CENTIPAD boot
Krassimir Slavchev
krassi at bulinfo.net
Wed Aug 8 13:53:38 UTC 2007
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Yes
M. Warner Losh wrote:
> can you resend them as a unified diff?
>
> Warner
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (FreeBSD)
iD8DBQFGucrYxJBWvpalMpkRAj4oAJwOYAKhGu2P20acoOPgrkEQSjyETwCgnvjq
DNWbeBl9Wlk2oIVy6bwUJdY=
=sEQp
-----END PGP SIGNATURE-----
-------------- next part --------------
Index: boot0spi/main.c
===================================================================
RCS file: /home/ncvs/src/sys/boot/arm/at91/boot0spi/main.c,v
retrieving revision 1.5
diff -u -r1.5 main.c
--- boot0spi/main.c 20 Dec 2006 17:50:02 -0000 1.5
+++ boot0spi/main.c 8 Aug 2007 13:49:19 -0000
@@ -47,10 +47,10 @@
continue;
// Need extra copy at addr3
memcpy(addr3, addr, (len + FLASH_PAGE_SIZE - 1) / FLASH_PAGE_SIZE * FLASH_PAGE_SIZE);
- printf("Writing %u bytes to flash at %u\n", len, OFFSET);
+ printf("Writing %u bytes to flash at %u\n", len, LOADER_OFFSET);
for (i = 0; i < len; i+= FLASH_PAGE_SIZE) {
for (j = 0; j < 10; j++) {
- off = i + OFFSET;
+ off = i + LOADER_OFFSET;
SPI_WriteFlash(off, addr + i, FLASH_PAGE_SIZE);
SPI_ReadFlash(off, addr2 + i, FLASH_PAGE_SIZE);
if (p_memcmp(addr3 + i, addr2 + i, FLASH_PAGE_SIZE) == 0)
Index: bootspi/loader_prompt.c
===================================================================
RCS file: /home/ncvs/src/sys/boot/arm/at91/bootspi/loader_prompt.c,v
retrieving revision 1.4
diff -u -r1.4 loader_prompt.c
--- bootspi/loader_prompt.c 15 Mar 2007 03:31:48 -0000 1.4
+++ bootspi/loader_prompt.c 8 Aug 2007 13:49:21 -0000
@@ -29,7 +29,6 @@
#include "env_vars.h"
#include "lib.h"
#include "spi_flash.h"
-#include "ee.h"
/******************************* GLOBALS *************************************/
@@ -286,8 +285,9 @@
{
char buf[25];
printf("Testing Config EEPROM\n");
- EEWrite(0, "This is a test", 15);
- EERead(0, buf, 15);
+ strcpy(buf,"This is a test!");
+ WriteEEPROM(0, buf, 15);
+ ReadEEPROM(0, buf, 15);
printf("Found '%s'\n", buf);
break;
}
Index: bootspi/main.c
===================================================================
RCS file: /home/ncvs/src/sys/boot/arm/at91/bootspi/main.c,v
retrieving revision 1.3
diff -u -r1.3 main.c
--- bootspi/main.c 21 Oct 2006 22:44:26 -0000 1.3
+++ bootspi/main.c 8 Aug 2007 13:49:21 -0000
@@ -41,18 +41,19 @@
#include "emac.h"
#include "lib.h"
#include "spi_flash.h"
-#include "ee.h"
+#include "sd-card.h"
int
main(void)
{
printf("\nBoot\n");
- EEInit();
+ InitEEPROM();
SPI_InitFlash();
#ifdef TSC_FPGA
fpga_load();
#endif
EMAC_Init();
+ sdcard_init();
LoadBootCommands();
if (getc(1) == -1) {
start_wdog(30);
Index: libat91/Makefile
===================================================================
RCS file: /home/ncvs/src/sys/boot/arm/at91/libat91/Makefile,v
retrieving revision 1.9
diff -u -r1.9 Makefile
--- libat91/Makefile 13 Jul 2007 14:27:04 -0000 1.9
+++ libat91/Makefile 8 Aug 2007 13:49:22 -0000
@@ -8,7 +8,7 @@
putchar.c printf.c reset.c spi_flash.c xmodem.c \
sd-card.c strcvt.c strlen.c strcmp.c memcpy.c strcpy.c \
memset.c memcmp.c
-SRCS+=ashldi3.c divsi3.c
+SRCS+=ashldi3.c divsi3.S
NO_MAN=
.if ${MK_TAG_LIST} != "no"
Index: libat91/arm_init.S
===================================================================
