amd64/170487: [boot] Thinkpad X61s cannot boot 9.1-BETA1

[Per olof Ljungmark]

The following reply was made to PR amd64/170487; it has been noted by GNATS.

From: Per olof Ljungmark <peo at intersonic.se>
To: bug-followup at FreeBSD.org, peo at intersonic.se
Cc:  
Subject: Re: amd64/170487: [boot] Thinkpad X61s cannot boot 9.1-BETA1
Date: Mon, 20 Aug 2012 15:52:46 +0200

 More info:
 
 Thinkpad X61s 7669-29G, latest BIOS
 
 Disk:
 
 Kingston SSDNow SV200S37A/128G, firmware E111008a
 
 With this drive, it will not boot BETA1, 9.0-RELEASE is fine. Checked 
 with a mechanical driva and then it boots fine. Will try to upgrade 
 firmware on SSD drive to check if it remedies.
 
 Selected dmesg parts:
 
 ----
 
 atapci0: <Intel ICH8M UDMA100 controller> port 
 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18e0-0x18ef at device 31.1 on pci0
 ata0: <ATA channel> at channel 0 on atapci0
 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 59
 ahci0: <Intel ICH8M AHCI SATA controller> port 
 0x1c30-0x1c37,0x1c24-0x1c27,0x1c28-0x1c2f,0x1c20-0x1c23,0x1c00-0x1c1f 
 mem 0xfe226000-0xfe2267ff irq 16 at device 31.2 on pci0
 ahci0: attempting to allocate 1 MSI vectors (4 supported)
 msi: routing MSI IRQ 258 to local APIC 0 vector 60
 ahci0: using IRQ 258 for MSI
 ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier not supported
 ahci0: Caps: 64bit NCQ SNTF ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC 3ports
 ahci0: Caps2:
 ahcich0: <AHCI channel> at channel 0 on ahci0
 ahcich0: Caps:
 ahcich1: not probed (disabled)
 ahcich2: <AHCI channel> at channel 2 on ahci0
 ahcich2: Caps:
 ----
 
 ata0: reset tp1 mask=03 ostat0=7f ostat1=7f
 ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
 ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
 ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
 ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
 ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
 ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
 ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
 ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
 ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
 ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
 ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
 ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
 ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
 ata0: reset tp2 stat0=ff stat1=ff devices=0x0
 ahcich0: AHCI reset...
 ahcich0: SATA connect time=3200us status=00000123
 ahcich0: AHCI reset: device found
 ahcich0: AHCI reset: device ready after 0ms
 ahcich2: AHCI reset...
 ahcich2: SATA offline status=00000004
 ahcich2: AHCI reset: device not found
 battery0: battery initialization start
 acpi_acad0: acline initialization start
 battery0: battery initialization done, tried 1 times
 acpi_acad0: On Line
 acpi_acad0: acline initialization done, tried 1 times
 ---- Hangs here ----