ata(4) problem (unable to burn CDs)
Mario Pavlov
freebsd at abv.bg
Sat Jan 5 00:59:06 PST 2008
Hi guys,
I'm experiencing problems with my DVD burner. I can't burn CDs.
When I start k3b and load some data and start the burning it just never starts writing and I'm getting the fallowing errors in the messages log
************************************************************************************************************************
Jan 5 09:59:15 e-soul kernel: acd0: FAILURE - READ_DVD_STRUCTURE ILLEGAL REQUEST asc=0x30 ascq=0x02
Jan 5 09:59:15 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
Jan 5 09:59:17 e-soul last message repeated 3 times
Jan 5 09:59:19 e-soul kernel: acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
Jan 5 09:59:19 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
Jan 5 09:59:19 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
Jan 5 10:02:45 e-soul kernel: acd0: FAILURE - WRITE_BIG timed out
Jan 5 10:06:17 e-soul kernel: acd0: FAILURE - WRITE_BIG timed out
Jan 5 10:06:25 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
Jan 5 10:06:25 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
************************************************************************************************************************
and this is the k3b debug output after I hit cancel
************************************************************************************************************************
System
-----------------------
K3b Version: 1.0.4
KDE Version: 3.5.8
QT Version: 3.3.8
Kernel: 7.0-PRERELEASE
Devices
-----------------------
HL-DT-ST DVDRAM GSA-H62N CL00 (/dev/cd0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump]
Used versions
-----------------------
cdrecord: 2.1
cdrecord
-----------------------
/usr/local/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/local/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/local/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '4,0,0'
scsibus: 4 target: 0 lun: 0
SCSI buffer size: 64512
/usr/local/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
/usr/local/bin/cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
/usr/local/bin/cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Cdrecord-Clone 2.01 (amd64-unknown-freebsd7.0) Copyright (C) 1995-2004 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 0
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-H62N '
Revision : 'CL00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0012
Profile: 0x0011
Profile: 0x0015
Profile: 0x0016
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009 (current)
Profile: 0x000A
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 5634 kB/s 32x CD 4x DVD
FIFO size : 4194304 = 4096 KB
/usr/local/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/local/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/local/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/local/bin/cdrecord: DMA speed too slow (OK for 26x). Cannot write at speed 48x.
Track 01: data 671 MB
Total size: 770 MB (76:22.93) = 343720 sectors
Lout start: 771 MB (76:24/70) = 343720 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359845 (79:59/70)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 16125
Starting to write CD/DVD at speed 48 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
/usr/local/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
/usr/local/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: cmd timeout after 206.695 (200) s
CDB: 2A 00 FF FF FF 6A 00 00 1F 00
cmd finished after 206.695s timeout 200s
/usr/local/bin/cdrecord: Input/output error. read buffer cap: scsi sendcmd: retryable error
CDB: 5C 00 00 00 00 00 00 00 0C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 80 29 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x6 Unit Attention, Segment 0
Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 5.095s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
Starting new track at sector: 0
Track 01: 0 of 671 MB written.
/usr/local/bin/cdrecord: faio_wait_on_buffer for writer timed out.
/usr/local/bin/cdrecord: Caught interrupt.
Track 01: data 671 MB
Total size: 770 MB (76:22.93) = 343720 sectors
Lout start: 771 MB (76:24/70) = 343720 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359845 (79:59/70)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 16125
Writing time: 426.405s
/usr/local/bin/cdrecord: fifo had 64 puts and 1 gets.
