not be set
accurately
lock order reversal:
 1st 0xc22d1598 pmap (pmap) @ /usr/src/sys/arm/arm/pmap-v6.c:2990
 2nd 0xc075e980 pmap pv global (pmap pv global) @
/usr/src/sys/arm/arm/pmap-v6.c
:695
KDB: stack backtrace:
_end() at 0xdbd05c30
        scp=0xdbd05c30 rlv=0xc04f6064 (db_trace_self+0x14)
        rsp=0xdbd05b18 rfp=0xc2193380
Bad frame pointer: 0xc2193380
lock order reversal:
 1st 0xc22d10b4 pmap (pmap) @ /usr/src/sys/arm/arm/pmap-v6.c:2990
 2nd 0xc08530f0 vm map (system) (vm map (system)) @
/usr/src/sys/vm/vm_kern.c:42                                               8
KDB: stack backtrace:
_end() at 0xde185aa4
        scp=0xde185aa4 rlv=0xc04f6064 (db_trace_self+0x14)
        rsp=0xde185988 rfp=0xc21930a8
Bad frame pointer: 0xc21930a8
Setting hostuuid: a91f5d90-ebd4-11e2-83d9-63219f70abff.
Setting hostid: 0x3599dde5.
No suitable dump device was found.
Entropy harvesting: interrupts ethernet point_to_pointsha256: /kernel: No
such f                                               ile or directory
 kickstart.
Starting file system checks: