[Fwd: mod_snake-0.5.0_1 failed on amd64 5]

Pav Lucistnik pav at FreeBSD.org
Wed Jun 27 16:05:18 UTC 2007


-------- Přeposlaná zpráva --------
> Od: User Ports-amd64 <ports-amd64 at freebsd.org>
> Komu: kris at freebsd.org, pav at freebsd.org
> Předmět: mod_snake-0.5.0_1 failed on amd64 5
> Datum: Wed, 27 Jun 2007 15:41:39 GMT
> 
> building mod_snake-0.5.0_1 on hammer3.isc.gumbysoft.com
> in directory /usr2/pkgbuild/5/chroot/3
> building for: 5.5-STABLE amd64
> maintained by: apache at FreeBSD.org
> port directory: /usr/ports/www/mod_snake
> build started at Wed Jun 27 15:41:06 UTC 2007
> FETCH_DEPENDS=
> PATCH_DEPENDS=
> EXTRACT_DEPENDS=
> BUILD_DEPENDS=apache-1.3.37_4.tbz expat-2.0.0_1.tbz gettext-0.16.1_3.tbz gmake-3.81_2.tbz libiconv-1.9.2_2.tbz perl-5.8.8.tbz python24-2.4.4.tbz
> RUN_DEPENDS=apache-1.3.37_4.tbz expat-2.0.0_1.tbz perl-5.8.8.tbz python24-2.4.4.tbz
> prefixes: LOCALBASE=usr/local X11BASE=usr/local
> add_pkg
> ================================================================
> ====================<phase 1: make checksum>====================
> => mod_snake-0.5.0.tar.bz2 doesn't seem to exist in /tmp/distfiles/.
> => Attempting to fetch from ftp://freebsd.isc.org/pub/FreeBSD/ports/distfiles/.
> mod_snake-0.5.0.tar.bz2                                195 kB 1397 kBps
> => MD5 Checksum OK for mod_snake-0.5.0.tar.bz2.
> => SHA256 Checksum OK for mod_snake-0.5.0.tar.bz2.
> ================================================================
> ====================<phase 2: make extract>====================
> add_pkg
> ===>  Extracting for mod_snake-0.5.0_1
> => MD5 Checksum OK for mod_snake-0.5.0.tar.bz2.
> => SHA256 Checksum OK for mod_snake-0.5.0.tar.bz2.
> ================================================================
> ====================<phase 3: make patch>====================
> add_pkg
> ===>  Patching for mod_snake-0.5.0_1
> ================================================================
> ====================<phase 4: make build>====================
> add_pkg apache-1.3.37_4.tbz expat-2.0.0_1.tbz gettext-0.16.1_3.tbz gmake-3.81_2.tbz libiconv-1.9.2_2.tbz perl-5.8.8.tbz python24-2.4.4.tbz
> adding dependencies
> pkg_add apache-1.3.37_4.tbz
> Removing stale symlinks from /usr/bin...
>     Skipping /usr/bin/perl
>     Skipping /usr/bin/perl5
> Done.
> Creating various symlinks in /usr/bin...
>     Symlinking /usr/local/bin/perl5.8.8 to /usr/bin/perl
>     Symlinking /usr/local/bin/perl5.8.8 to /usr/bin/perl5
> Done.
> Cleaning up /etc/make.conf... Done.
> Spamming /etc/make.conf... Done.
> Cleaning up /etc/manpath.config... Done.
> Spamming /etc/manpath.config... Done.
> 
> ===>  COMPATIBILITY NOTE:
>       As of version 1.3.24, the RedirectMatch directive requires an
>       absolute URL target location per RFC 2068. Uses of RedirectMatch that
>       specify a relative URL will fail and must be corrected to function.
> 
> ===>  BE CAREFULL HOW TO BOOT on 1.3.29_4 or after:
> 	To run apache www server from startup, add apache_enable="YES"
> 	in your /etc/rc.conf.
