amd64/130368: Switching from xorg to console locks up computer
Jack
xxjack12xx at gmail.com
Sat Jan 10 23:10:07 PST 2009
>Number: 130368
>Category: amd64
>Synopsis: Switching from xorg to console locks up computer
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-amd64
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Jan 11 07:10:05 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: Jack
>Release: 7.1-RELEASE
>Organization:
>Environment:
FreeBSD jack.musirc.com 7.1-RELEASE FreeBSD 7.1-RELEASE #0: Thu Jan 1 08:58:24 UTC 2009 root at driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
>Description:
Switching from xorg to the console causes the system to freeze.
Attached is the dmesg output
Motherboard is ECS A780GM-A
>How-To-Repeat:
start xorg and logout or ctrl+alt+backspace and the system hangs and does not respond to any keyboard actions.
>Fix:
Patch attached with submission follows:
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80c4be40
ad4: 476940MB <Seagate ST3500641AS 3.AAE> at ata2-master SATA300
ad6: 381554MB <Seagate ST3400620AS 3.AAC> at ata3-master SATA300
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/md0
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...502 145 69 67 65 2 2 2 0 0 0 done
All buffers synced.
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RELEASE #0: Thu Jan 1 08:58:24 UTC 2009
root at driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80cc0000.
Preloaded elf obj module "/boot/kernel/sound.ko" at 0xffffffff80cc01d0.
Preloaded elf obj module "/boot/kernel/snd_ich.ko" at 0xffffffff80cc0838.
Preloaded elf obj module "/boot/kernel/accf_data.ko" at 0xffffffff80cc0e20.
Preloaded elf obj module "/boot/kernel/accf_http.ko" at 0xffffffff80cc12d0.
Calibrating clock(s) ... i8254 clock: 1193218 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3200136328 Hz
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ (3200.14-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40f33 Stepping = 3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
Cores per package: 2
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
usable memory = 8541208576 (8145 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000dc3000 - 0x00000000dfeaffff, 3742289920 bytes (913645 pages)
0x0000000100000000 - 0x000000020e16bfff, 4531339264 bytes (1106284 pages)
avail memory = 8257953792 (7875 MB)
ACPI APIC Table: <110608 APIC1133>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ULE: setup cpu group 1
ULE: setup cpu 1
ULE: adding cpu 1 to group 1: cpus 1 mask 0x2
ACPI: RSDP @ 0x0xf9e40/0x0014 (v 0 ACPIAM)
ACPI: RSDT @ 0x0xdfeb0000/0x0038 (v 1 110608 RSDT1133 0x20081106 MSFT 0x00000097)
ACPI: FACP @ 0x0xdfeb0200/0x0084 (v 2 110608 FACP1133 0x20081106 MSFT 0x00000097)
ACPI: DSDT @ 0x0xdfeb0440/0x4D44 (v 1 1AAAA 1AAAA000 0x00000000 INTL 0x20051117)
ACPI: FACS @ 0x0xdfebe000/0x0040
ACPI: APIC @ 0x0xdfeb0390/0x006C (v 1 110608 APIC1133 0x20081106 MSFT 0x00000097)
ACPI: MCFG @ 0x0xdfeb0400/0x003C (v 1 110608 OEMMCFG 0x20081106 MSFT 0x00000097)
ACPI: OEMB @ 0x0xdfebe040/0x0071 (v 1 110608 OEMB1133 0x20081106 MSFT 0x00000097)
ACPI: HPET @ 0x0xdfeb5190/0x0038 (v 1 110608 OEMHPET 0x20081106 MSFT 0x00000097)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Jan 1 2009 08:57:24)
acpi0: <110608 RSDT1133> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.RS78.NB2_ -> bus 0 dev 0 func 0
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SACS -> bus 0 dev 17 func 0
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fec10000, 20 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, dfe00000 (3) failed
ACPI HPET table warning: Sequence is non-zero (2)
ACPI timer: 0/3 0/5 0/3 0/3 0/3 0/3 1/2 0/3 0/3 0/3 -> 1
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 4 7 10 11 12 14 15
Validation 0 7 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 4 N 0 4 7 10 11 12 14 15
Validation 0 4 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 4 7 10 11 12 14 15
Validation 0 10 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 4 7 10 11 12 14 15
Validation 0 10 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 4 7 10 11 12 14 15
Validation 0 11 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1022, dev=0x9600, revid=0x00
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x9602, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x9606, revid=0x00
domain=0, bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 18
found-> vendor=0x1002, dev=0x4391, revid=0x00
domain=0, bus=0, slot=17, func=0
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xb000, size 3, enabled
map[14]: type I/O Port, range 32, base 0xa000, size 2, enabled
map[18]: type I/O Port, range 32, base 0x9000, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x8000, size 2, enabled
map[20]: type I/O Port, range 32, base 0x7000, size 4, enabled
map[24]: type Memory, range 32, base 0xfe7ff800, size 10, enabled
pcib0: matched entry for 0.17.INTA
pcib0: slot 17 INTA hardwired to IRQ 22
found-> vendor=0x1002, dev=0x4397, revid=0x00
domain=0, bus=0, slot=18, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0102, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
map[10]: type Memory, range 32, base 0xfe7fe000, size 12, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x4398, revid=0x00
domain=0, bus=0, slot=18, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
map[10]: type Memory, range 32, base 0xfe7fd000, size 12, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x4396, revid=0x00
domain=0, bus=0, slot=18, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=4
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe7ff000, size 8, enabled
pcib0: matched entry for 0.18.INTB
pcib0: slot 18 INTB hardwired to IRQ 17
found-> vendor=0x1002, dev=0x4397, revid=0x00
domain=0, bus=0, slot=19, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[10]: type Memory, range 32, base 0xfe7fc000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 18
found-> vendor=0x1002, dev=0x4398, revid=0x00
domain=0, bus=0, slot=19, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[10]: type Memory, range 32, base 0xfe7f7000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 18
found-> vendor=0x1002, dev=0x4396, revid=0x00
domain=0, bus=0, slot=19, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe7f6800, size 8, enabled
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4385, revid=0x3a