RCS file: /home/ncvs/src/sys/boot/arm/at91/libat91/arm_init.S,v
retrieving revision 1.2
diff -u -r1.2 arm_init.S
--- libat91/arm_init.S 20 Dec 2006 18:16:49 -0000 1.2
+++ libat91/arm_init.S 8 Aug 2007 13:49:22 -0000
@@ -61,7 +61,7 @@
#ifdef BOOT_IIC
.long (TWI_EEPROM_SIZE >> 9)
#else
-#ifdef BOOT_BWCT
+#if defined(BOOT_BWCT) | defined(BOOT_CENTIPAD)
.long ((528 << 17) | (13 << 13) | (12 * 2))
#else
.long ((1056 << 17) | (13 << 13) | (12 * 2))
Index: libat91/eeprom.c
===================================================================
RCS file: /home/ncvs/src/sys/boot/arm/at91/libat91/eeprom.c,v
retrieving revision 1.3
diff -u -r1.3 eeprom.c
--- libat91/eeprom.c 20 Dec 2006 18:19:52 -0000 1.3
+++ libat91/eeprom.c 8 Aug 2007 13:49:23 -0000
@@ -33,7 +33,11 @@
/* Use a macro to calculate the TWI clock generator value to save code space. */
#define AT91C_TWSI_CLOCK 100000
-#define TWSI_EEPROM_ADDRESS 0x50
+#ifdef BOOT_CENTIPAD
+#define TWSI_EEPROM_ADDRESS 0x57
+#else
+#define TWSI_EEPROM_ADDRESS 0x50
+#endif
#define TWI_CLK_BASE_DIV ((AT91C_MASTER_CLOCK/(4*AT91C_TWSI_CLOCK)) - 2)
#define SET_TWI_CLOCK ((0x00010000) | (TWI_CLK_BASE_DIV) | (TWI_CLK_BASE_DIV << 8))
Index: libat91/emac.c
===================================================================
RCS file: /home/ncvs/src/sys/boot/arm/at91/libat91/emac.c,v
retrieving revision 1.8
diff -u -r1.8 emac.c
--- libat91/emac.c 13 Jul 2007 14:27:04 -0000 1.8
+++ libat91/emac.c 8 Aug 2007 13:49:25 -0000
@@ -321,7 +321,7 @@
if (serverPort != udpHdr->src_port)
break;
- TFTP_ACK_Data(tftpHdr->data,
+ TFTP_ACK_Data((char *)tftpHdr->data,
SWAP16(tftpHdr->block_num),
SWAP16(udpHdr->udp_len) - 12);
}
@@ -339,9 +339,9 @@
*/
#ifndef BOOT_BWCT
static unsigned short
-AT91F_MII_ReadPhy (AT91PS_EMAC pEmac, unsigned char addr)
+AT91F_MII_ReadPhy (AT91PS_EMAC pEmac, unsigned char phyaddr, unsigned char addr)
{
- unsigned value = 0x60020000 | (addr << 18);
+ unsigned value = 0x60020000 | ((phyaddr & 0x1f) << 23) | (addr << 18);
pEmac->EMAC_CTL |= AT91C_EMAC_MPE;
pEmac->EMAC_MAN = value;
@@ -359,9 +359,9 @@
*/
#ifdef BOOT_TSC
static unsigned short
-AT91F_MII_WritePhy (AT91PS_EMAC pEmac, unsigned char addr, unsigned short s)
+AT91F_MII_WritePhy (AT91PS_EMAC pEmac, unsigned char phyaddr, unsigned char addr, unsigned short s)
{
- unsigned value = 0x50020000 | (addr << 18) | s;
+ unsigned value = 0x50020000 | ((phyaddr & 0x1f) << 23) | (addr << 18) | s;
pEmac->EMAC_CTL |= AT91C_EMAC_MPE;
pEmac->EMAC_MAN = value;
@@ -380,6 +380,7 @@
static void
MII_GetLinkSpeed(AT91PS_EMAC pEmac)
{
+ unsigned char phyaddr = 0;
#if defined(BOOT_TSC) || defined(BOOT_KB920X) || defined(BOOT_CENTIPAD)
unsigned short stat2;
#endif
@@ -388,14 +389,18 @@
unsigned sec;
int i;
#endif
-#ifdef BOOT_BWCT
+#ifdef BOOT_CENTIPAD
+ phyaddr = 0x10;
+#endif
+
+#if defined(BOOT_BWCT) | defined(BOOT_CENTIPAD)
/* hardcoded link speed since we connect a switch via MII */
update = pEmac->EMAC_CFG & ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
update |= AT91C_EMAC_SPD;
update |= AT91C_EMAC_FD;
#endif
#if defined(BOOT_KB920X) || defined(BOOT_CENTIPAD)
- stat2 = AT91F_MII_ReadPhy(pEmac, MII_STS2_REG);
+ stat2 = AT91F_MII_ReadPhy(pEmac, phyaddr, MII_STS2_REG);
if (!(stat2 & MII_STS2_LINK))
return ;
update = pEmac->EMAC_CFG & ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
