shaky support or my system?

[Yura Socolov]

On Wed, Feb 04, 2004 at 03:30:11PM -0600, James Van Artsdalen wrote:
> > Date: Wed, 4 Feb 2004 06:07:19 -0600 (CST)
> > From: James Van Artsdalen <james at jrv.org>
> > 
> > > From: Adriaan de Groot <adridg at cs.kun.nl>
> > > Date: Wed, 4 Feb 2004 12:51:45 +0100
> > > 
> > > > in either fbsd5.2 nor the recent 5.2.1RC. One of the things that makes
> > > > it crash for sure is the /usr/ports/benchmarks/ubench program. It does
> > > 
> > > Don't run that, it'll just tell you that the system is only marginally faster 
> > > than the athlon XP it replaces. 
> > 
> > I've reproduced Janne's panic with ubench twice.  Both show similar
> > outputs from the panic.  Panic #3 is proving more elusive: I'm running
> > ubench for the fourth time in a row now waiting for crash #3.
> 
> Unfortunately it appears my case was a false alarm.
> My Tyan K8W S2885 is not stable unless ECC is turned off in ROM setup.

Likely, i've been running ubench in a continuous loop while doing a make world
and transferring large quantities of data to and from  the box. No panic, 
no problems, other than a load avg of 17 at times, but that's ubench's fault.

Athlon 64 3K, FIC K8-800T, DDR400. uname/dmesg follows.

-- yu

FreeBSD 5.2.1-RC #2: Wed Feb  4 21:10:18 EST 2004
    yura at kussi.31337.net:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80865000.
ACPI APIC Table: <FIC    K8-800T >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (1999.79-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0xf48  Stepping = 8
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500000<NX,MMX+,LM,3DNow!+,3DNow!>
real memory  = 536805376 (511 MB)
avail memory = 500088832 (476 MB)
ioapic0 <Version 0.3> irqs 0-23 on motherboard
acpi0: <FIC    K8-800T > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: possible interrupts:  20
pcib0: slot 15 INTB routed to irq 20 via \\_SB_.PCI0.ALKA
pcib0: possible interrupts:  21
pcib0: slot 16 INTA routed to irq 21 via \\_SB_.PCI0.ALKB
pcib0: possible interrupts:  21
pcib0: slot 16 INTA routed to irq 21 via \\_SB_.PCI0.ALKB
pcib0: possible interrupts:  21
pcib0: slot 16 INTB routed to irq 21 via \\_SB_.PCI0.ALKB
pcib0: possible interrupts:  21
pcib0: slot 16 INTB routed to irq 21 via \\_SB_.PCI0.ALKB
pcib0: possible interrupts:  21
pcib0: slot 16 INTC routed to irq 21 via \\_SB_.PCI0.ALKB
pcib0: possible interrupts:  22
pcib0: slot 17 INTC routed to irq 22 via \\_SB_.PCI0.ALKC
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xb000-0xb0ff mem 0xeb000000-0xeb000fff irq 17 at device 10.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
fwohci0: <VIA VT6306> port 0xb400-0xb47f mem 0xeb001000-0xeb0017ff irq 16 at device 14.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:40:ca:07:01:06:4a:fc
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:40:ca:06:4a:fc
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <VIA 8237 SATA150 controller> port 0xcc00-0xccff,0xc800-0xc80f,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb807 irq 20 at devi
ce 15.0 on pci0
atapci0: [MPSAFE]
ata2: at 0xb800 on atapci0
ata2: [MPSAFE]
ata3: at 0xc000 on atapci0
ata3: [MPSAFE]
atapci1: <VIA 8237 UDMA133 controller> port 0xd000-0xd00f at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 21 at device 16.3 on pci0
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8233X> port 0xe400-0xe4ff irq 22 at device 17.5 on pci0
pcm0: <Avance Logic ALC655 AC97 Codec>
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xeb003000-0xeb0030ff irq 17 at device 19.0 on pci0
rl0: Ethernet address: 00:40:ca:6c:96:c8
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
orm0: <Option ROM> at iomem 0xc0000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1999785383 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xffffff001e0bf6a0
ad0: 152627MB <WDC WD1600JB-00EVA0> [310101/16/63] at ata0-master UDMA100
acd0: CDRW <52X32X52 CD-RW 1.04 20031128> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
GEOM: create disk da0 dp=0xffffff0000d11468
GEOM: create disk da1 dp=0xffffff0000d11068
da0 at ahc0 bus 0 target 0 lun 0
da0: <FUJITSU MAJ3182M SUN18G 0804> Fixed Direct Access SCSI-2 device 
da0: 80.000MB/s transfers (40.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <FUJITSU MAJ3182M SUN18G 0804> Fixed Direct Access SCSI-2 device 
da1: 80.000MB/s transfers (40.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da1: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C)
Mounting root from ufs:/dev/ad0s1a