ohci not detected on at91rm9200?

[Hans Petter Selasky]

On Wednesday 15 July 2009 15:23:14 Krassimir Slavchev wrote:
> Hans Petter Selasky wrote:
> >> It is detected but after configuring the interface I cannot send/receive

> >
> > You need to "ifconfig up" the interface on both sides before any traffic
> > will pass.
>
> Of course they are:
>
> cdce0:
> flags=108c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST,NEEDSGIANT>
> metric 0 mtu 1500
>         ether 2a:00:00:00:00:00
>         inet 192.168.2.121 netmask 0xffffff00 broadcast 192.168.2.255
>         media: Ethernet 10baseT/UTP
>         status: active
>
> ate0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>         options=8<VLAN_MTU>
>         ether 43:00:00:01:ff:00
>         inet 192.168.2.189 netmask 0xffffff00 broadcast 192.168.2.255
>         media: Ethernet autoselect (100baseTX <full-duplex>)
>         status: active

You should have cdce devices on both sides, PC and Host. Looks like there will 
be a network conflict if you use 192.168.2.xx for both network devices when  
they are not on the same cable.

?

--HPS