Dell PE2850 freeze on boot with PXE and FreeBSD 7.0 amd64

Stefan Lambrev stefan.lambrev at sun-fish.com
Tue Jul 3 12:16:36 UTC 2007


Hello,

Sorry for cross-posting, but I'm not sure which is the proper mail list 
for this.

I'm trying to boot latest FreeBSD 7 amd64 snapshot on Dell PE2850 (+2 
year old server),
but it panic (and freeze) every time on afd.
afd in this case should be virtual floppy provided by DRAC (Dell Remote 
Access Controller)

FreeBSD 7 - i386 boot without a problems, I'll try few other snapshots 
(6.2-stable amd64) to be sure that the problem is only in 7-current amd64

Here is result from verbose boot:


GDB: debug ports: dcons
GDB: current port: dcons
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009e800
SMAP type=02 base=000000000009e800 len=0000000000001800
SMAP type=01 base=0000000000100000 len=00000000b36a0000
SMAP type=02 base=00000000b37a0000 len=000000000c800000
SMAP type=01 base=00000000bffa0000 len=0000000000020000
SMAP type=03 base=00000000bffc0000 len=000000000000fc00
SMAP type=02 base=00000000bffcfc00 len=000000000002f400
SMAP type=02 base=00000000e0000000 len=000000001ec90000
SMAP type=02 base=00000000fed00000 len=0000000000000400
SMAP type=02 base=00000000fee00000 len=0000000000010000
SMAP type=02 base=00000000ffb00000 len=0000000000500000
SMAP type=01 base=0000000100000000 len=0000000140000000
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
       The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT-200706 #0: Thu Jun  7 21:38:42 UTC 2007
   root at stiles.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Using 32 colors for the VM-PQ tuning (0, 0)
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80f98000.
Preloaded mfs_root "/boot/mfsroot" at 0xffffffff80f98208.
Calibrating clock(s) ... i8254 clock: 1193174 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3192223984 Hz
CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3192.22-MHz K8-class CPU)
 Origin = "GenuineIntel"  Id = 0xf43  Stepping = 3
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM 

,PBE>
 Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,CX16,xTPR>
 AMD Features=0x20100800<SYSCALL,NX,LM>
 Logical CPUs per core: 2
usable memory = 8363180032 (7975 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x000000000109a000 - 0x00000000b379ffff, 2993709056 bytes (730886 pages)
0x00000000bffa0000 - 0x00000000bffbffff, 131072 bytes (32 pages)
0x0000000100000000 - 0x000000022f177fff, 5085036544 bytes (1241464 pages)
avail memory  = 8068014080 (7694 MB)
ACPI APIC Table: <DELL   PE BKC  >
INTR: Adding local APIC 6 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  1
cpu2 (AP): APIC ID:  6
cpu3 (AP): APIC ID:  7
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 3
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 4
ACPI: RSDP @ 0x0xfd650/0x0014 (v  0 DELL  )
ACPI: RSDT @ 0x0xfd664/0x0038 (v  1 DELL   PE BKC   0x00000001 MSFT 
0x0100000A)
ACPI: FACP @ 0x0xfd6b0/0x0074 (v  1 DELL   PE BKC   0x00000001 MSFT 
0x0100000A)
ACPI: DSDT @ 0x0xbffc0000/0x388D (v  1 DELL   PE BKC   0x00000001 MSFT 
0x0100000E)
ACPI: FACS @ 0x0xbffcfc00/0x0040
ACPI: APIC @ 0x0xfd724/0x00A8 (v  1 DELL   PE BKC   0x00000001 MSFT 
0x0100000A)
ACPI: SPCR @ 0x0xfd7cc/0x0050 (v  1 DELL   PE BKC   0x00000001 MSFT 
0x0100000A)
ACPI: HPET @ 0x0xfd81c/0x0038 (v  1 DELL   PE BKC   0x00000001 MSFT 
0x0100000A)
ACPI: MCFG @ 0x0xfd854/0x003C (v  1 DELL   PE BKC   0x00000001 MSFT 
0x0100000A)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 8
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 9, Interrupt 32 at 0xfec80000
ioapic1: Changing APIC ID to 9
ioapic1: WARNING: intbase 32 != expected base 24
MADT: Found IO APIC ID 10, Interrupt 64 at 0xfec83000
