amd64/89550: [amd64] sym0: VTOBUS failed (6.0 Release)
Scott Long
scottl at samsco.org
Fri Nov 25 20:50:15 GMT 2005
The following reply was made to PR amd64/89550; it has been noted by GNATS.
From: Scott Long <scottl at samsco.org>
To: Aaron Wallace <awallac3 at uiuc.edu>
Cc: freebsd-gnats-submit at freebsd.org
Subject: Re: amd64/89550: [amd64] sym0: VTOBUS failed (6.0 Release)
Date: Fri, 25 Nov 2005 13:43:15 -0700
Aaron Wallace wrote:
>>Number: 89550
>>Category: amd64
>>Synopsis: [amd64] sym0: VTOBUS failed (6.0 Release)
>>Confidential: no
>>Severity: serious
>>Priority: medium
>>Responsible: freebsd-amd64
>>State: open
>>Quarter:
>>Keywords:
>>Date-Required:
>>Class: sw-bug
>>Submitter-Id: current-users
>>Arrival-Date: Fri Nov 25 20:40:02 GMT 2005
>>Closed-Date:
>>Last-Modified:
>>Originator: Aaron Wallace
>>Release: 6.0 Release
>>Organization:
>
> n/a
>
>>Environment:
>>Description:
>
> Ever since I switched to amd64, I have been having problems with my symbios / lsi logic 21010 scsi card. I tried it initially on an nforce2 chipset, and was getting this error message:
>
> panic: sym0 : VTOBUS FAILED!
>
> About a year ago someone was helping address the problem, and I thought that a patch he had made (6.0-current at the time) had corrected the problem. I think maybe this was just a matter of luck though, because now the problem seems to have resurfaced, this time on an nforce4 chipset.
>
> dmesg output follows:
>
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-RELEASE #0: Wed Nov 2 19:07:38 UTC 2005
> root at rat.samsco.home:/usr/obj/usr/src/sys/GENERIC
> ACPI APIC Table: <Nvidia AWRDACPI>
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Athlon(tm) 64 Processor 3200+ (2120.03-MHz K8-class CPU)
> Origin = "AuthenticAMD" Id = 0x20ff0 Stepping = 0
> Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
> Features2=0x1<SSE3>
> AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
> real memory = 1073676288 (1023 MB)
> avail memory = 1025216512 (977 MB)
> ioapic0 <Version 1.1> irqs 0-23 on motherboard
> acpi0: <Nvidia AWRDACPI> on motherboard
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi0: Power Button (fixed)
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> pci_link0: <ACPI PCI Link LNK1> irq 10 on acpi0
> pci_link1: <ACPI PCI Link LNK2> irq 11 on acpi0
> pci_link2: <ACPI PCI Link LNK3> irq 5 on acpi0
> pci_link3: <ACPI PCI Link LNK4> irq 10 on acpi0
> pci_link4: <ACPI PCI Link LNK5> on acpi0
> pci_link5: <ACPI PCI Link LUBA> irq 10 on acpi0
> pci_link6: <ACPI PCI Link LUBB> on acpi0
> pci_link7: <ACPI PCI Link LMAC> irq 5 on acpi0
> pci_link8: <ACPI PCI Link LACI> irq 11 on acpi0
> pci_link9: <ACPI PCI Link LMCI> on acpi0
> pci_link10: <ACPI PCI Link LSMB> irq 5 on acpi0
> pci_link11: <ACPI PCI Link LUB2> irq 11 on acpi0
> pci_link12: <ACPI PCI Link LIDE> on acpi0
> pci_link13: <ACPI PCI Link LSID> on acpi0
> pci_link14: <ACPI PCI Link LFID> on acpi0
> pci_link15: <ACPI PCI Link LPCA> on acpi0
> pci_link16: <ACPI PCI Link APC1> irq 0 on acpi0
> pci_link17: <ACPI PCI Link APC2> irq 0 on acpi0
> pci_link18: <ACPI PCI Link APC3> irq 0 on acpi0
> pci_link19: <ACPI PCI Link APC4> irq 0 on acpi0
> pci_link20: <ACPI PCI Link APC5> irq 16 on acpi0
> pci_link21: <ACPI PCI Link APCF> irq 0 on acpi0
> pci_link22: <ACPI PCI Link APCG> irq 0 on acpi0
> pci_link23: <ACPI PCI Link APCH> irq 0 on acpi0
> pci_link24: <ACPI PCI Link APCJ> irq 0 on acpi0
> pci_link25: <ACPI PCI Link APCK> irq 0 on acpi0
> pci_link26: <ACPI PCI Link APCS> irq 0 on acpi0
> pci_link27: <ACPI PCI Link APCL> irq 0 on acpi0
> pci_link28: <ACPI PCI Link APCZ> irq 0 on acpi0
> pci_link29: <ACPI PCI Link APSI> irq 0 on acpi0
> pci_link30: <ACPI PCI Link APSJ> irq 0 on acpi0
> pci_link31: <ACPI PCI Link APCP> irq 0 on acpi0
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> acpi_button0: <Power Button> on acpi0
> acpi_button1: <Sleep Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci_link26: BIOS IRQ 5 for -2145774616.1.INTA is invalid
> pci_link21: BIOS IRQ 10 for -2145774616.2.INTA is invalid
> pci_link27: BIOS IRQ 11 for -2145774616.2.INTB is invalid
> pci_link23: BIOS IRQ 5 for -2145774616.10.INTA is invalid
> pci_link24: BIOS IRQ 11 for -2145774616.4.INTA is invalid
> pci0: <ACPI PCI bus> on pcib0
> pci0: <memory> at device 0.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 1.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
> ohci0: <OHCI (generic) USB controller> mem 0xfebff000-0xfebfffff irq 21 at device 2.0 on pci0
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 10 ports with 10 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebfe000-0xfebfe0ff irq 22 at device 2.1 on pci0
> ehci0: [GIANT-LOCKED]
> usb1: EHCI version 1.0
> usb1: companion controller, 4 ports each: usb0
> usb1: <EHCI (generic) USB 2.0 controller> on ehci0
> usb1: USB revision 2.0
> uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub1: 10 ports with 10 removable, self powered
> pci0: <multimedia, audio> at device 4.0 (no driver attached)
> atapci0: <nVidia nForce4 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 6.0 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
> pci_link18: BIOS IRQ 21 for 0.10.INTA is invalid
> pci1: <ACPI PCI bus> on pcib1
> pci1: <multimedia, audio> at device 7.0 (no driver attached)
> pci1: <input device> at device 7.1 (no driver attached)
> sym0: <1010-33> port 0xc400-0xc4ff mem 0xfeaff000-0xfeaff3ff,0xfeafc000-0xfeafdfff irq 16 at device 8.0 on pci1
> sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
> sym0: open drain IRQ line driver, using on-chip SRAM
> sym0: using LOAD/STORE-based firmware.
> sym0: handling phase mismatch from SCRIPTS.
> sym0: SCAN AT BOOT disabled for targets 1 2 4 5 8 9 10 11 12 13 14 15.
> sym0: SCAN FOR LUNS disabled for targets 0 3 6.
> sym0: [GIANT-LOCKED]
> sym1: <1010-33> port 0xc000-0xc0ff mem 0xfeafe000-0xfeafe3ff,0xfeafa000-0xfeafbfff irq 17 at device 8.1 on pci1
> sym1: Symbios NVRAM, ID 7, Fast-80, SE, parity checking
> sym1: open drain IRQ line driver, using on-chip SRAM
> sym1: using LOAD/STORE-based firmware.
> sym1: handling phase mismatch from SCRIPTS.
> sym1: SCAN AT BOOT disabled for targets 1 2 3 4 5 6 8 9 10 11 12 13 14 15.
> sym1: SCAN FOR LUNS disabled for targets 0 1 2 3 4 5 6 8 9 10 11 12 13 14 15.
> sym1: [GIANT-LOCKED]
> sym2: <810a> port 0xbc00-0xbcff mem 0xfe9ff000-0xfe9ff0ff irq 18 at device 10.0 on pci1
> sym2: No NVRAM, ID 7, Fast-10, SE, parity checking
> sym2: [GIANT-LOCKED]
> nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xdc00-0xdc07 mem 0xfebfb000-0xfebfbfff irq 21 at device 10.0 on pci0
> nve0: Ethernet address 00:50:70:56:4b:68
> miibus0: <MII bus> on nve0
> ciphy0: <Cicada CS8201 10/100/1000TX PHY> on miibus0
> ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
> nve0: Ethernet address: 00:50:70:56:4b:68
> nve0: [GIANT-LOCKED]
> pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
> pci5: <ACPI PCI bus> on pcib5
> pci5: <display, VGA> at device 0.0 (no driver attached)
> acpi_tz0: <Thermal Zone> on acpi0
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
> ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/16 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd3fff,0xd4000-0xd57ff,0xd6000-0xd9fff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1
> ums0: 3 buttons and Z dir.
