Globalscale Dreamplug and 8.3 RELEASE

[Richard E Neese]

On 8/1/2012 4:32 PM, Kristof Provost wrote:
> On 2012-08-01 12:32:44 (-0600), Ian Lepore <freebsd at damnhippie.dyndns.org> wrote:
>> I did some driver debugging to the point where I see the outgoing packet
>> buffers being handed to the hardware, and then shortly thereafter
>> TX-done interrupts happen, as if the packet was sent just fine.  But
>> either the bits never hit the wire, or the packets are malformed in some
>> way such that other boxes on my network can't see them arrive (using
>> tcpdump; I don't have any wire-level debugging tools).
>>
> At a guess, the problem is that the PHY address isn't getting programmed
> in the MAC. There should be a fix in 9.0 or 10.0.
>
> It's the /* Tell the MAC where to find the PHY so autoneg works */ bit
> in mge_attach in current.
>
> Regards,
> Kristof
>
> _______________________________________________
> freebsd-arm at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org

8.x is going to need work for older device
can you send me the dreamplg dts files from 8.x
I can compair them to 9.x and ty to fix your issue