/usr/local/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/local/bin/cdrecord -v gracetime=2 dev=4,0,0 speed=48 -dao driveropts=burnfree -eject -data -tsize=343720s -
************************************************************************************************************************
cdrecord is complaining about permissions but I have this in /etc/devfs.conf
************************************************************************************************************************
perm cdrom 0666
own cdrom root:operator
link cd0 cdwriter
perm cdwriter 0666
own cdwriter root:operator
perm pass0 0666
own pass0 root:operator
perm xpt0 0666
own xpt0 root:operator
************************************************************************************************************************
and also
************************************************************************************************************************
$ ls -l acd0 cd0 pass0 xpt0
crw-rw-rw- 1 root operator 0, 101 Jan 4 20:59 acd0
crw-rw-rw- 1 root operator 0, 104 Jan 4 20:59 cd0
crw-rw-rw- 1 root operator 0, 100 Jan 4 20:59 pass0
crw-rw-rw- 1 root operator 0, 81 Jan 4 20:59 xpt0
************************************************************************************************************************
I have atapicam compiled in the kernel
I've found similar problem reported in the freebsd-stable mailing list
here is the thread http://lists.freebsd.org/pipermail/freebsd-stable/2007-May/035257.html
I'm running the latest code from RELENG_7 for amd64
************************************************************************************************************************
$ uname -a
FreeBSD e-soul.org 7.0-PRERELEASE FreeBSD 7.0-PRERELEASE #6: Fri Jan 4 12:27:16 EET 2008 root at e-soul.org:/usr/obj/usr/src/sys/Ss amd64
************************************************************************************************************************
************************************************************************************************************************
$ dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-PRERELEASE #6: Fri Jan 4 12:27:16 EET 2008
root at e-soul.org:/usr/obj/usr/src/sys/Ss
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz (2206.71-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 4285259776 (4086 MB)
avail memory = 4084604928 (3895 MB)
ACPI APIC Table: <MSTEST OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <MSTEST OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - EB, should be E6 [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr b280b2806000b28
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr b280b2806000b28
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x8c00-0x8c7f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1
uhci0: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 17 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: waiting for BIOS to give up control
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pcm0: <Intel 82801H High Definition Audio Controller> mem 0xfebf8000-0xfebfbfff irq 22 at device 27.0 on pci0
pcm0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xa800-0xa8ff mem 0xfe9ff000-0xfe9fffff irq 19 at device 0.0 on pci3
re0: Using 2 MSI messages
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:1d:60:2a:4f:56
re0: [FILTER]
re0: [FILTER]
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib4
atapci0: <JMicron JMB363 SATA300 controller> port 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x940f mem 0xfe8fe000-0xfe8fffff irq 16 at device 0.0 on pci2
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
uhci2: <UHCI (generic) USB controller> port 0xd480-0xd49f irq 23 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 19 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 18 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfebff800-0xfebffbff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
dc0: <Davicom DM9102A 10/100BaseTX> port 0xb800-0xb8ff mem 0xfeaffc00-0xfeaffcff irq 22 at device 1.0 on pci5
miibus1: <MII bus> on dc0
amphy0: <DM9102 10/100 media interface> PHY 1 on miibus1
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:08:a1:27:88:1c
dc0: [ITHREAD]
rl0: <RealTek 8139 10/100BaseTX> port 0xb400-0xb4ff mem 0xfeaff800-0xfeaff8ff irq 23 at device 2.0 on pci5
miibus2: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus2
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:19:e0:0e:a7:fa
rl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH8 SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f,0xe080-0xe08f irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata5: <ATA channel 0> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci1
ata6: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH8 SATA300 controller> port 0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f,0xc800-0xc80f irq 19 at device 31.5 on pci0
atapci2: [ITHREAD]
ata7: <ATA channel 0> on atapci2
ata7: [ITHREAD]
ata8: <ATA channel 1> on atapci2
ata8: [ITHREAD]
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 2> on uhub3
kbd2 at ukbd0
uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 2> on uhub3
Timecounters tick every 1.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging unlimited
ad10: 476940MB <Seagate ST3500320AS SD15> at ata5-master SATA150
acd0: DVDR <HL-DT-ST DVDRAM GSA-H62N/CL00> at ata6-master SATA150
pcm0: <HDA Codec: Analog Devices AD1988>
pcm0: <HDA Driver Revision: 20071129_0050>
SMP: AP CPU #1 Launched!
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
cd0 at ata4 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-H62N CL00> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: cd present [325318 x 2048 byte records]
GEOM_LABEL: Label for provider acd0 is iso9660/BROODWAR.
Trying to mount root from ufs:/dev/ad10s2a
re0: link state changed to UP
dc0: link state changed to DOWN
dc0: link state changed to UP
acd0: FAILURE - READ_DVD_STRUCTURE ILLEGAL REQUEST asc=0x30 ascq=0x02
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
acd0: FAILURE - WRITE_BIG timed out
acd0: FAILURE - WRITE_BIG timed out
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
acd0: FAILURE - READ_DVD_STRUCTURE ILLEGAL REQUEST asc=0x30 ascq=0x02
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
acd0: FAILURE - WRITE_BIG timed out
acd0: FAILURE - WRITE_BIG timed out
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
************************************************************************************************************************
this was all working on my previous machine running 7.0 BETA-3 for i386
I've tested this DVD burner on windows and it's working
anyone having the same problem ?
Regards
MGP
More information about the freebsd-amd64
mailing list