amd64/89549: [amd64] nve timeouts on 6.0-release

[Aaron Wallace]

>Number:         89549
>Category:       amd64
>Synopsis:       [amd64] nve timeouts on 6.0-release
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-amd64
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Fri Nov 25 20:10:08 GMT 2005
>Closed-Date:
>Last-Modified:
>Originator:     Aaron Wallace
>Release:        6.0 Release
>Organization:
n/a
>Environment:
>Description:
Nvidia nforce4 ethernet controller (nve) gets timeouts during attempts to use ethernet.  I can't use the ethernet controller at all.

dmesg output follows:

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Wed Nov  2 19:07:38 UTC 2005
    root at rat.samsco.home:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2120.03-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20ff0  Stepping = 0
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory  = 1073676288 (1023 MB)
avail memory = 1025216512 (977 MB)
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <multimedia, audio> at device 4.0 (no driver attached)
atapci0: <nVidia nForce4 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib1: <PCI-PCI bridge> at device 9.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <multimedia, audio> at device 7.0 (no driver attached)
pci1: <input device> at device 7.1 (no driver attached)
sym0: <1010-33> port 0xc400-0xc4ff mem 0xfeaff000-0xfeaff3ff,0xfeafc000-0xfeafdfff irq 10 at device 8.0 on pci1
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: SCAN AT BOOT disabled for targets 1 2 4 5 8 9 10 11 12 13 14 15.
sym0: SCAN FOR LUNS disabled for targets 0 3 6.
sym0: [GIANT-LOCKED]
sym1: <1010-33> port 0xc000-0xc0ff mem 0xfeafe000-0xfeafe3ff,0xfeafa000-0xfeafbfff irq 11 at device 8.1 on pci1
sym1: Symbios NVRAM, ID 7, Fast-80, SE, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
sym1: SCAN AT BOOT disabled for targets 1 2 3 4 5 6 8 9 10 11 12 13 14 15.
sym1: SCAN FOR LUNS disabled for targets 0 1 2 3 4 5 6 8 9 10 11 12 13 14 15.
sym1: [GIANT-LOCKED]
sym2: <810a> port 0xbc00-0xbcff mem 0xfe9ff000-0xfe9ff0ff irq 12 at device 10.0 on pci1
sym2: No NVRAM, ID 7, Fast-10, SE, parity checking
sym2: [GIANT-LOCKED]
nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xdc00-0xdc07 mem 0xfebfb000-0xfebfbfff irq 10 at device 10.0 on pci0
nve0: Ethernet address 00:50:70:56:4b:68
miibus0: <MII bus> on nve0
ciphy0: <Cicada CS8201 10/100/1000TX PHY> on miibus0
ciphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nve0: Ethernet address: 00:50:70:56:4b:68
nve0: [GIANT-LOCKED]
pcib2: <PCI-PCI bridge> at device 11.0 on pci0
pci2: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 12.0 on pci0
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 13.0 on pci0
pci4: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 14.0 on pci0
pci5: <PCI bus> on pcib5
pci5: <display, VGA> at device 0.0 (no driver attached)
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd17ff,0xd2000-0xd5fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2120029028 Hz quality 800
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
acd0: DVDR <PIONEER DVD-RW DVR-106D/1.05> at ata0-slave UDMA33
(probe32:sym2:0:2:0): phase change 6-7 6 at 3db87198 resid=4.
pass4 at sym2 bus 0 target 2 lun 0
pass4: <HP C5110A 3701> Fixed Processor SCSI-2 device 
pass4: 3.300MB/s transfers
da0 at sym0 bus 0 target 0 lun 0
da0: <COMPAQ BF03665223 B014> Fixed Direct Access SCSI-3 device 
da0: 160.000MB/s transfers (80.000MHz, offset 31, 16bit)
da0: 34732MB (71132000 512 byte sectors: 255H 63S/T 4427C)
da1 at sym0 bus 0 target 3 lun 0
da1: <QUANTUM ATLAS10K2-TY184L DDD6> Fixed Direct Access SCSI-3 device 
da1: 160.000MB/s transfers (80.000MHz, offset 62, 16bit)
da1: 17510MB (35860910 512 byte sectors: 255H 63S/T 2232C)
da2 at sym0 bus 0 target 6 lun 0
da2: <IBM IC35L036UWDY10-0 S29A> Fixed Direct Access SCSI-3 device 
da2: 160.000MB/s transfers (80.000MHz, offset 62, 16bit)
da2: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
cd0 at sym1 bus 0 target 0 lun 0
cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device 
cd0: 10.000MB/s transfers (10.000MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/da1s1a
nve0: link state changed to UP
nve0: device timeout (1)
nve0: link state changed to DOWN
nve0: link state changed to UP
nve0: device timeout (2)
nve0: link state changed to DOWN
nve0: link state changed to UP
nve0: device timeout (3)
nve0: link state changed to DOWN
nve0: link state changed to UP
nve0: device timeout (4)
nve0: link state changed to DOWN
nve0: link state changed to UP
>How-To-Repeat:
Occurs on any attempt to use nve.
>Fix:

>Release-Note:
>Audit-Trail:
>Unformatted: