2.2-961006-SNAP released

Jordan K. Hubbard jkh at time.cdrom.com
Mon Oct 7 12:39:52 PDT 1996

And in its usual place at:


>From the release notes:

                                 RELEASE NOTES
                          FreeBSD Release 2.2 SNAPSHOT

0. What's new since 2.2-960801-SNAP?
Support for HP PC Lan+ cards (model numbers: 27247B and 27252A)

Update to gcc & add support for weak symbols.

Many things moved/brought into /usr/src/contrib, updating and
cleaning up the source tree accordingly.

Support for compiled-in shared library ld paths.

Update sgmlfmt to `instant'.

Protection against the widely reported SYN attack.

Many changes to UserConfig (boot -c):
	Now displays PCI devices.

	Can be preloaded with commands by saying something like:
		printf "USERCONFIG\ndis aha0\ndis aic0" | \
			dd of=/dev/rfd0 seek=1 bs=512 count=1 conv=sync

	Now launched by default (in boot.flp) unless overridden
	with user commands (see above).

mouse support in syscons (no man page, unfortunately - see /etc/sysconfig
for setup information).

There is now a standard, works-as-an-unprivileged-user-process
mechanism for retrieving interface statistics (note: New kernels and
old ifconfig(8) binaries don't mix as a result).

1. What's New since 2.1.0-RELEASE?
A considerable number of changes to the VM system have been made
to increase the stability under certain types of load.  If you
had panics under the last snapshot, try this one and see if they

The AHC driver now does considerably more in the way of handling errors

More cosmetic work on the installation, /stand/sysinstall now genuinely
useful after installation time (though still missing a man page - urk!).

Early support for APM (automated power management) and PCCARD
(formerly PCMCIA) features of laptops.  Many PCCARD devices
are supported, from modems to ethernet cards to SCSI adaptors.

Adaptec AIC7850 support has been added.

The Yellow Pages (NIS) support has had many optimizations made
and no longer has portions copyright under the GPL.

Various VM system enhancements and a few bugs fixed (gzip'd binaries
now work again, for example).

The system installation tool has been revamped with slightly different
menu behavior and a number of bugs have been fixed.  It's hoped that
this installation will be more intuitive for new users than previous
ones (feedback welcomed, of course).

The Intel EtherExpress Pro/100B PCI ethernet card is now supported.

The 3COM 3C590 and 3C595 ethernet cards are now supported.

The ARNET (now Digiboard) Sync 570i high-speed serial card is now supported.

The Linux emulation is now good enough to run the Linux version of
Netscape, with JAVA support (as well as a number of other Linux

The Matrox Meteor frame grabber card is better supported.

It is now possible to burn CDROMs using the Plasmon or HP 4080i
CDR drives (see `wormcontrol(1)').

The pipe code has been substantially sped up, as have some components
of the VM system.

A /dev/random device (and associated "pool of entropy") has been added
for applications which require more unpredicatable sequences of random
numbers for security.  See the random(4) man page for more info.

Early NFS v3 support (not enabled by default).

An early implementation of the Device Filesystem (devfs) is available
(see mount_devfs).  Device switch tables are now also dynamically built.

Early IPX routing support.

2. Technical overview

FreeBSD is a freely available, full source 4.4 BSD Lite based release
for Intel i386/i486/Pentium (or compatible) based PC's.  It is based
primarily on software from U.C. Berkeley's CSRG group, with some
enhancements from NetBSD, 386BSD, and the Free Software Foundation.

Since our release of FreeBSD 2.0 over a year ago, the performance,
feature set and stability of FreeBSD has improved dramatically.  The
largest change is a revamped VM system with a merged VM/file buffer
cache that not only increases performance but reduces FreeBSD's memory
footprint, making a 5MB configuration a more acceptable minimum.
Other enhancements include full NIS client and server support,
transaction TCP support, dial-on-demand PPP, an improved SCSI
subsystem, early ISDN support, support for FDDI and Fast Ethernet
(100Mbit) adapters, improved support for the Adaptec 2940 (WIDE and
narrow) and 3940 SCSI adaptors along with many hundreds of bug fixes.