@@ -407,7 +412,7 @@
#ifdef BOOT_TSC
while (1) {
for (i = 0; i < 10; i++) {
- stat2 = AT91F_MII_ReadPhy(pEmac, MII_STS_REG);
+ stat2 = AT91F_MII_ReadPhy(pEmac, phyaddr, MII_STS_REG);
if (stat2 & MII_STS_LINK_STAT)
break;
printf(".");
@@ -418,11 +423,11 @@
if (stat2 & MII_STS_LINK_STAT)
break;
printf("Resetting MII...");
- AT91F_MII_WritePhy(pEmac, 0x0, 0x8000);
- while (AT91F_MII_ReadPhy(pEmac, 0x0) & 0x8000) continue;
+ AT91F_MII_WritePhy(pEmac, phyaddr, 0x0, 0x8000);
+ while (AT91F_MII_ReadPhy(pEmac, phyaddr, 0x0) & 0x8000) continue;
}
printf("emac: link");
- stat2 = AT91F_MII_ReadPhy(pEmac, MII_SPEC_STS_REG);
+ stat2 = AT91F_MII_ReadPhy(pEmac, phyaddr, MII_SPEC_STS_REG);
update = pEmac->EMAC_CFG & ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
if (stat2 & (MII_SSTS_100FDX | MII_SSTS_100HDX)) {
printf(" 100TX");
Index: libat91/emac_init.c
===================================================================
RCS file: /home/ncvs/src/sys/boot/arm/at91/libat91/emac_init.c,v
retrieving revision 1.4
diff -u -r1.4 emac_init.c
--- libat91/emac_init.c 20 Dec 2006 18:26:37 -0000 1.4
+++ libat91/emac_init.c 8 Aug 2007 13:49:26 -0000
@@ -94,7 +94,7 @@
AT91C_PA8_ETXEN | AT91C_PA16_EMDIO | AT91C_PA9_ETX0 |
AT91C_PA10_ETX1 | AT91C_PA11_ECRS_ECRSDV | AT91C_PA15_EMDC |
AT91C_PA7_ETXCK_EREFCK;
-#if defined(BOOT_KB920X) | defined(BOOT_BWCT) /* Really !RMII */
+#if defined(BOOT_KB920X) | defined(BOOT_BWCT) | defined(BOOT_CENTIPAD) /* Really !RMII */
AT91C_BASE_PIOB->PIO_BSR =
AT91C_PB12_ETX2 | AT91C_PB13_ETX3 | AT91C_PB14_ETXER |
AT91C_PB15_ERX2 | AT91C_PB16_ERX3 | AT91C_PB17_ERXDV |
Index: libat91/spi_flash.c
===================================================================
RCS file: /home/ncvs/src/sys/boot/arm/at91/libat91/spi_flash.c,v
retrieving revision 1.4
diff -u -r1.4 spi_flash.c
--- libat91/spi_flash.c 28 Mar 2007 22:38:01 -0000 1.4
+++ libat91/spi_flash.c 8 Aug 2007 13:49:26 -0000
@@ -119,7 +119,7 @@
byteAddress = flash_addr % FLASH_PAGE_SIZE;
p_memset(tx_commandBuffer, 0, 8);
-#ifdef BOOT_BWCT
+#if defined(BOOT_BWCT) | defined(BOOT_CENTIPAD)
tx_commandBuffer[0] = 0xd2;
tx_commandBuffer[1] = ((pageAddress >> 6) & 0xFF);
tx_commandBuffer[2] = ((pageAddress << 2) & 0xFC) |
@@ -177,7 +177,7 @@
byteAddress = flash_addr % FLASH_PAGE_SIZE;
p_memset(tx_commandBuffer, 0, 8);
-#ifdef BOOT_BWCT
+#if defined(BOOT_BWCT) | defined(BOOT_CENTIPAD)
tx_commandBuffer[0] = 0x82;
tx_commandBuffer[1] = ((pageAddress >> 6) & 0xFF);
tx_commandBuffer[2] = ((pageAddress << 2) & 0xFC) |
@@ -256,7 +256,7 @@
value = pSPI->SPI_RDR;
value = pSPI->SPI_SR;
-#ifdef BOOT_BWCT
+#if defined(BOOT_BWCT) | defined(BOOT_CENTIPAD)
if (((value = GetFlashStatus()) & 0xFC) != 0xB4)
printf(" Bad SPI status: 0x%x\n", value);
#else
Index: libat91/spi_flash.h
===================================================================
RCS file: /home/ncvs/src/sys/boot/arm/at91/libat91/spi_flash.h,v
retrieving revision 1.2
diff -u -r1.2 spi_flash.h
--- libat91/spi_flash.h 20 Dec 2006 18:25:16 -0000 1.2
+++ libat91/spi_flash.h 8 Aug 2007 13:49:26 -0000
@@ -40,7 +40,7 @@
void SPI_GetId(unsigned *id);
-#ifdef BOOT_BWCT
+#if defined(BOOT_BWCT) | defined(BOOT_CENTIPAD)
#define FLASH_PAGE_SIZE 528
#else
#define FLASH_PAGE_SIZE 1056
More information about the freebsd-arm
mailing list