> 
> pkg_add expat-2.0.0_1.tbz
> skipping expat-2.0.0_1, already added
> pkg_add gettext-0.16.1_3.tbz
> pkg_add gmake-3.81_2.tbz
> pkg_add libiconv-1.9.2_2.tbz
> skipping libiconv-1.9.2_2, already added
> pkg_add perl-5.8.8.tbz
> skipping perl-5.8.8, already added
> pkg_add python24-2.4.4.tbz
> 
> ====
> Note that some of the standard modules are provided as separate
> ports since they require extra dependencies:
> 
> bsddb		databases/py-bsddb
> gdbm		databases/py-gdbm
> tkinter		x11-toolkits/py-tkinter
> 
> Install them as needed.
> ====
> 
> ===>   mod_snake-0.5.0_1 depends on file: /usr/local/bin/python - found
> ===>   mod_snake-0.5.0_1 depends on file: /usr/local/sbin/apxs - found
> ===>   mod_snake-0.5.0_1 depends on executable in : gmake - found
> ===>   mod_snake-0.5.0_1 depends on file: /usr/local/sbin/apxs - found
> ===>  Configuring for mod_snake-0.5.0_1
> creating cache ./config.cache
> checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
> checking whether build environment is sane... yes
> checking whether gmake sets ${MAKE}... yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking for gcc... cc
> checking whether the C compiler (cc -O -pipe  ) works... yes
> checking whether the C compiler (cc -O -pipe  ) is a cross-compiler... no
> checking whether we are using GNU C... yes
> checking whether cc accepts -g... yes
> checking for ranlib... ranlib
> checking whether to enable maintainer-specific portions of Makefiles... no
> checking how to run the C preprocessor... cc -E
> checking for user specified Python binary... No, using default
> checking for Python... Python version 2.4 found!
> checking for Python base path... /usr/local/lib/python2.4/config
> checking for CC in /usr/local/lib/python2.4/config/Makefile... cc
> checking for CCSHARED in /usr/local/lib/python2.4/config/Makefile... -fPIC
> checking for CFLAGS in /usr/local/lib/python2.4/config/Makefile... -fno-strict-aliasing -DNDEBUG -O -pipe -D__wchar_t=wchar_t -DTHREAD_STACK_SIZE=0x20000
> checking for LDFLAGS in /usr/local/lib/python2.4/config/Makefile... -pthread
> checking for LDLIBRARY in /usr/local/lib/python2.4/config/Makefile... libpython2.4.a
> checking for LDSHARED in /usr/local/lib/python2.4/config/Makefile... cc -shared -pthread
> checking for LIBC in /usr/local/lib/python2.4/config/Makefile... 
> checking for LIBM in /usr/local/lib/python2.4/config/Makefile... -lm
> checking for LIBS in /usr/local/lib/python2.4/config/Makefile... -lpthread -lutil
> checking for LINKCC in /usr/local/lib/python2.4/config/Makefile... c++
> checking for LINKFORSHARED in /usr/local/lib/python2.4/config/Makefile... -Wl,--export-dynamic
> checking for MODLIBS in /usr/local/lib/python2.4/config/Makefile... 
> checking for OPT in /usr/local/lib/python2.4/config/Makefile... -DNDEBUG -O -pipe -D__wchar_t=wchar_t -DTHREAD_STACK_SIZE=0x20000
> checking for SO in /usr/local/lib/python2.4/config/Makefile... .so
> checking for SYSLIBS in /usr/local/lib/python2.4/config/Makefile... -lm
> checking for /usr/local/include/python2.4/Python.h... yes
> checking for ANSI C header files... yes
> checking whether cc needs -traditional... no
> checking for Apache include files... no
> checking for APXS... yes, 1.3
> updating cache ./config.cache
> creating ./config.status
> creating Makefile
> creating doc/Makefile
> creating src/Makefile
> creating src/libmod_snake.module
> creating examples/Makefile
> creating examples/tut/Makefile
> creating snake_lib/Makefile
> creating examples/filters/Makefile
> creating testsuite/conf/conf-prefix
> creating testsuite/conf/conf-postfix
