Question about "make trampoline" on FreeBSD

[David Sharp]

On 2006.11.23 17:57:56 +0000, M. Warner Losh wrote:
> SD root isn't that slow.  I get from power on to login prompt in 1
> minute on the machines at work as well as the KB9202 boards.  Over NFS
> root it takes about the same amount of time.  Maybe there's something
> weird in your setup...

NFS is quite a bit faster than SD for me, so as you suggest my hw is
prolly broken.  i think i got all the pullups in the right place.  it
has not failed to load but is just slow to read/write.  perhaps 
another sd card might fix things.  are the ...bus width to 1 messages
normal?

Timecounter "AT91RM9200 timer" frequency 32768 Hz quality 1000
Timecounters tick every 7.812 msec
at91_mci0: Setting controller bus width to 1
at91_mci0: Setting controller bus width to 1
at91_mci0: Setting controller bus width to 1
at91_mci0: Setting controller bus width to 1
at91_mci0: Setting controller bus width to 1
at91_mci0: Setting controller bus width to 1
SD CARD: 500695040 bytes
at91_mci0: Setting controller bus width to 1
mmcsd0: <mmc or sd flash card> on mmc0
mmc0: setting transfer rate to 30.000MHz
at91_mci0: Setting controller bus width to 1
Trying to mount root from ufs:mmcsd0s1a