ioapic2: Changing APIC ID to 10
ioapic2: WARNING: intbase 64 != expected base 56
MADT: Found IO APIC ID 11, Interrupt 96 at 0xfec84000
ioapic3: Changing APIC ID to 11
ioapic3: WARNING: intbase 96 != expected base 88
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic6: Routing NMI -> LINT1
lapic6: LINT1 trigger: edge
lapic6: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic7: Routing NMI -> LINT1
lapic7: LINT1 trigger: edge
lapic7: LINT1 polarity: high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 64-87 on motherboard
ioapic3 <Version 2.0> irqs 96-119 on motherboard
cpu0 BSP:
    ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
 timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Jun  7 2007 21:38:33)
acpi0: <DELL PE BKC> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on 
acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 1 hz: 14318180 opts: leg_route 
count_size
Timecounter "HPET" frequency 14318180 Hz quality 2000
acpi0: Power Button (fixed)
pci_open(1):    mode 1 addr port (0x0cf8) is 0x80080000
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=80] is there (id=35908086)
AcpiOsDerivePciId: \_SB_.PCI0.PBLO.D0F0.SCFG -> bus 4 dev 31 func 0
AcpiOsDerivePciId: \_SB_.PCI0.PBLO.D0F1.SCFG -> bus 4 dev 31 func 1
AcpiOsDerivePciId: \_SB_.PCI0.PBLO.D0F2.SCFG -> bus 4 dev 31 func 2
AcpiOsDerivePciId: \_SB_.PCI0.PBLO.D0F3.SCFG -> bus 4 dev 31 func 3
AcpiOsDerivePciId: \_SB_.PCI0.PBLO.D0F4.SCFG -> bus 4 dev 31 func 4
AcpiOsDerivePciId: \_SB_.PCI0.PBLO.D0F5.SCFG -> bus 4 dev 31 func 5
AcpiOsDerivePciId: \_SB_.PCI0.PBLO.D0F6.SCFG -> bus 4 dev 31 func 6
AcpiOsDerivePciId: \_SB_.PCI0.PBLO.D0F7.SCFG -> bus 4 dev 31 func 7
AcpiOsDerivePciId: \_SB_.PCI0.VPR0.D0F0.SCFG -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \_SB_.PCI0.VPR0.D0F1.SCFG -> bus 0 dev 31 func 1
AcpiOsDerivePciId: \_SB_.PCI0.VPR0.D0F2.SCFG -> bus 0 dev 31 func 2
AcpiOsDerivePciId: \_SB_.PCI0.VPR0.D0F3.SCFG -> bus 0 dev 31 func 3
AcpiOsDerivePciId: \_SB_.PCI0.VPR0.D0F4.SCFG -> bus 0 dev 31 func 4
AcpiOsDerivePciId: \_SB_.PCI0.VPR0.D0F5.SCFG -> bus 0 dev 31 func 5
AcpiOsDerivePciId: \_SB_.PCI0.VPR0.D0F6.SCFG -> bus 0 dev 31 func 6
AcpiOsDerivePciId: \_SB_.PCI0.VPR0.D0F7.SCFG -> bus 0 dev 31 func 7
AcpiOsDerivePciId: \_SB_.PCI0.ISA_.P40C -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \_SB_.PCI0.ISA_.P41C -> bus 0 dev 31 func 0
ACPI timer: 1/0 1/1 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
 Initial Probe       0   11   N     0  3 4 5 6 7 10 11 12
 Validation          0   11   N     0  3 4 5 6 7 10 11 12
 After Disable       0  255   N     0  3 4 5 6 7 10 11 12
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
 Initial Probe       0    3   N     0  3 4 5 6 7 10 11 12
 Validation          0    3   N     0  3 4 5 6 7 10 11 12
 After Disable       0  255   N     0  3 4 5 6 7 10 11 12
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
 Initial Probe       0    7   N     0  3 4 5 6 7 10 11 12
 Validation          0    7   N     0  3 4 5 6 7 10 11 12
 After Disable       0  255   N     0  3 4 5 6 7 10 11 12
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
 Initial Probe       0   10   N     0  3 4 5 6 7 10 11 12
 Validation          0   10   N     0  3 4 5 6 7 10 11 12
 After Disable       0  255   N     0  3 4 5 6 7 10 11 12
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
 Initial Probe       0   11   N     0  3 4 5 6 7 10 11 12
 Validation          0   11   N     0  3 4 5 6 7 10 11 12
 After Disable       0  255   N     0  3 4 5 6 7 10 11 12
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
 Initial Probe       0   10   N     0  3 4 5 6 7 10 11 12
 Validation          0   10   N     0  3 4 5 6 7 10 11 12
 After Disable       0  255   N     0  3 4 5 6 7 10 11 12
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
 Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12
 Validation          0  255   N     0  3 4 5 6 7 10 11 12
 After Disable       0  255   N     0  3 4 5 6 7 10 11 12
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
 Initial Probe       0    5   N     0  3 4 5 6 7 10 11 12
 Validation          0    5   N     0  3 4 5 6 7 10 11 12
 After Disable       0  255   N     0  3 4 5 6 7 10 11 12
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x3590, revid=0x09
       bus=0, slot=0, func=0
       class=06-00-00, hdrtype=0x00, mfdev=1
       cmdreg=0x0146, statreg=0x0090, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3595, revid=0x09
       bus=0, slot=2, func=0
       class=06-04-00, hdrtype=0x01, mfdev=0
       cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
       lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=255
       powerspec 2  supports D0 D3  current D0
       MSI supports 2 messages
found-> vendor=0x8086, dev=0x3597, revid=0x09
       bus=0, slot=4, func=0
       class=06-04-00, hdrtype=0x01, mfdev=0
       cmdreg=0x0047, statreg=0x0018, cachelnsz=16 (dwords)
       lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=255
       powerspec 2  supports D0 D3  current D0
       MSI supports 2 messages
found-> vendor=0x8086, dev=0x3598, revid=0x09
       bus=0, slot=5, func=0
       class=06-04-00, hdrtype=0x01, mfdev=0
       cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
       lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=255
       powerspec 2  supports D0 D3  current D0
       MSI supports 2 messages
found-> vendor=0x8086, dev=0x3599, revid=0x09
       bus=0, slot=6, func=0
       class=06-04-00, hdrtype=0x01, mfdev=0
       cmdreg=0x0047, statreg=0x0018, cachelnsz=16 (dwords)
       lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=255
       powerspec 2  supports D0 D3  current D0
       MSI supports 2 messages
found-> vendor=0x8086, dev=0x24d2, revid=0x02
       bus=0, slot=29, func=0
       class=0c-03-00, hdrtype=0x00, mfdev=1
       cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=11
       map[20]: type I/O Port, range 32, base 0xace0, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24d4, revid=0x02
       bus=0, slot=29, func=1
       class=0c-03-00, hdrtype=0x00, mfdev=0
       cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
       intpin=b, irq=10
       map[20]: type I/O Port, range 32, base 0xacc0, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x24d7, revid=0x02
       bus=0, slot=29, func=2
       class=0c-03-00, hdrtype=0x00, mfdev=0
       cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
       intpin=c, irq=7
       map[20]: type I/O Port, range 32, base 0xaca0, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x24dd, revid=0x02
       bus=0, slot=29, func=7
       class=0c-03-20, hdrtype=0x00, mfdev=0
       cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
       intpin=d, irq=5
       powerspec 2  supports D0 D3  current D0
       map[10]: type Memory, range 32, base 0xdff00000, size 10, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0xc2
       bus=0, slot=30, func=0
       class=06-04-00, hdrtype=0x01, mfdev=0
       cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d0, revid=0x02
       bus=0, slot=31, func=0
       class=06-01-00, hdrtype=0x00, mfdev=1
       cmdreg=0x014f, statreg=0x0280, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24db, revid=0x02
       bus=0, slot=31, func=1
       class=01-01-8a, hdrtype=0x00, mfdev=0
       cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=255
       map[20]: type I/O Port, range 32, base 0xfc00, size  4, enabled
