mounting usb on fbsd6beta4...
Adriaan de Groot
groot at kde.org
Sat Sep 17 06:05:54 PDT 2005
[Some notes from a user perspective, on 5.4]
On Saturday 17 September 2005 01:39, Jeff D. Hamann wrote:
> Sep 17 16:24:46 bobby kernel: umass0: vendor 0x090a product 0x1001, rev
> 1.10/1.00, addr 2
> Sep 17 16:24:46 bobby kernel: da0 at umass-sim0 bus 0 target 0 lun 0
> Sep 17 16:24:46 bobby kernel: da0: <STORIX AXIS 1.00> Removable Direct
> Access SCSI-0 device
> Sep 17 16:24:46 bobby kernel: da0: 1.000MB/s transfers
> Sep 17 16:24:46 bobby kernel: da0: 250MB (512000 512 byte sectors: 64H
> 32S/T 250C)
This is largely to be expected -- there's a umass device being found, it's
being mapped to a SCSI disk device, it has a lousy transfer rate because you
plugged it into a USB1 port, and it's 250MB (a weird size, maybe). I get very
similar output with either my USB1 key (64M) or my removeable HDD (12G
leftover piece of junk in a generic USB HDD enclosure).
> Sep 17 16:24:46 bobby kernel: da1 at umass-sim0 bus 0 target 0 lun 1
That's odd. I don't particularly see why one device would show up as two SCSI
disks (though it's not impossible).
> Sep 17 16:24:46 bobby kernel: (da0:umass-sim0:0:0:0): Synchronize cache
> failed, status == 0x4, scsi status == 0x0
Typicaly missing quirk. There was a quirks table early on in 5.X's life which
I believe has been removed by now. The quirks documented weird behavior that
specific USB devices have. In fact, I have a 128M USB stick that -- once I
had put in the right quirks -- worked fairly well, but now crashes the system
hard on removal.
So it's not _just_ you, there's more USB devices out there that give trouble
-- at least on 5-STABLE still. Whether any of my rambling applies to
6-CURRENT, I don't know.
These are your friends - Adem
GPG: FEA2 A3FE Adriaan de Groot
More information about the freebsd-amd64