ohci not detected on at91rm9200?

[Hans Petter Selasky]

On Thursday 16 July 2009 12:45:12 Krassimir Slavchev wrote:
> Hans Petter Selasky wrote:
> >> After adding cdce on arm board:
> >> cdce0: <USB Ethernet Comm interface> on usbus0
> >> ue0: <USB Ethernet> on cdce0
> >> ue0: Ethernet address: 2a:23:45:67:89:54
> >>
> >> ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
> >> 1500 ether 2a:23:45:67:89:54
> >>
> >>
> >> But on the other side running 7.2:
> >> cdce0: <FreeBSD foundation USB Ethernet Adapter, class 2/0, rev
> >> 1.10/1.00, addr 2> on uhub4
> >> cdce0: setting alternate interface failed
> >> device_attach: cdce0 attach returned 6
> >
> > Maybe the following patch helps on the ARM side:
> >
> > http://perforce.freebsd.org/chv.cgi?CH=166156
> >
> > I'm going to test this setup, and will probably resolve the issue, if I
> > find any, including the cache sync stuff.
>
> I have made these changes on the ARM side but the error is same.

Hi,

You also need this fix, in addition to the previous one.

http://perforce.freebsd.org/chv.cgi?CH=166168

CDC-ethernet should work now.

--HPS