       map[24]: type Memory, range 32, base 0, size 10, memory disabled
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   3
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xdfc00000-0xdfefffff
pcib1:   prefetched decode 0xd8000000-0xd80fffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x8086, dev=0x0330, revid=0x06
       bus=1, slot=0, func=0
       class=06-04-00, hdrtype=0x01, mfdev=1
       cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
       lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
       powerspec 2  supports D0 D3  current D0
       MSI supports 1 message, 64 bit
found-> vendor=0x8086, dev=0x0332, revid=0x06
       bus=1, slot=0, func=2
       class=06-04-00, hdrtype=0x01, mfdev=1
       cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
       lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
       powerspec 2  supports D0 D3  current D0
       MSI supports 1 message, 64 bit
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0xdfd00000-0xdfefffff
pcib2:   prefetched decode 0xd8000000-0xd80fffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x1028, dev=0x0013, revid=0x06
       bus=2, slot=14, func=0
       class=01-04-00, hdrtype=0x00, mfdev=0
       cmdreg=0x0196, statreg=0x0230, cachelnsz=16 (dwords)
       lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=7
       powerspec 2  supports D0 D1 D3  current D0
       MSI supports 2 messages, 64 bit
       map[10]: type Prefetchable Memory, range 32, base 0xd80f0000, 
size 16, enabled
pcib2: requested memory range 0xd80f0000-0xd80fffff: good
pcib1: requested memory range 0xd80f0000-0xd80fffff: good
       map[18]: type Memory, range 32, base 0xdfdc0000, size 18, enabled
pcib2: requested memory range 0xdfdc0000-0xdfdfffff: good
pcib1: requested memory range 0xdfdc0000-0xdfdfffff: good
pcib2: matched entry for 2.14.INTA
pcib2: slot 14 INTA hardwired to IRQ 46
amr0: <LSILogic MegaRAID 1.53> mem 
0xd80f0000-0xd80fffff,0xdfdc0000-0xdfdfffff irq 46 at device 14.0 on pci2
amr0: Using 64-bit DMA
amr0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd80f0000
ioapic1: routing intpin 14 (PCI IRQ 46) to vector 49
amr0: [MPSAFE]
amr0: [ITHREAD]
amr0: delete logical drives supported by controller
amr0: <LSILogic PERC 4e/Di> Firmware 521S, BIOS H430, 256MB RAM
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0xf000-0xfff
pcib3:   no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0xf000-0xfff
pcib4:   no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pcib5:   secondary bus     5
pcib5:   subordinate bus   7
pcib5:   I/O decode        0xd000-0xefff
pcib5:   memory decode     0xdf700000-0xdfbfffff
pcib5:   no prefetched decode
pci5: <ACPI PCI bus> on pcib5
pci5: physical bus=5
found-> vendor=0x8086, dev=0x0329, revid=0x09
       bus=5, slot=0, func=0
       class=06-04-00, hdrtype=0x01, mfdev=1
       cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
       lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
       powerspec 2  supports D0 D3  current D0
       MSI supports 1 message, 64 bit
found-> vendor=0x8086, dev=0x032a, revid=0x09
       bus=5, slot=0, func=2
       class=06-04-00, hdrtype=0x01, mfdev=1
       cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
       lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
       powerspec 2  supports D0 D3  current D0
       MSI supports 1 message, 64 bit
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pcib6:   secondary bus     6
pcib6:   subordinate bus   6
pcib6:   I/O decode        0xe000-0xefff
pcib6:   memory decode     0xdfa00000-0xdfbfffff
pcib6:   no prefetched decode
pci6: <ACPI PCI bus> on pcib6
pci6: physical bus=6
found-> vendor=0x8086, dev=0x1076, revid=0x05
