X not properly installed AMD64 Tyan S2885

[misnagid]

I just did a new unstall of FreeBDS 5.3 RELEASE for AMD64 on a dual Opteron 4
GB DRAM Tyan S2885.  Unlike other entries here, this new install was not done
with the RAID 3ware driver.  Nor were the symptoms alike.
The install went along fine till when the x86congfig was supposed to become
available and be run during install.  There were no such commands available. 
X does not properly start.

Please assist.
Jerry

/var/log/kdm.log:
********************************************************************************
Note that your system uses syslog. All of kdm's internally generated messages
(i.e., not from libraries and external programs/scripts it uses) go to the
daemon.* syslog facility; check your syslog configuration to find out to
which
file(s) it is logged. PAM logs messages related to authentication to
authpriv.*.
********************************************************************************


Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
Build Operating System: FreeBSD 5.3 amd64 [ELF] 
Current Operating System: FreeBSD chassid.sothfd01.mi.comcast.net 5.3-RELEASE
FreeBSD 5.3-RELEASE #0: Fri Nov  5 03:50:01 UTC 2004    
root at fanboy.samsco.home:/usr/obj/usr/src/sys/GENERIC amd64
Build Date: 13 October 2004
	Before reporting problems, check http://wiki.X.Org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov  8 23:51:40 2004
(EE) Unable to locate/open config file
xf86AutoConfig: Primary PCI is 5:0:0
Running "/usr/X11R6/bin/getconfig -X 60700000 -I
/etc/X11,/usr/X11R6/etc/X11,/usr/X11R6/lib/modules,/usr/X11R6/lib/X11/getconfig
-v 0x10de -d 0x0331 -r 0xa1 -s 0x10b0 -b 0x0407 -c 0x0300"
getconfig.pl: Version 1.0.
getconfig.pl: Xorg Version: 6.7.0.0.
getconfig.pl: 23 built-in rules.
getconfig.pl: file '/usr/X11R6/lib/X11/getconfig/xorg.cfg' has bad signature.
getconfig.pl: no rules in file '/usr/X11R6/lib/X11/getconfig/xorg.cfg'.
getconfig.pl: Evaluated 23 rules with 0 errors.
getconfig.pl: Weight of result is 500.
New driver is "nv"
(==) Using default built-in configuration (53 lines)
(EE) Failed to load module "fbdev" (module does not exist, 0)

Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
Build Operating System: FreeBSD 5.3 amd64 [ELF] 
Current Operating System: FreeBSD chassid.sothfd01.mi.comcast.net 5.3-RELEASE
FreeBSD 5.3-RELEASE #0: Fri Nov  5 03:50:01 UTC 2004    
root at fanboy.samsco.home:/usr/obj/usr/src/sys/GENERIC amd64
Build Date: 13 October 2004
	Before reporting problems, check http://wiki.X.Org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov  9 00:38:08 2004
(EE) Unable to locate/open config file
xf86AutoConfig: Primary PCI is 5:0:0
Running "/usr/X11R6/bin/getconfig -X 60700000 -I
/etc/X11,/usr/X11R6/etc/X11,/usr/X11R6/lib/modules,/usr/X11R6/lib/X11/getconfig
-v 0x10de -d 0x0331 -r 0xa1 -s 0x10b0 -b 0x0407 -c 0x0300"
getconfig.pl: Version 1.0.
getconfig.pl: Xorg Version: 6.7.0.0.
getconfig.pl: 23 built-in rules.
getconfig.pl: file '/usr/X11R6/lib/X11/getconfig/xorg.cfg' has bad signature.
getconfig.pl: no rules in file '/usr/X11R6/lib/X11/getconfig/xorg.cfg'.
getconfig.pl: Evaluated 23 rules with 0 errors.
getconfig.pl: Weight of result is 500.
New driver is "nv"
(==) Using default built-in configuration (53 lines)
(EE) Failed to load module "fbdev" (module does not exist, 0)