We've taken the comments and suggestions of many of our users to
heart and have attempted to provide what we hope is a more sane and
easily understood installation process.  Your feedback on this
(constantly evolving) process is especially welcome!

In addition to the base distributions, FreeBSD offers a new ported
software collection with over 390 commonly sought-after programs.  The
list of ports ranges from http (WWW) servers, to games, languages,
editors and almost everything in between.  The entire ports collection
requires only 10MB of storage, all ports being expressed as "deltas"
to their original sources.  This makes it much easier for us to update
ports and greatly reduces the disk space demands made by the ports
collection.  To compile a port, you simply change to the directory of
the program you wish to install, type make and let the system do the
rest.  The full original distribution for each port you build is
retrieved dynamically off of CDROM or a local ftp site, so you need
only enough disk space to build the ports you want.  (Almost) every
port is also provided as a pre-compiled "package" which can be
installed with a simple command (pkg_add).  See also the new Packages
option in the Configuration menu for an especially convenient interface
to the package collection.

A number of additional documents which you may find helpful in the
process of installing and using FreeBSD may now also be found in the
/usr/share/doc directory.  You may view the manuals with any HTML
capable browser by saying:

  To read the handbook:
      <browser> file:/usr/share/doc/handbook/handbook.html

  To read the FAQ:
      <browser> file:/usr/share/doc/FAQ/freebsd-faq.html

You can also visit the master (and most frequently updated) copies at

The core of FreeBSD does not contain DES code which would inhibit its
being exported outside the United States.  There is an add-on package
to the core distribution, for use only in the United States, that
contains the programs that normally use DES.  The auxiliary packages
provided separately can be used by anyone.  A freely (from outside the
U.S.) exportable distribution of DES for our non-U.S. users also
exists at ftp://ftp.internat.freebsd.org/pub/FreeBSD.

If password security for FreeBSD is all you need and you have no
requirement for copying encrypted passwords from different hosts
(Suns, DEC machines, etc) into FreeBSD password entries, then
FreeBSD's MD5 based security may be all you require!  We feel that our
default security model is more than a match for DES, and without any
messy export issues to deal with.  If you're outside (or even inside)
the U.S., give it a try!  This snapshot also includes support for
mixed password files - either DES or MD5 passwords will be accepted,
making it easier to transition from one scheme to the other.

3. Supported Configurations

FreeBSD currently runs on a wide variety of ISA, VLB, EISA and PCI bus
based PC's, ranging from 386sx to Pentium class machines (though the
386sx is not recommended).  Support for generic IDE or ESDI drive
configurations, various SCSI controller, network and serial cards is
also provided.

What follows is a list of all disk controllers and ethernet cards
currently known to work with FreeBSD.  Other configurations may also
work, but we have simply not received any confirmation of this.

3.1. Disk Controllers

WD1003 (any generic MFM/RLL)
WD1007 (any generic IDE/ESDI)

Adaptec 1510 series ISA SCSI controllers (not for bootable devices)
Adaptec 152x series ISA SCSI controllers
Adaptec 154x series ISA SCSI controllers
Adaptec 174x series EISA SCSI controller in standard and enhanced mode.
Adaptec 274X/284X/2940/3940 (Narrow/Wide/Twin) series ISA/EISA/PCI SCSI
Adaptec AIC-6260 and AIC-6360 based boards, which includes
Adaptec AIC7850 on-board SCSI controllers.
the AHA-152x and SoundBlaster SCSI cards.

** Note: You cannot boot from the SoundBlaster cards as they have no
   on-board BIOS, such being necessary for mapping the boot device into the
   system BIOS I/O vectors.  They're perfectly usable for external tapes,
   CDROMs, etc, however.  The same goes for any other AIC-6x60 based card
   without a boot ROM.  Some systems DO have a boot ROM, which is generally
   indicated by some sort of message when the system is first powered up
   or reset, and in such cases you *will* also be able to boot from them.
   Check your system/board documentation for more details.