       bus=6, slot=7, func=0
       class=02-00-00, hdrtype=0x00, mfdev=0
       cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
       lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=11
       powerspec 2  supports D0 D3  current D0
       map[10]: type Memory, range 32, base 0xdfae0000, size 17, enabled
pcib6: requested memory range 0xdfae0000-0xdfafffff: good
pcib5: requested memory range 0xdfae0000-0xdfafffff: good
       map[18]: type I/O Port, range 32, base 0xecc0, size  6, enabled
pcib6: requested I/O range 0xecc0-0xecff: in range
pcib5: requested I/O range 0xecc0-0xecff: in range
pcib6: matched entry for 6.7.INTA
pcib6: slot 7 INTA hardwired to IRQ 64
em0: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> port 
0xecc0-0xecff mem 0xdfae0000-0xdfafffff irq 64 at device 7.0 on pci6
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdfae0000
em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xecc0
em0: bpf attached
em0: Ethernet address: 00:14:22:0e:e1:15
ioapic2: routing intpin 0 (PCI IRQ 64) to vector 50
em0: [FILTER]
pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
pcib7:   secondary bus     7
pcib7:   subordinate bus   7
pcib7:   I/O decode        0xd000-0xdfff
pcib7:   memory decode     0xdf800000-0xdf9fffff
pcib7:   no prefetched decode
pci7: <ACPI PCI bus> on pcib7
pci7: physical bus=7
found-> vendor=0x8086, dev=0x1076, revid=0x05
       bus=7, slot=8, func=0
       class=02-00-00, hdrtype=0x00, mfdev=0
       cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
       lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=3
       powerspec 2  supports D0 D3  current D0
       map[10]: type Memory, range 32, base 0xdf8e0000, size 17, enabled
pcib7: requested memory range 0xdf8e0000-0xdf8fffff: good
pcib5: requested memory range 0xdf8e0000-0xdf8fffff: good
       map[18]: type I/O Port, range 32, base 0xdcc0, size  6, enabled
pcib7: requested I/O range 0xdcc0-0xdcff: in range
pcib5: requested I/O range 0xdcc0-0xdcff: in range
pcib7: matched entry for 7.8.INTA
pcib7: slot 8 INTA hardwired to IRQ 65
em1: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> port 
0xdcc0-0xdcff mem 0xdf8e0000-0xdf8fffff irq 65 at device 8.0 on pci7
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdf8e0000
em1: Reserved 0x40 bytes for rid 0x18 type 4 at 0xdcc0
em1: bpf attached
em1: Ethernet address: 00:14:22:0e:e1:16
ioapic2: routing intpin 1 (PCI IRQ 65) to vector 51
em1: [FILTER]
pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib8:   secondary bus     8
pcib8:   subordinate bus   10
pcib8:   I/O decode        0xc000-0xcfff
pcib8:   memory decode     0xdf400000-0xdf6fffff
pcib8:   no prefetched decode
pci8: <ACPI PCI bus> on pcib8
pci8: physical bus=8
found-> vendor=0x8086, dev=0x0329, revid=0x09
       bus=8, slot=0, func=0
       class=06-04-00, hdrtype=0x01, mfdev=1
       cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
       lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
       powerspec 2  supports D0 D3  current D0
       MSI supports 1 message, 64 bit
found-> vendor=0x8086, dev=0x032a, revid=0x09
       bus=8, slot=0, func=2
       class=06-04-00, hdrtype=0x01, mfdev=1
       cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
       lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
       powerspec 2  supports D0 D3  current D0
       MSI supports 1 message, 64 bit
pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci8
pcib9:   secondary bus     9
pcib9:   subordinate bus   9
pcib9:   I/O decode        0xc000-0xcfff
pcib9:   memory decode     0xdf500000-0xdf6fffff
pcib9:   no prefetched decode
pci9: <ACPI PCI bus> on pcib9
pci9: physical bus=9
found-> vendor=0x8086, dev=0x1010, revid=0x01
