nforce4 crashes at boot with 6.0-CURRENT-SNAP004-amd64-disc1.iso

[Andrew Gallatin]

This is transcribed by hand from a screen across the room

acd0: DVDROM <LITE-ON DVD ....>
ata4: CONNECT requested
ata4: DISCONNECT requested
ata5: CONNECT requested
ata5: DISCONNECT requested
ata4: CONNECTED
ata4: CONNECT requested
ata4: DISCONNECT requested
ata5: CONNECT requested
ata5: DISCONNECT requested
ata4: CONNECT requested
ata4: DISCONNECT requested
ata5: CONNECT requested
ata5: DISCONNECT requested

fault virt. address = 0x50
instr ptr  = 0x0:0xffffffff803c31e2
<...>

stack:
device_attach+0x22
bus_generic_attach+0x18
ata_identify+0xe6
ata_sata_phy_event+0xa2
taskqueue_run
fork_exit
fork_trampoline


Amusingly, it finds both the sk0 and nve0 devices on this board.

Linux lists the hardware as:
00:00.0 Class 0580: 10de:005e (rev a3)
00:01.0 Class 0601: 10de:0050 (rev a3)
00:01.1 Class 0c05: 10de:0052 (rev a2)
00:02.0 Class 0c03: 10de:005a (rev a2)
00:02.1 Class 0c03: 10de:005b (rev a3)
00:06.0 Class 0101: 10de:0053 (rev a2)
00:07.0 Class 0101: 10de:0054 (rev a3)
00:08.0 Class 0101: 10de:0055 (rev a3)
00:09.0 Class 0604: 10de:005c (rev a2)
00:0a.0 Class 0200: 10de:0057 (rev a3)
00:0b.0 Class 0604: 10de:005d (rev a3)
00:0c.0 Class 0604: 10de:005d (rev a3)
00:0d.0 Class 0604: 10de:005d (rev a3)
00:0e.0 Class 0604: 10de:005d (rev a3)
01:06.0 Class 0300: 1002:5159
01:09.0 Class 0c00: 1106:3044 (rev 80)
01:0a.0 Class 0200: 11ab:4320 (rev 13)

The IDE controllers are:

00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)


I know Soren is working on this.  Has there been any progress since
June2, which was the date of the 6.0-CURRENT-SNAP004-amd64-disc1.iso snap?

Drew