> umass0: Generic USB Storage Device, rev 1.10/30.0a, addr 3
> Timecounter "TSC" frequency 2120029086 Hz quality 800
> Timecounters tick every 1.000 msec
> Waiting 5 seconds for SCSI devices to settle
> (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
> (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
> acd0: DVDR <PIONEER DVD-RW DVR-106D/1.05> at ata0-slave UDMA33
> (probe32:sym2:0:2:0): phase change 6-7 6 at 3db89198 resid=4.
> pass4 at sym2 bus 0 target 2 lun 0
> pass4: <HP C5110A 3701> Fixed Processor SCSI-2 device
> pass4: 3.300MB/s transfers
> da0 at sym0 bus 0 target 0 lun 0
> da0: <COMPAQ BF03665223 B014> Fixed Direct Access SCSI-3 device
> da0: 160.000MB/s transfers (80.000MHz, offset 31, 16bit)
> da0: 34732MB (71132000 512 byte sectors: 255H 63S/T 4427C)
> da1 at sym0 bus 0 target 3 lun 0
> da1: <QUANTUM ATLAS10K2-TY184L DDD6> Fixed Direct Access SCSI-3 device
> da1: 160.000MB/s transfers (80.000MHz, offset 62, 16bit)
> da1: 17510MB (35860910 512 byte sectors: 255H 63S/T 2232C)
> da2 at sym0 bus 0 target 6 lun 0
> da2: <IBM IC35L036UWDY10-0 S29A> Fixed Direct Access SCSI-3 device
> da2: 160.000MB/s transfers (80.000MHz, offset 62, 16bit)
> da2: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
> cd0 at sym1 bus 0 target 0 lun 0
> cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
> cd0: 10.000MB/s transfers (10.000MHz, offset 16)
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> da3 at umass-sim0 bus 0 target 0 lun 0
> da3: <CBOX3 USB Storage-SMC 300A> Removable Direct Access SCSI-0 device
> da3: 1.000MB/s transfers
> da3: Attempt to query device size failed: NOT READY, Medium not present
> da4 at umass-sim0 bus 0 target 0 lun 1
> da4: <CBOX3 USB Storage-CFC 300A> Removable Direct Access SCSI-0 device
> da4: 1.000MB/s transfers
> da4: Attempt to query device size failed: NOT READY, Medium not present
> da5 at umass-sim0 bus 0 target 0 lun 2
> da5: <CBOX3 USB Storage-MMC 300A> Removable Direct Access SCSI-0 device
> da5: 1.000MB/s transfers
> da5: Attempt to query device size failed: NOT READY, Medium not present
> da6 at umass-sim0 bus 0 target 0 lun 3
> da6: <CBOX3 USB Storage-MSC 300A> Removable Direct Access SCSI-0 device
> da6: 1.000MB/s transfers
> da6: Attempt to query device size failed: NOT READY, Medium not present
> (da3:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da3:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da3:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da3:umass-sim0:0:0:0): NOT READY asc:3a,0
> (da3:umass-sim0:0:0:0): Medium not present
> (da3:umass-sim0:0:0:0): Unretryable error
> Opened disk da3 -> 6
> (da3:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da3:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da3:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da3:umass-sim0:0:0:0): NOT READY asc:3a,0
> (da3:umass-sim0:0:0:0): Medium not present
> (da3:umass-sim0:0:0:0): Unretryable error
> Opened disk da3 -> 6
> (da3:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da3:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da3:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da3:umass-sim0:0:0:0): NOT READY asc:3a,0
> (da3:umass-sim0:0:0:0): Medium not present
> (da3:umass-sim0:0:0:0): Unretryable error
> Opened disk da3 -> 6
> (da4:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
> (da4:umass-sim0:0:0:1): CAM Status: SCSI Status Error
> (da4:umass-sim0:0:0:1): SCSI Status: Check Condition
> (da4:umass-sim0:0:0:1): NOT READY asc:3a,0
> (da4:umass-sim0:0:0:1): Medium not present
> (da4:umass-sim0:0:0:1): Unretryable error
> Opened disk da4 -> 6
> (da4:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
> (da4:umass-sim0:0:0:1): CAM Status: SCSI Status Error
> (da4:umass-sim0:0:0:1): SCSI Status: Check Condition
> (da4:umass-sim0:0:0:1): NOT READY asc:3a,0
> (da4:umass-sim0:0:0:1): Medium not present
> (da4:umass-sim0:0:0:1): Unretryable error
> Opened disk da4 -> 6
> (da4:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
> (da4:umass-sim0:0:0:1): CAM Status: SCSI Status Error