       bus=9, slot=4, func=0
       class=02-00-00, hdrtype=0x00, mfdev=1
       cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
       lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=7
       powerspec 2  supports D0 D3  current D0
       MSI supports 1 message, 64 bit
       map[10]: type Memory, range 64, base 0xdf5e0000, size 17, enabled
pcib9: requested memory range 0xdf5e0000-0xdf5fffff: good
pcib8: requested memory range 0xdf5e0000-0xdf5fffff: good
       map[20]: type I/O Port, range 32, base 0xccc0, size  6, enabled
pcib9: requested I/O range 0xccc0-0xccff: in range
pcib8: requested I/O range 0xccc0-0xccff: in range
pcib9: matched entry for 9.4.INTA
pcib9: slot 4 INTA hardwired to IRQ 106
found-> vendor=0x8086, dev=0x1010, revid=0x01
       bus=9, slot=4, func=1
       class=02-00-00, hdrtype=0x00, mfdev=1
       cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
       lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
       intpin=b, irq=10
       powerspec 2  supports D0 D3  current D0
       MSI supports 1 message, 64 bit
       map[10]: type Memory, range 64, base 0xdf5c0000, size 17, enabled
pcib9: requested memory range 0xdf5c0000-0xdf5dffff: good
pcib8: requested memory range 0xdf5c0000-0xdf5dffff: good
       map[20]: type I/O Port, range 32, base 0xcc80, size  6, enabled
pcib9: requested I/O range 0xcc80-0xccbf: in range
pcib8: requested I/O range 0xcc80-0xccbf: in range
pcib9: matched entry for 9.4.INTB
pcib9: slot 4 INTB hardwired to IRQ 107
em2: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> port 
0xccc0-0xccff mem 0xdf5e0000-0xdf5fffff irq 106 at device 4.0 on pci9
em2: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdf5e0000
em2: Reserved 0x40 bytes for rid 0x20 type 4 at 0xccc0
em2: bpf attached
em2: Ethernet address: 00:04:23:bb:21:8c
ioapic3: routing intpin 10 (PCI IRQ 106) to vector 52
em2: [FILTER]
em3: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> port 
0xcc80-0xccbf mem 0xdf5c0000-0xdf5dffff irq 107 at device 4.1 on pci9
em3: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdf5c0000
em3: Reserved 0x40 bytes for rid 0x20 type 4 at 0xcc80
em3: bpf attached
em3: Ethernet address: 00:04:23:bb:21:8d
ioapic3: routing intpin 11 (PCI IRQ 107) to vector 53
em3: [FILTER]
pcib10: <ACPI PCI-PCI bridge> at device 0.2 on pci8
pcib10:   secondary bus     10
pcib10:   subordinate bus   10
pcib10:   I/O decode        0xf000-0xfff
pcib10:   no prefetched decode
pci10: <ACPI PCI bus> on pcib10
pci10: physical bus=10
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xace0-0xacff 
irq 16 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xace0
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 54
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xacc0-0xacdf 
irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xacc0
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 55
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xaca0-0xacbf 
irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xaca0
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 56
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
usb2: root hub problem, error=4
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 
0xdff00000-0xdff003ff irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xdff00000
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 57
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
usb3: root hub problem, error=4
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib11:   secondary bus     11
pcib11:   subordinate bus   11
pcib11:   I/O decode        0xb000-0xbfff
pcib11:   memory decode     0xdf200000-0xdf3fffff
pcib11:   prefetched decode 0xc8000000-0xd7ffffff
pcib11:   Subtractively decoded bridge.