[Note that Buslogic was formerly known as "Bustec"]
Buslogic 545S & 545c
Buslogic 445S/445c VLB SCSI controller
Buslogic 742A, 747S, 747c EISA SCSI controller.
Buslogic 946c PCI SCSI controller
Buslogic 956c PCI SCSI controller

NCR 53C810 and 53C825 PCI SCSI controller.
NCR5380/NCR53400 ("ProAudio Spectrum") SCSI controller. 

DTC 3290 EISA SCSI controller in 1542 emulation mode.

UltraStor 14F, 24F and 34F SCSI controllers.

Seagate ST01/02 SCSI controllers.

Future Domain 8xx/950 series SCSI controllers.

WD7000 SCSI controller.

With all supported SCSI controllers, full support is provided for
SCSI-I & SCSI-II peripherals, including Disks, tape drives (including
DAT) and CD ROM drives.

The following CD-ROM type systems are supported at this time:
(cd)    SCSI interface (also includes ProAudio Spectrum and
        SoundBlaster SCSI)
(mcd)   Mitsumi proprietary interface (all models)
(matcd) Matsushita/Panasonic (Creative SoundBlaster) proprietary
        interface (562/563 models)
(scd)   Sony proprietary interface (all models)
(wcd)   ATAPI IDE interface (experimental and should be considered ALPHA

3.2. Ethernet cards

Allied-Telesis AT1700 and RE2000 cards
SMC Elite 16 WD8013 ethernet interface, and most other WD8003E,
WD8003EBT, WD8003W, WD8013W, WD8003S, WD8003SBT and WD8013EBT
based clones.  SMC Elite Ultra is also supported.

DEC EtherWORKS III NICs (DE203, DE204, and DE205)
DEC EtherWORKS II NICs (DE200, DE201, DE202, and DE422)
DEC DC21040, DC21041, or DC21140 based NICs (SMC Etherpower 8432T, DE245, etc)
Fujitsu MB86960A/MB86965A

Intel EtherExpress (not recommended due to driver instability)
Intel EtherExpress Pro/100B PCI Fast Ethernet

Isolan AT 4141-0 (16 bit)
Isolink 4110     (8 bit)

Novell NE1000, NE2000, and NE2100 ethernet interface.

3Com 3C501 cards

3Com 3C503 Etherlink II

3Com 3c505 Etherlink/+

3Com 3C507 Etherlink 16/TP

3Com 3C509, 3C579, 3C589 (PCMCIA), 3C590 & 3C595 (PCI) Etherlink III

Toshiba ethernet cards

PCMCIA ethernet cards from IBM and National Semiconductor are also

Note that NO token ring cards are supported at this time as we're
still waiting for someone to donate a driver for one of them.  Any

3.3. Misc

AST 4 port serial card using shared IRQ.

ARNET 8 port serial card using shared IRQ.
ARNET (now Digiboard) Sync 570/i high-speed serial.

BOCA ATIO66 6 port serial card using shared IRQ.

Cyclades Cyclom-y Serial Board.

STB 4 port card using shared IRQ.

SDL Communications Riscom/8 Serial Board.

Adlib, SoundBlaster, SoundBlaster Pro, ProAudioSpectrum, Gravis UltraSound
and Roland MPU-401 sound cards.

FreeBSD currently does NOT support IBM's microchannel (MCA) bus.

4. Obtaining FreeBSD

You may obtain FreeBSD in a variety of ways:

4.1. FTP/Mail

You can ftp FreeBSD and any or all of its optional packages from
`ftp.freebsd.org' - the official FreeBSD release site.

For other locations that mirror the FreeBSD software see the file
MIRROR.SITES.  Please ftp the distribution from the site closest (in
networking terms) to you.  Additional mirror sites are always welcome!
Contact admin at freebsd.org for more details if you'd like to become an
official mirror site.

If you do not have access to the internet and electronic mail is your
only recourse, then you may still fetch the files by sending mail to
`ftpmail at decwrl.dec.com' - putting the keyword "help" in your message
to get more information on how to fetch files using this mechanism.
Please do note, however, that this will end up sending many *tens of
megabytes* through the mail and should only be employed as an absolute
LAST resort!