> creating testsuite/conf/httpd2.0.conf
> creating testsuite/conf/httpd1.3.conf
> creating testsuite/server_config.py
> creating testsuite/Makefile
> creating src/config.h
> ===>  Building for mod_snake-0.5.0_1
> gmake[1]: Entering directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/src'
> cc -fPIC -DAPACHE13 -I/usr/local/include/apache     \
> 		-I/usr/local/include/python2.4 -O -pipe  -DNDEBUG -O -pipe -D__wchar_t=wchar_t -DTHREAD_STACK_SIZE=0x20000 -c mod_snake.c -o mod_snake.lo
> mod_snake.c: In function `mod_snake_internal_directive_take1':
> mod_snake.c:1050: warning: cast from pointer to integer of different size
> mod_snake.c: In function `internal_directive_cleanup':
> mod_snake.c:1140: warning: cast from pointer to integer of different size
> cc -fPIC -DAPACHE13 -I/usr/local/include/apache     \
> 		-I/usr/local/include/python2.4 -O -pipe  -DNDEBUG -O -pipe -D__wchar_t=wchar_t -DTHREAD_STACK_SIZE=0x20000 -c mod_snake_bucket.c -o mod_snake_bucket.lo
> cc -fPIC -DAPACHE13 -I/usr/local/include/apache     \
> 		-I/usr/local/include/python2.4 -O -pipe  -DNDEBUG -O -pipe -D__wchar_t=wchar_t -DTHREAD_STACK_SIZE=0x20000 -c mod_snake_buf.c -o mod_snake_buf.lo
> cc -fPIC -DAPACHE13 -I/usr/local/include/apache     \
> 		-I/usr/local/include/python2.4 -O -pipe  -DNDEBUG -O -pipe -D__wchar_t=wchar_t -DTHREAD_STACK_SIZE=0x20000 -c mod_snake_py.c -o mod_snake_py.lo
> cc -fPIC -DAPACHE13 -I/usr/local/include/apache     \
> 		-I/usr/local/include/python2.4 -O -pipe  -DNDEBUG -O -pipe -D__wchar_t=wchar_t -DTHREAD_STACK_SIZE=0x20000 -c mod_snake_wrap.c -o mod_snake_wrap.lo
> mod_snake_wrap.c: In function `_wrap_conn_rec_write':
> mod_snake_wrap.c:3225: warning: passing arg 3 of `conn_rec_write' from incompatible pointer type
> cc -fPIC -DAPACHE13 -I/usr/local/include/apache     \
> 		-I/usr/local/include/python2.4 -O -pipe  -DNDEBUG -O -pipe -D__wchar_t=wchar_t -DTHREAD_STACK_SIZE=0x20000 -c snake_modules.c -o snake_modules.lo
> cc -fPIC -DAPACHE13 -I/usr/local/include/apache     \
> 		-I/usr/local/include/python2.4 -O -pipe  -DNDEBUG -O -pipe -D__wchar_t=wchar_t -DTHREAD_STACK_SIZE=0x20000 -c snake_precompile.c -o snake_precompile.lo
> cc -shared -pthread -o libmod_snake.so                                   \
> 		mod_snake.lo mod_snake_bucket.lo mod_snake_buf.lo mod_snake_py.lo mod_snake_wrap.lo snake_modules.lo snake_precompile.lo /usr/local/lib/python2.4/config/libpython2.4.a  -lpthread -lutil -lm 
> /usr/bin/ld: /usr/local/lib/python2.4/config/libpython2.4.a(abstract.o): relocation R_X86_64_32 can not be used when making a shared object; recompile with -fPIC
> /usr/local/lib/python2.4/config/libpython2.4.a: could not read symbols: Bad value
> gmake[1]: *** [libmod_snake.so] Error 1
> gmake[1]: Leaving directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/src'
> gmake[1]: Entering directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/examples'
> gmake[1]: Nothing to be done for `all'.
> gmake[1]: Leaving directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/examples'
> gmake[1]: Entering directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/snake_lib'
> gmake[1]: Nothing to be done for `all'.
> gmake[1]: Leaving directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/snake_lib'
> gmake[1]: Entering directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/doc'
> gmake[1]: Nothing to be done for `all'.
> gmake[1]: Leaving directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/doc'
> gmake[1]: Entering directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/testsuite'
> gmake[1]: Nothing to be done for `all'.