pci11: <ACPI PCI bus> on pcib11
pci11: physical bus=11
found-> vendor=0x1028, dev=0x0011, revid=0x00
       bus=11, slot=5, func=0
       class=ff-00-00, hdrtype=0x00, mfdev=1
       cmdreg=0x0117, statreg=0x0290, cachelnsz=16 (dwords)
       lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=11
       powerspec 2  supports D0 D3  current D0
       map[10]: type Prefetchable Memory, range 32, base 0xd7fff000, 
size 12, enabled
pcib11: requested memory range 0xd7fff000-0xd7ffffff: good
       map[14]: type I/O Port, range 32, base 0xbcf8, size  3, enabled
pcib11: requested I/O range 0xbcf8-0xbcff: in range
       map[18]: type I/O Port, range 32, base 0xbce8, size  3, enabled
pcib11: requested I/O range 0xbce8-0xbcef: in range
pcib11: matched entry for 11.5.INTA
pcib11: slot 5 INTA hardwired to IRQ 20
found-> vendor=0x1028, dev=0x0012, revid=0x00
       bus=11, slot=5, func=1
       class=ff-00-00, hdrtype=0x00, mfdev=1
       cmdreg=0x0103, statreg=0x0290, cachelnsz=16 (dwords)
       lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
       intpin=b, irq=10
       powerspec 2  supports D0 D3  current D0
       map[10]: type Memory, range 32, base 0xdf2ff000, size 12, enabled
pcib11: requested memory range 0xdf2ff000-0xdf2fffff: good
       map[14]: type I/O Port, range 32, base 0xbc80, size  6, enabled
pcib11: requested I/O range 0xbc80-0xbcbf: in range
       map[18]: type Prefetchable Memory, range 32, base 0xd7f00000, 
size 19, enabled
pcib11: requested memory range 0xd7f00000-0xd7f7ffff: good
pcib11: matched entry for 11.5.INTB
pcib11: slot 5 INTB hardwired to IRQ 21
found-> vendor=0x1028, dev=0x0014, revid=0x00
       bus=11, slot=5, func=2
       class=ff-00-00, hdrtype=0x00, mfdev=1
       cmdreg=0x0103, statreg=0x0290, cachelnsz=16 (dwords)
       lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
       powerspec 2  supports D0 D3  current D0
found-> vendor=0x1095, dev=0x0680, revid=0x02
       bus=11, slot=6, func=0
       class=01-01-85, hdrtype=0x00, mfdev=0
       cmdreg=0x0107, statreg=0x0290, cachelnsz=1 (dwords)
       lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=5
       powerspec 2  supports D0 D1 D2 D3  current D0
       map[10]: type I/O Port, range 32, base 0xbcf0, size  3, enabled
pcib11: requested I/O range 0xbcf0-0xbcf7: in range
       map[14]: type I/O Port, range 32, base 0xbce4, size  2, enabled
pcib11: requested I/O range 0xbce4-0xbce7: in range
       map[18]: type I/O Port, range 32, base 0xbcd8, size  3, enabled
pcib11: requested I/O range 0xbcd8-0xbcdf: in range
       map[1c]: type I/O Port, range 32, base 0xbcd0, size  2, enabled
pcib11: requested I/O range 0xbcd0-0xbcd3: in range
       map[20]: type I/O Port, range 32, base 0xbc70, size  4, enabled
pcib11: requested I/O range 0xbc70-0xbc7f: in range
       map[24]: type Memory, range 32, base 0xdf2fec00, size  8, enabled
pcib11: requested memory range 0xdf2fec00-0xdf2fecff: good
pcib11: matched entry for 11.6.INTA
pcib11: slot 6 INTA hardwired to IRQ 23
found-> vendor=0x1002, dev=0x5159, revid=0x00
       bus=11, slot=13, func=0
       class=03-00-00, hdrtype=0x00, mfdev=0
       cmdreg=0x01a7, statreg=0x0290, cachelnsz=16 (dwords)
       lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=7
       powerspec 2  supports D0 D1 D2 D3  current D0
       map[10]: type Prefetchable Memory, range 32, base 0xc8000000, 
size 27, enabled
pcib11: requested memory range 0xc8000000-0xcfffffff: good
       map[14]: type I/O Port, range 32, base 0xb800, size  8, enabled
pcib11: requested I/O range 0xb800-0xb8ff: in range
       map[18]: type Memory, range 32, base 0xdf2e0000, size 16, enabled
pcib11: requested memory range 0xdf2e0000-0xdf2effff: good
pcib11: matched entry for 11.13.INTA
pcib11: slot 13 INTA hardwired to IRQ 18
