IIC support?
M. Warner Losh
imp at bsdimp.com
Mon Mar 5 14:31:38 UTC 2007
In message: <45EC2667.9040004 at bulinfo.net>
Krassimir Slavchev <krassi at bulinfo.net> writes:
: Warner Losh wrote:
: >> I have problems to access the iic eeprom from userland. Even after set
: >> SCAN_IICBUS in iicbus.c nothing has been detected. I have made some
: >> tests from the bootloader to read/write from/to the eeprom and they work.
: >> Is there any known problems with TWI or any differences between board
: >> settings?
: >>
: >
: > The IIC bus is not a self enumerating bus. Bad things happen when you
: > go out and try to 'probe' it, although often you can get away with
: > that. FreeBSD takes a conservative approach. You need hints for each
: > iic device on bus that you have on your board.
: >
: >
: Ok, that was just for testing.
:
: I am trying to write a driver for pcf8563 (RTC similar to ds1672) but
: when I call the iicbus_transfer() function the iicbus_transfer_gen() is
: called instead of at91_twi_transfer().
: In the kernel config file I have:
: ...
: device at91_twi
: device iicbus
: ...
:
: Is this correct or I miss something else?
Should be correct. What version of FreeBSD are you using?
Warner
More information about the freebsd-arm
mailing list