FreeBSD/armv6z/clang on Raspberry Pi 512MB (with U-Boot + ubldr)

[Roel Bouwman]

Hi Daisuke,

On Thu, Jan 10, 2013 at 06:23:10AM +0900, you (Daisuke Aoyama) wrote the following:
> After recovery, download new kernel then replace old one.
> 
> # fetch http://www.peach.ne.jp/archives/rpi/kernel/kernel-20130110.gz

This kernel has exactly the same issue:

FreeBSD 10.0-CURRENT #0 r244906M: Thu Jan 10 05:49:56 JST 2013
    aoyama at fbs.local:/usr/obj-rpi-clang/arm.armv6/usr/src/sys/RPI-B-test13 arm
...
Starting file system checks:
** SU+J Recovering /dev/mmcsd0s2a
** Reading 8388608 byte journal from inode 4.
** Building prid 65 (fsck_ufs), uid 0: exited on signal 11
ecovery table.
panic: Bad link elm 0xc10e3dc8 next->prev != elm
KDB: enter: panic
[ thread pid 65 tid 100049 ]
Stopped at      breakpoint:     ldrb    r15, [r15, r15, ror r15]!
db> bt
Tracing pid 65 tid 100049 td 0xc2fca620
end() at 0xd49ab9a8
scp=0xd49ab9a8 rlv=0xc03c8208 (db_trace_self+0x14)
        rsp=0xd49ab99c rfp=0xc04e6d14
Bad frame pointer: 0xc04e6d14

I'll just leave DMA disabled for now.

Regards,

Roel.