domain=0, bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0403, statreg=0xd230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x439c, revid=0x00
domain=0, bus=0, slot=20, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
MSI supports 2 messages
map[20]: type I/O Port, range 32, base 0xff00, size 4, enabled
found-> vendor=0x1002, dev=0x4383, revid=0x00
domain=0, bus=0, slot=20, func=2
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 64, base 0xfe7f0000, size 14, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x439d, revid=0x00
domain=0, bus=0, slot=20, func=3
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4384, revid=0x00
domain=0, bus=0, slot=20, func=4
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4399, revid=0x00
domain=0, bus=0, slot=20, func=5
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0102, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[10]: type Memory, range 32, base 0xfe7f5000, size 12, enabled
pcib0: matched entry for 0.20.INTC
pcib0: slot 20 INTC hardwired to IRQ 18
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xcfff
pcib1: memory decode 0xfe800000-0xfe9fffff
pcib1: prefetched decode 0xfa000000-0xfbffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x9610, revid=0x00
domain=0, bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Prefetchable Memory, range 32, base 0xfa000000, size 25, enabled
pcib1: requested memory range 0xfa000000-0xfbffffff: good
map[14]: type I/O Port, range 32, base 0xc000, size 8, enabled
pcib1: requested I/O range 0xc000-0xc0ff: in range
map[18]: type Memory, range 32, base 0xfe9f0000, size 16, enabled
pcib1: requested memory range 0xfe9f0000-0xfe9fffff: good
map[24]: type Memory, range 32, base 0xfe800000, size 20, enabled
pcib1: requested memory range 0xfe800000-0xfe8fffff: good
pcib1: matched entry for 1.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 18
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xfa000000-0xfbffffff,0xfe9f0000-0xfe9fffff,0xfe800000-0xfe8fffff irq 18 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xfea00000-0xfeafffff
pcib2: prefetched decode 0xfdf00000-0xfdffffff
pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.PCE6 - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x10ec, dev=0x8168, revid=0x02
domain=0, bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 2 messages in map 0x20
map[10]: type I/O Port, range 32, base 0xd800, size 8, enabled
pcib2: requested I/O range 0xd800-0xd8ff: in range
map[18]: type Memory, range 64, base 0xfeaff000, size 12, enabled
pcib2: requested memory range 0xfeaff000-0xfeafffff: good
map[20]: type Prefetchable Memory, range 64, base 0xfdff0000, size 16, enabled
pcib2: requested memory range 0xfdff0000-0xfdffffff: good
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 18
pcib2: slot 0 INTA is routed to irq 18
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff,0xfdff0000-0xfdffffff irq 18 at device 0.0 on pci2
re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfeaff000
re0: MSI count : 1
re0: Chip rev. 0x3c000000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:21:97:0f:0c:9f
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 49
re0: [MPSAFE]
re0: [FILTER]
atapci0: <ATI (ID=43911002) AHCI controller> port 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfe7ff800-0xfe7ffbff irq 22 at device 17.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x7000
atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe7ff800
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 50
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: SATA connect time=0ms
ata2: SIGNATURE: 00000101
ata2: ahci_reset devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect time=0ms
ata3: SIGNATURE: 00000101
ata3: ahci_reset devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: SATA connect status=00000000
ata4: ahci_reset devices=0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: SATA connect status=00000000
ata5: ahci_reset devices=0x0
ata5: [MPSAFE]
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at device 18.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe7fe000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 51
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe7fd000-0xfe7fdfff irq 16 at device 18.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe7fd000
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff000-0xfe7ff0ff irq 17 at device 18.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe7ff000
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 52
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
ehci0: Dropped interrupts workaround enabled
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 6 ports with 6 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at device 19.0 on pci0
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe7fc000
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: SMM does not respond, resetting
usb3: <OHCI (generic) USB controller> on ohci2
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 3 ports with 3 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xfe7f7000-0xfe7f7fff irq 18 at device 19.1 on pci0
ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe7f7000
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: SMM does not respond, resetting
usb4: <OHCI (generic) USB controller> on ohci3
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 3 ports with 3 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe7f6800-0xfe7f68ff irq 19 at device 19.2 on pci0
ehci1: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe7f6800
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
ehci1: Dropped interrupts workaround enabled
usb5: EHCI version 1.0
usb5: companion controllers, 3 ports each: usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci1
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 6 ports with 6 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP700 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=7f ostat1=7f
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata0: reset tp2 stat0=ff stat1=ff devices=0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54
ata0: [MPSAFE]
ata0: [ITHREAD]
pci0: <multimedia> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xe000-0xefff
pcib3: memory decode 0xfeb00000-0xfebfffff
pcib3: no prefetched decode
pcib3: Subtractively decoded bridge.