pci11: <unknown> at device 5.0 (no driver attached)
uart0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xbc80
pcib11: uart0 requested I/O range 0xbc80-0xbcbf: in range
uart0: <Non-standard ns8250 class UART with FIFOs> port 0xbc80-0xbcbf 
mem 0xdf2ff000-0xdf2fffff,0xd7f00000-0xd7f7ffff irq 21 at device 5.1
on pci11
pcib11: uart0 requested I/O range 0xbc80-0xbcbf: in range
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 58
uart0: [FILTER]
uart0: fast interrupt
pci11: <unknown> at device 5.2 (no driver attached)
atapci0: <SiI 0680 UDMA133 controller> port 
0xbcf0-0xbcf7,0xbce4-0xbce7,0xbcd8-0xbcdf,0xbcd0-0xbcd3,0xbc70-0xbc7f 
mem 0xdf2fec00-0xdf2fecf
f irq 23 at device 6.0 on pci11
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbc70
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: Reserved 0x100 bytes for rid 0x24 type 3 at 0xdf2fec00
ata2: <ATA channel 0> on atapci0
ata2: reset tp1 mask=03 ostat0=40 ostat1=40
ata2: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata2: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata2: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
vgapci0: <VGA-compatible display> port 0xb800-0xb8ff mem 
0xc8000000-0xcfffffff,0xdf2e0000-0xdf2effff irq 18 at device 13.0 on pci11
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=00 ostat1=01
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x01 err=0x04 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 59
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 60
ata1: [MPSAFE]
ata1: [ITHREAD]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 73
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 61
fdc0: [FILTER]
device_attach: fdc0 attach returned 12
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 61
sio0: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 73
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 62
fdc0: [FILTER]
device_attach: fdc0 attach returned 12
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 
0xc0000-0xcafff,0xcb000-0xcbfff,0xd2800-0xd37ff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0xffffffff (1)
kbdc: RESET_KBD return code:00fe
kbdc: RESET_KBD return code:00fe
kbdc: RESET_KBD return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
atkbd: failed to reset the keyboard.
kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 62
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 241051 -> 100000
procfs registered
lapic: Divisor 2, Frequency 99756996 hz
Timecounter "TSC" frequency 3192223984 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
rr232x: no controller detected.
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80b961b8
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on ICH5 chip
acd0: setting UDMA33 on ICH5 chip
acd0: <TEAC CD-ROM CD-224E/K.9A> CDROM drive at ata0 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-slave: pio=PIO3 wdma=UNSUPPORTED udma=UNSUPPORTED cable=40 wire
ata2-master: pio=PIO3 wdma=UNSUPPORTED udma=UNSUPPORTED cable=40 wire
afd0: setting PIO3 on SiI 0680 chip
afd0: (no media) <VIRTUALFLOPPY DRIVE Floppy > at ata2-master PIO3


Fatal trap 18: integer divide fault while in kernel mode
cpuid = 0; apic id = 00
instruction pointer     = 0x8:0xffffffff802522f7
stack pointer           = 0x10:0xffffffff80f9cba0
frame pointer           = 0x10:0xffffffff80f9cc20
code segment            = base 0x0, limit 0xfffff, type 0x1b
                       = DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 0 (swapper)
[thread pid 0 tid 0 ]
Stopped at      afd_attach+0x2c7:       divq    %rcx,%eax
db>


At this point the machine freezes and i cannot trace or whatever.

P.S. please include me in CC as I'm not subscribed to both lists.

-- 

Best Wishes,
Stefan Lambrev
ICQ# 24134177



More information about the freebsd-amd64 mailing list