4.2. CDROM

FreeBSD 2.1-RELEASE and these 2.2 SNAPSHOT CDs may be ordered on CDROM from:

        Walnut Creek CDROM
        4041 Pike Lane, Suite D
        Concord CA  94520
        1-800-786-9907, +1-510-674-0783, +1-510-674-0821 (fax)

Or via the internet from orders at cdrom.com or http://www.cdrom.com.
Their current catalog can be obtained via ftp as:

Cost per -RELEASE CD is $39.95 or $24.95 with a FreeBSD subscription.
FreeBSD 2.2-SNAP CDs are $29.95 or $14.95 with a FreeBSD-SNAP subscription
(-RELEASE and -SNAP subscriptions are entirely seperate).  With a
subscription, you will automatically receive updates as they are released.
Your credit card will be billed when each disk is shipped and you may cancel
your subscription at any time without further obligation.

Walnut Creek CDROM also sells a full line of FreeBSD related
merchandise such as T-shirts ($14.95, available in "child", Large and
XL sizes), coffee mugs ($9.95), tattoos ($0.25 each) and posters

Shipping (per order not per disc) is $5 in the US, Canada or Mexico
and $9.00 overseas.  They accept Visa, Mastercard, Discover, American
Express or checks in U.S. Dollars and ship COD within the United
States.  California residents please add 8.25% sales tax.

Should you be dissatisfied for any reason, the CD comes with an
unconditional return policy.

Reporting problems, making suggestions, submitting code

Your suggestions, bug reports and contributions of code are always
valued - please do not hesitate to report any problems you may find
(preferably with a fix attached, if you can!).

The preferred method to submit bug reports from a machine with
internet mail connectivity is to use the send-pr command.  Bug reports
will be dutifully filed by our faithful bugfiler program and you can
be sure that we'll do our best to respond to all reported bugs as soon
as possible.  Bugs filed in this way are also visible on our WEB site
in the support section and are therefore valuable both as bug reports
and as "signposts" for other users concerning potential problems to
watch out for.

If, for some reason, you are unable to use the send-pr command to
submit a bug report, you can try to send it to:

                bugs at FreeBSD.org

Otherwise, for any questions or suggestions, please send mail to:

                questions at FreeBSD.org

Additionally, being a volunteer effort, we are always happy to have
extra hands willing to help - there are already far more desired
enhancements than we'll ever be able to manage by ourselves!  To
contact us on technical matters, or with offers of help, please send
mail to:

                hackers at FreeBSD.org

Please note that these mailing lists can experience *significant*
amounts of traffic and if you have slow or expensive mail access and
are only interested in keeping up with significant FreeBSD events, you
may find it preferable to subscribe instead to:

                announce at FreeBSD.org

All but the freebsd-bugs groups can be freely joined by anyone wishing
to do so.  Send mail to MajorDomo at FreeBSD.org and include the keyword
`help' on a line by itself somewhere in the body of the message.  This
will give you more information on joining the various lists, accessing
archives, etc.  There are a number of mailing lists targeted at
special interest groups not mentioned here, so send mail to majordomo
and ask about them!

6. Acknowledgements

FreeBSD represents the cumulative work of many dozens, if not
hundreds, of individuals from around the world who have worked very
hard to bring you this release.  It would be very difficult, if not
impossible, to enumerate everyone who's contributed to FreeBSD, but
nonetheless we shall try (in alphabetical order, of course). If you've
contributed something substantive to us and your name is not mentioned
here, please be assured that its omission is entirely accidental.
Please contact hackers at FreeBSD.org for any desired updates to the
lists that follow:

The Computer Systems Research Group (CSRG), U.C. Berkeley.

Bill Jolitz, for his initial work with 386BSD.