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x8086, dev=0x1229, revid=0x0c
domain=0, bus=3, slot=7, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfebff000, size 12, enabled
pcib3: requested memory range 0xfebff000-0xfebfffff: good
map[14]: type I/O Port, range 32, base 0xe800, size 6, enabled
pcib3: requested I/O range 0xe800-0xe83f: in range
map[18]: type Memory, range 32, base 0xfebc0000, size 17, enabled
pcib3: requested memory range 0xfebc0000-0xfebdffff: good
pcib3: matched entry for 3.7.INTA
pcib3: slot 7 INTA hardwired to IRQ 22
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xe800-0xe83f mem 0xfebff000-0xfebfffff,0xfebc0000-0xfebdffff irq 22 at device 7.0 on pci3
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfebff000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 0040 000c
fxp0: Dynamic Standby mode is disabled
miibus1: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:02:b3:33:cc:c1
fxp0: [MPSAFE]
fxp0: [ITHREAD]
ohci4: <OHCI (generic) USB controller> mem 0xfe7f5000-0xfe7f5fff irq 18 at device 20.5 on pci0
ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe7f5000
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb6: OHCI version 1.0, legacy support
usb6: SMM does not respond, resetting
usb6: <OHCI (generic) USB controller> on ohci4
usb6: USB revision 1.0
uhub6: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: failed to reset the aux device.
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 56
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x810
powernow0: <PowerNow! K8> on cpu0
powernow0: STATUS: 0x3104120604180218
powernow0: STATUS: maxfid: 0x18
powernow0: STATUS: maxvid: 0x04
device_attach: powernow0 attach returned 6
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
powernow1: STATUS: 0x3104120604180218
powernow1: STATUS: maxfid: 0x18
powernow1: STATUS: maxvid: 0x04
device_attach: powernow1 attach returned 6
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ahc_isa_probe 0: ioport 0xc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xd1000-0xd27ff on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
ums0: <vendor 0x0461 USB Mouse, class 0/0, rev 1.10/1.10, addr 2> on uhub0
ums0: 3 buttons and Z dir.
Device configuration finished.
Reducing kern.maxvnodes 235635 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100004269 hz
Timecounter "TSC" frequency 3200136328 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 476940MB <Seagate ST3500641AS 3.AAE> at ata2-master SATA300
ad4: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
ad4: Silicon Image check3 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad6: 381554MB <Seagate ST3400620AS 3.AAC> at ata3-master SATA300
ad6: 781422768 sectors [775221C/16H/63S] 16 sectors/interrupt 1 depth queue
ad6: Silicon Image check1 failed
ad6: Adaptec check1 failed
ad6: LSI (v3) check1 failed
ad6: LSI (v2) check1 failed
ad6: FreeBSD check1 failed
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 6 to local APIC 0
ioapic0: Assigning ISA IRQ 9 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning PCI IRQ 16 to local APIC 1
ioapic0: Assigning PCI IRQ 17 to local APIC 0
ioapic0: Assigning PCI IRQ 18 to local APIC 1
ioapic0: Assigning PCI IRQ 19 to local APIC 0
ioapic0: Assigning PCI IRQ 22 to local APIC 1
GEOM: new disk ad4
GEOM: new disk ad6
Trying to mount root from ufs:/dev/ad4s1a
start_init: trying /sbin/init
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
Linux ELF exec handler installed
linprocfs registered
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-amd64
mailing list