FreeBSD/armv6z/clang on Raspberry Pi 512MB (with U-Boot + ubldr)

[Mats Mellstrand]

Hi


On 30 jan 2013, at 17:28, Daisuke Aoyama <aoyama at peach.ne.jp> wrote:

>> The image works, but I can't get IPv6 to work as expected.
>> I can ping6 to and from my Raspberry but trying to ssh in to RPIs IPv6 address just hangs.
>> The same happens when I try to ssh out from RPI to a IPv6 address.
>> IPv4 works.
> 
> Sorry, I didn't check with ue0.
> It seems if_smsc is buggy.
> I'm using axe for testing. It works IPv6.
> 
>> pi at raspberry-pi:~ % w
>> 4:19PM  up  2:50, 3 users, load averages: 0.00, 0.00, 0.00
>> USER       TTY      FROM                      LOGIN@  IDLE WHAT
>> root       u0       -                         4:11PM     - -csh (csh)
>> pi         pts/0    172.18.0.20               4:12PM     - _su (csh)
>> pi         pts/1    2001:3e0:6cf:18:20c:29ff  4:19PM     - w
>> pi at raspberry-pi:~ % ifconfig ue1
>> ue1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>>       options=80008<VLAN_MTU,LINKSTATE>
>>       ether 10:6f:3f:66:75:1d
>>       inet6 fe80::126f:3fff:fe66:751d%ue1 prefixlen 64 scopeid 0x3
>>       inet 172.18.0.99 netmask 0xffff0000 broadcast 172.18.255.255
>>       inet6 2001:3e0:6cf:18:126f:3fff:fe66:751d prefixlen 64
>>       nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
>>       media: Ethernet autoselect (100baseTX <full-duplex>)
>>       status: active
> 
> If possible, please try other ether device (include wireless LAN).


Thanks! The interface run0/wlan0  works fine with IPv6


/mm

> 
> Thanks,
> -- 
> Daisuke Aoyama