> gmake[1]: Leaving directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/testsuite'
> ================================================================
> ====================<phase 5: make test>====================
> make: don't know how to make regression-test(continuing)
> ================================================================
> ====================<phase 6: make install>====================
> add_pkg apache-1.3.37_4.tbz expat-2.0.0_1.tbz perl-5.8.8.tbz python24-2.4.4.tbz
> adding dependencies
> pkg_add apache-1.3.37_4.tbz
> skipping apache-1.3.37_4, already added
> pkg_add expat-2.0.0_1.tbz
> skipping expat-2.0.0_1, already added
> pkg_add perl-5.8.8.tbz
> skipping perl-5.8.8, already added
> pkg_add python24-2.4.4.tbz
> skipping python24-2.4.4, already added
> ===>  Installing for mod_snake-0.5.0_1
> ===>   mod_snake-0.5.0_1 depends on file: /usr/local/bin/python - found
> ===>   mod_snake-0.5.0_1 depends on file: /usr/local/sbin/apxs - found
> ===>   mod_snake-0.5.0_1 depends on file: /usr/local/sbin/apxs - found
> ===>   Generating temporary packing list
> ===>  Checking if www/mod_snake already installed
> gmake[1]: Entering directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/src'
> cc -shared -pthread -o libmod_snake.so                                   \
> 		mod_snake.lo mod_snake_bucket.lo mod_snake_buf.lo mod_snake_py.lo mod_snake_wrap.lo snake_modules.lo snake_precompile.lo /usr/local/lib/python2.4/config/libpython2.4.a  -lpthread -lutil -lm 
> /usr/bin/ld: /usr/local/lib/python2.4/config/libpython2.4.a(abstract.o): relocation R_X86_64_32 can not be used when making a shared object; recompile with -fPIC
> /usr/local/lib/python2.4/config/libpython2.4.a: could not read symbols: Bad value
> gmake[1]: *** [libmod_snake.so] Error 1
> gmake[1]: Leaving directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/src'
> gmake[1]: Entering directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/examples'
> gmake[1]: Nothing to be done for `install'.
> gmake[1]: Leaving directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/examples'
> gmake[1]: Entering directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/snake_lib'
> gmake[1]: Nothing to be done for `install'.
> gmake[1]: Leaving directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/snake_lib'
> gmake[1]: Entering directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/doc'
> gmake[1]: Nothing to be done for `install'.
> gmake[1]: Leaving directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/doc'
> gmake[1]: Entering directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/testsuite'
> gmake[1]: Nothing to be done for `install'.
> gmake[1]: Leaving directory `/work/a/ports/www/mod_snake/work/mod_snake-0.5.0/testsuite'
> ===>   Registering installation for mod_snake-0.5.0_1
> ================================================================
> ====================<phase 7: make package>====================
> ===>  Building package for mod_snake-0.5.0_1
> tar: libexec/apache/libmod_snake.so: Could not stat: No such file or directory
> pkg_create: make_dist: tar command failed with code 256
> Creating package /tmp/packages/All/mod_snake-0.5.0_1.tbz
> Registering depends: apache-1.3.37_4 expat-2.0.0_1 perl-5.8.8 python24-2.4.4.
> Creating bzip'd tar ball in '/tmp/packages/All/mod_snake-0.5.0_1.tbz'
> *** Error code 1
> 
> Stop in /a/ports/www/mod_snake.
> ================================================================
> build of /usr/ports/www/mod_snake ended at Wed Jun 27 15:41:45 UTC 2007

-- 
Pav Lucistnik <pav at oook.cz>
              <pav at FreeBSD.org>

lofi> My _sympathetic_ opinion about kdevelop is that it's a huge pile
of shit that might at least work okay if used in Linux.
lofi> My neutral opinion is that it's just a huge pile of shit.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: Toto je =?UTF-8?Q?digit=C3=A1ln=C4=9B?=
	=?ISO-8859-1?Q?_podepsan=E1?= =?UTF-8?Q?_=C4=8D=C3=A1st?=
	=?ISO-8859-1?Q?_zpr=E1vy?=
Url : http://lists.freebsd.org/pipermail/freebsd-apache/attachments/20070627/f4accf24/attachment.pgp


More information about the freebsd-apache mailing list