The FreeBSD Core Team
(in alphabetical order by last name):

        Satoshi Asami <asami at FreeBSD.org>
        Andrey A. Chernov <ache at FreeBSD.org>
        John Dyson <dyson at FreeBSD.org>
        Bruce Evans <bde at FreeBSD.org>
        Justin Gibbs <gibbs at FreeBSD.org>
        David Greenman <davidg at FreeBSD.org>
        Jordan K. Hubbard <jkh at FreeBSD.org>
        Poul-Henning Kamp <phk at FreeBSD.org>
        Rich Murphey <rich at FreeBSD.org>
        Gary Palmer <gpalmer at FreeBSD.org>
        Søren Schmidt <sos at FreeBSD.org>
        Peter Wemm <peter at FreeBSD.org>
        Garrett A. Wollman <wollman at FreeBSD.org>
        Jörg Wunsch <joerg at FreeBSD.org>

The FreeBSD Development Team, excluding core team members
(in alphabetical order by last name):

        Torsten Blum <torstenb at FreeBSD.org>
        Gary Clark II <gclarkii at FreeBSD.org>
        Adam David <adam at FreeBSD.org>
        Peter Dufault <dufault at FreeBSD.org>
        Frank Durda IV <uhclem at FreeBSD.org>
        Julian Elischer <julian at FreeBSD.org>
        Sean Eric Fagan <sef at FreeBSD.org>
        Stefan Esser <se at FreeBSD.org>
        Bill Fenner <fenner at FreeBSD.org>
        John Fieber <jfieber at FreeBSD.org>
        Lars Fredriksen <lars at freeBSD.org>
        Thomas Gellekum <tg at FreeBSD.org>
        Thomas Graichen <graichen at FreeBSD.org>
        Rod Grimes <rgrimes at FreeBSD.org>
        Jeffrey Hsu <hsu at FreeBSD.org>
        Ugen J.S. Antsilevich <ugen at FreeBSD.org>
        Gary Jennejohn <gj at FreeBSD.org>
        L Jonas Olsson <ljo at FreeBSD.org>
        Eric L. Hernes <erich at FreeBSD.org>
        Scott Mace <smace at FreeBSD.org>
        Atsushi Murai <amurai at FreeBSD.org>
        Mark Murray <markm at FreeBSD.org>
        Andras Olah <olah at FreeBSD.org>
        Bill Paul <wpaul at FreeBSD.org>
        Joshua Peck Macdonald <jmacd at FreeBSD.org>
        John Polstra <jdp at FreeBSD.org>
        Mike Pritchard <mpp at FreeBSD.org>
        Doug Rabson <dfr at FreeBSD.org>
        Geoff Rehmet <csgr at FreeBSD.org>
        Martin Renters <martin at FreeBSD.org>
        Paul Richards <paul at FreeBSD.org>
        Ollivier Robert <roberto at FreeBSD.org>
        Dima Ruban <dima at FreeBSD.org>
        Wolfram Schneider <wosch at FreeBSD.org>
        Andreas Schulz <ats at FreeBSD.org>
        Karl Strickland <karl at FreeBSD.org>
        Paul Traina <pst at FreeBSD.org>
        Guido van Rooij <guido at FreeBSD.org>
        Steven Wallace <swallace at FreeBSD.org>
        Nate Williams <nate at FreeBSD.org>
        Jean-Marc Zucconi <jmz at FreeBSD.org>

Additional FreeBSD helpers and beta testers:

        Coranth Gryphon            Dave Rivers 
        John Hay                   Kaleb S. Keithley
        Michael Smith              Terry Lambert
        David Dawes

Special mention to:

        Walnut Creek CDROM, without whose help (and continuing support)
        this release would never have been possible.

        Dermot McDonnell for his donation of a Toshiba XM3401B CDROM

        Chuck Robey for his donation of a floppy tape streamer for

        Larry Altneu and Wilko Bulte for providing us with Wangtek
        and Archive QIC-02 tape drives for testing and driver hacking.

	CalWeb Internet Services for the loan of a P6/200 machine for
	speedy package building.

        Everyone at Montana State University for their initial support.

        And to the many thousands of FreeBSD users and testers all over the
        world, without whom this release simply would not have been possible.

We sincerely hope you enjoy this release of FreeBSD!

                        The FreeBSD Core Team

$Id: relnotes.hlp,v 1.14 1996/10/07 04:43:01 jkh Exp $

More information about the freebsd-announce mailing list