> (da4:umass-sim0:0:0:1): SCSI Status: Check Condition
> (da4:umass-sim0:0:0:1): NOT READY asc:3a,0
> (da4:umass-sim0:0:0:1): Medium not present
> (da4:umass-sim0:0:0:1): Unretryable error
> Opened disk da4 -> 6
> (da5:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
> (da5:umass-sim0:0:0:2): CAM Status: SCSI Status Error
> (da5:umass-sim0:0:0:2): SCSI Status: Check Condition
> (da5:umass-sim0:0:0:2): NOT READY asc:3a,0
> (da5:umass-sim0:0:0:2): Medium not present
> (da5:umass-sim0:0:0:2): Unretryable error
> Opened disk da5 -> 6
> (da5:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
> (da5:umass-sim0:0:0:2): CAM Status: SCSI Status Error
> (da5:umass-sim0:0:0:2): SCSI Status: Check Condition
> (da5:umass-sim0:0:0:2): NOT READY asc:3a,0
> (da5:umass-sim0:0:0:2): Medium not present
> (da5:umass-sim0:0:0:2): Unretryable error
> Opened disk da5 -> 6
> (da5:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
> (da5:umass-sim0:0:0:2): CAM Status: SCSI Status Error
> (da5:umass-sim0:0:0:2): SCSI Status: Check Condition
> (da5:umass-sim0:0:0:2): NOT READY asc:3a,0
> (da5:umass-sim0:0:0:2): Medium not present
> (da5:umass-sim0:0:0:2): Unretryable error
> Opened disk da5 -> 6
> (da6:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
> (da6:umass-sim0:0:0:3): CAM Status: SCSI Status Error
> (da6:umass-sim0:0:0:3): SCSI Status: Check Condition
> (da6:umass-sim0:0:0:3): NOT READY asc:3a,0
> (da6:umass-sim0:0:0:3): Medium not present
> (da6:umass-sim0:0:0:3): Unretryable error
> Opened disk da6 -> 6
> (da6:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
> (da6:umass-sim0:0:0:3): CAM Status: SCSI Status Error
> (da6:umass-sim0:0:0:3): SCSI Status: Check Condition
> (da6:umass-sim0:0:0:3): NOT READY asc:3a,0
> (da6:umass-sim0:0:0:3): Medium not present
> (da6:umass-sim0:0:0:3): Unretryable error
> Opened disk da6 -> 6
> (da6:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
> (da6:umass-sim0:0:0:3): CAM Status: SCSI Status Error
> (da6:umass-sim0:0:0:3): SCSI Status: Check Condition
> (da6:umass-sim0:0:0:3): NOT READY asc:3a,0
> (da6:umass-sim0:0:0:3): Medium not present
> (da6:umass-sim0:0:0:3): Unretryable error
> Opened disk da6 -> 6
> Trying to mount root from ufs:/dev/da1s1a
>
> Typically, I will either get the message immediately after detection of the sym0 <1010> chip or after acd0 (following scsi bus reset). Of course at either of these points the boot sequence halts and it gives me 15 seconds to reboot.
>
>>How-To-Repeat:
>
> I've tried several combinations of enabling/disabling various motherboard components, but haven't found the exact recipe to repeat the problem consistently. There is clearly some randomness to the problem because I can boot twice in a row with the same settings and it will work one time and not the other. Some factors that seem to have some influence on the problem are the enabling/disabling of the onboard USB in BIOS and perhaps whether or not I enable or disable ACPI on the boot menu (you can see the re are some issues with acpi from dmesg, but I can't tell if this is because of the symbios card or not). When I first booted up with the installation cdrom, I had to disable the onboard USB controller to get it to the install menu - this seemed to work consistently. Then once I started booting up from the hard drive, disabling the onboard USB didn't help. I re-enabled onboard USB and tried it again with ACPI disabled from the boot menu and it failed again. I rebooted
on
e
> more time with USB enabled and ACPI enabled and it worked - the very same scenario in which it failed immediately after installation.
>
>>Fix:
>
> So far I don't have a fix to the problem, but would be willing to try any suggestions or patches. I should note here also that my nvidia ethernet controller (nve) isn't working at the moment either, so no networking available atm either.
>
>>Release-Note:
>>Audit-Trail:
>>Unformatted:
>
I'm already working on fixing this.
Scott
More information about the freebsd-amd64
mailing list