NForce5 not suported? (interrupt storm on ASUS M2N-E)

Angelo Turetta aturetta at commit.it
Tue Sep 5 15:06:58 PDT 2006


Phillip Neumann wrote:
> Hello.
> 
> I just got an Asus M2N-E wich has a NForce 570 chipset.
> 
> Got 4 SATA disks (seagate 250G), and when i plug in all the 4 disks,
> FreeBSD cannot boot. It freeze when detecting the drives. i.e.
> 
> ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
> ad4: xxxMB <Seagate yyyy> at ata2-master SATA150
> ad4: xxxxxxxxsectors [] .....
> ad4: nVidia check1 failed
> ad4: Adaptec check1 failed
> ad4: LSI (v3) check1 failed
> ad4: LSI (v2) check1 failed
> ad4: FreeBSD check1 failed
> ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
> ad6: xxxMB <Seagate yyyy> at ata3-master SATA150
> ad6: xxxxxxxxsectors [] .....
> aGEOM: new disk ad4
> GEOM: new disk ad6
> d6: nVidia check1 failed
> ad6: Adaptec check1 failed
> ad6: LSI (v3) check1 failed
> ad6: LSI (v2) check1 failed
> ad6: FreeBSD check1 failed
> ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
> 
> ^-------- here it freeze forever.
> 
> 
> If i take some disks out, i.e. leave 1 disk. thigs works 
> 
> It happens the same when i boot from the harddisk or the installCD (for
> the 4 drives connected)
> 
> Ive try to disable everything in the bois (including the IDE, USB, SATA
> Raid, etc).
> I did try to boot without acpi too.

Welcome on-board.
http://docs.freebsd.org/cgi/mid.cgi?44F2C9C6.7040907 (look also for 
referenced messages)

> It looks like nforce5 are not supported jet 
> is this true?

Not entirely. It is almost working: too bad as soon as the SATA disks 
are probed, the system is overflowed by a massive interrupt storm.

> Ive try with the iso snapshots of STABLE and CURRENT of august.

7-CURRENT with one disk only is able to complete setup (very slowly), 
though the problem is still present (try vmstat -i). 6-STABLE completely 
HANG as per your report. The same does 7-CURRENT with more than one ATA 
channel used: i.e. you can boot if you put two disks on ports SATA1 and 
SATA2 (ata2 master and slave), but it hangs if you try SATA1 and SATA3 
(ata2-master and ata3-master).

Unfortunately there wasn't any ack from interested party (I suspect it 
may be linked to ATA-SATA and/or ACPI routing of IRQ), so I think there 
are no developers in possess of that MB.

Angelo.


More information about the freebsd-amd64 mailing list