SMP issues on K8S Pro S2882G3NR

[Andrew Houghton]

Peter Losher wrote:

>>We have been testing this fine, Upgrade your BIOS to version 2.00 it's
>>the only one that works properly. (Thanks tyan) see the list.
>>    
>>
>
>I am looking at Tyan's FTP site in the bios_beta dir and don't find a beta
>2.0 BIOS for the S2882 - Can you provide a link to where you found it on
>their site.   Thanks!
>
>Best Wishes - Peter (Suffering the same SMP issues as the rest of you)
>  
>

I've been having the same issues with getting a recent kernel to boot 
SMP on my K8S Pro.

Tyan posted BIOS v. 2.01 on their site today 
(http://www.tyan.com/support/html/b_s2882.html).  I was hoping this 
would fix the issue, but it hasn't -- the system still only sees one 
CPU.  This is with a completely GENERIC kernel and world, rebuilt 
today.  I've tried both with and without the "ACPI 2.0" support option 
in the BIOS (but always with ACPI enabled). 

Anyone have any suggestions?  I can fall back to i386 SMP, but it seems 
at least some folks on this list have this working, and it would be 
great to know why it isn't for me.

I'm not sure what kind of info would help, but I'll start with my dmesg 
output:

$ uname -a
FreeBSD odin.impactonline.org 5.2-CURRENT FreeBSD 5.2-CURRENT #0: Mon 
Apr 19 18:56:10 PDT 2004     
root at odin.impactonline.org:/usr/obj/usr/src/sys/GENERIC  amd64
$ dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Mon Apr 19 18:56:10 PDT 2004
    root at odin.impactonline.org:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8090d000.
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 246 (1991.45-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0xf58  Stepping = 8
  
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow!+,3DNow!>
real memory  = 2147418112 (2047 MB)
avail memory = 2061258752 (1965 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
random: <entropy source, Software, Yarrow>
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [GIANT-LOCKED]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib1
ohci0: <OHCI (generic) USB controller> mem 0xfeafc000-0xfeafcfff irq 19 
at device 0.0 on pci3
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeafc000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfeafd000-0xfeafdfff irq 19 
at device 0.1 on pci3
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeafd000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiI 3114 SATA150 controller> port 
0xa800-0xa80f,0xac00-0xac03,0xb000-0xb007,0xb400-0xb403,0xbc00-0xbc07 
mem 0xfeafec00-0xfeafefff irq 19 at device 5.0 on pci3
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xa800
atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfeafec00
ata2: at 0xfeafec00 on atapci0
ata3: at 0xfeafec00 on atapci0
ata4: at 0xfeafec00 on atapci0
ata5: at 0xfeafec00 on atapci0
pci3: <display, VGA> at device 6.0 (no driver attached)
fxp0: <Intel 82551 Pro/100 Ethernet> port 0xa400-0xa43f mem 
0xfeaa0000-0xfeabffff,0xfeafb000-0xfeafbfff irq 18 at device 8.0 on pci3
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeafb000
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:e0:81:29:c4:e2
fxp0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <AMD 8111 UDMA133 controller> port 0xffa0-0xffaf at device 7.1 
on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
atapci1: Lazy allocation of 0x8 bytes rid 0x10 type 4 at 0x1f0
atapci1: Lazy allocation of 0x4 bytes rid 0x14 type 4 at 0x3f4
ata0: at 0x1f0 irq 14 on atapci1
atapci1: Lazy allocation of 0x8 bytes rid 0x18 type 4 at 0x170
atapci1: Lazy allocation of 0x4 bytes rid 0x1c type 4 at 0x374
ata1: at 0x170 irq 15 on atapci1
pci0: <serial bus, SMBus> at device 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem 
0xfc8b0000-0xfc8bffff,0xfc8c0000-0xfc8cffff irq 24 at device 9.0 on pci2
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfc8c0000
miibus1: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus1
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto
bge0: Ethernet address: 00:e0:81:29:c5:0c
bge0: [GIANT-LOCKED]
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem 
0xfc8e0000-0xfc8effff,0xfc8f0000-0xfc8fffff irq 25 at device 9.1 on pci2
bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfc8f0000
miibus2: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus2
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto
bge1: Ethernet address: 00:e0:81:29:c5:0d
bge1: [GIANT-LOCKED]
pci0: <base peripheral, interrupt controller> at device 10.1 (no driver 
attached)
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci1: <ACPI PCI bus> on pcib3
pci0: <base peripheral, interrupt controller> at device 11.1 (no driver 
attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: cannot reserve I/O port range (1 ports)
fdc0: cannot reserve I/O port range (1 ports)
cpu0 on motherboard
cpu1 on motherboard
orm0: <Option ROMs> at iomem 0xc8000-0xcc7ff,0xc0000-0xc7fff on isa0
fdc0: cannot reserve I/O port range (6 ports)
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 0.976 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acd0: CDROM <MATSHITA CR-177> at ata1-master PIO4
ad4: 35304MB <WDC WD360GD-00FNA0> [71730/16/63] at ata2-master SATA150
ad6: 35304MB <WDC WD360GD-00FNA0> [71730/16/63] at ata3-master SATA150
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad4s1a
$

Thanks,

Andrew