MiataGL doesn't boot in 5.4-RC2
Wilko Bulte
wb at freebie.xs4all.nl
Fri Apr 15 14:05:41 PDT 2005
On Fri, Apr 15, 2005 at 12:10:29PM -0400, John Baldwin wrote..
>
> On Apr 15, 2005, at 6:39 AM, Bernd Walter wrote:
>
> >On Fri, Apr 15, 2005 at 02:23:28AM +0200, Victor Balada Diaz wrote:
> >>On Thu, Apr 14, 2005 at 08:22:17PM +0200, Wilko Bulte wrote:
> >>>But I noticed something else in the system of the original poster:
> >>>a TGA2 display card. Any chance you can give it a try without that
> >>>one
> >>>please? There has been some fun with the various TGA display
> >>>adapters in
> >>>the past.
> >>
> >>I tried without the TGA card and it hangs in the same place. I can
> >>provide
> >>shell if needed.
> >
> >It has the card already done acording to boot log:
> > pci0: <display, VGA> at device 11.0 (no driver attached)
> >The symptoms are the same as described by José M. Fandiño in
> ><42444922.794080FB at fadesa.es> a few days ago.
> >Next in boot order should be ata access.
> >In José's case removing ata from kernel helped to boot, but he has
> >devices attached that he needs.
> >
> >Victors machine has the IDE part of the Cypress chip probed the
> >following:
> >found-> vendor=0x1080, dev=0xc693, revid=0x00
> > bus=0, slot=7, func=1
> > class=01-01-80, hdrtype=0x00, mfdev=1
> > cmdreg=0x0045, statreg=0x0280, cachelnsz=0 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > intpin=a, irq=238
> > map[10]: type 4, range 32, base 00000170, size 3, enabled
> > map[14]: type 4, range 32, base 00000374, size 2, enabled
> > map[20]: type 1, range 32, base 80140000, size 16, memory
> >disabled
> >found-> vendor=0x1080, dev=0xc693, revid=0x00
> > bus=0, slot=7, func=2
> > class=01-01-00, hdrtype=0x00, mfdev=1
> > cmdreg=0x0045, statreg=0x0280, cachelnsz=0 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > intpin=b, irq=239
> > map[10]: type 1, range 32, base 80158000, size 12, enabled
> >
> >You can see a mapping at 0x170 of 8 Bytes, but the second channel
> >has no mapping at 0x1f0.
> >Wilko, can you compare this with your PC164SX?
> >Would be interesting if removing the ata hints will help, as they are
> >the one refering to the ISA compatibility adresses.
>
> Our PCI code in 5.x and newer makes certain assumptions about resources
> for ATA controllers as well, so you may want to forward this on to
> Soren and Warner to see if they have any ideas.
Attached a boot -v of 5.4-RC2 on my 164sx. But note that it is a SCSI
system, no ATA stuff attached.
--
Wilko Bulte wilko at FreeBSD.org
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RC2 #0: Sun Apr 10 21:51:00 UTC 2005
root at ds10.freebie.xs4all.nl:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc00009e4000.
EB164
Digital AlphaPC 164SX 533 MHz, 531MHz
8192 byte page size, 1 processor.
CPU: PCA56 (21164PC) major=9 minor=2 extensions=0x101<BWX,MVI>
OSF PAL rev: 0x1000600020117
real memory = 1071554560 (1021 MB)
Physical memory chunk(s):
0x00a04000 - 0x3f0b5fff, 1047207936 bytes (127833 pages)
avail memory = 1040318464 (992 MB)
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
cia0: <2117x Core Logic chipset>
cia0: Pyxis, pass 1
cia0: extended capabilities: 1<BWEN>
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 1, range 32, base 82240000, size 12, enabled
map[14]: type 4, range 32, base 00010100, size 6, enabled
map[18]: type 1, range 32, base 82000000, size 20, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 64, base 82200000, size 16, enabled
found-> vendor=0x14e4, dev=0x1645, revid=0x15
bus=0, slot=7, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
found-> vendor=0x1080, dev=0xc693, revid=0x00
bus=0, slot=8, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00010140, size 4, enabled
found-> vendor=0x1080, dev=0xc693, revid=0x00
bus=0, slot=8, func=1
class=01-01-80, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 00000170, size 3, enabled
map[14]: type 4, range 32, base 00000374, size 2, enabled
map[20]: type 1, range 32, base 82220000, size 16, memory disabled
found-> vendor=0x1080, dev=0xc693, revid=0x00
bus=0, slot=8, func=2
class=01-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
map[10]: type 1, range 32, base 82241000, size 12, enabled
found-> vendor=0x1080, dev=0xc693, revid=0x00
bus=0, slot=8, func=3
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 00010000, size 8, enabled
map[14]: type 1, range 32, base 82242000, size 12, enabled
found-> vendor=0x9004, dev=0x8178, revid=0x01
bus=0, slot=9, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=8
powerspec 1 supports D0 D3 current D0
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x10100-0x1013f mem 0x82000000-0x820fffff,0x82240000-0x82240fff irq 9 at device 5.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x82240000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 000e 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:d0:b7:55:5f:ae
fxp0: interrupting at CIA irq 9
fxp0: [MPSAFE]
pci0: <network, ethernet> at device 7.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 8.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Cypress 82C693 ATA controller> port 0x10140-0x1014f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 8.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x10140
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ata0: interrupting at ISA irq 14
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: interrupting at ISA irq 15
ata1: [MPSAFE]
atapci1: <GENERIC ATA controller> port 0x377-0x37a,0x170-0x177 mem 0x82220000-0x8222ffff at device 8.2 on pci0
atapci1: failed: rid 0x20 is memory, requested 4
atapci1: unable to map interrupt
ata2: channel #0 on atapci1
device_attach: ata2 attach returned 6
ohci0: <OHCI (generic) USB controller> mem 0x82241000-0x82241fff at device 8.3 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x82241000
ohci0: Could not allocate irq
device_attach: ohci0 attach returned 6
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x10000-0x100ff mem 0x82242000-0x82242fff irq 8 at device 9.0 on pci0
ahc0: Defaulting to MEMIO off
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x10000
ahc0: Enabling 39Bit Addressing
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable not present, internal 68 cable is present
ahc0: external cable not present
ahc0: BIOS eeprom is present
ahc0: High byte termination Enabled
ahc0: Low byte termination Enabled
ahc0: Downloading Sequencer Program... 449 instructions downloaded
ahc0: Features 0x10005, Bugs 0x11, Flags 0x29485540
ahc0: interrupting at CIA irq 8
ahc0: [GIANT-LOCKED]
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
atkbd0: interrupting at ISA irq 1
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0021
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
fdc0: ic_type 90 part_id 80
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 80
fdc0: interrupting at ISA irq 6
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
Calibrating clock(s) ... PCC clock: 533174631 Hz (firmware 531914893 Hz)
i8254 clock: 1190793 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sc0: no video adapter found.
sc0: <System console> failed to probe on isa0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
vga0: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
procfs registered
Timecounter "i8254" frequency 1193182 Hz quality 0
Timecounter "alpha" frequency 533174631 Hz quality 800
Timecounters tick every 0.976 msec
lo0: bpf attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
ahc0: Selection Timeout on A:8. 0 SCBs aborted
ahc0: Selection Timeout on A:9. 0 SCBs aborted
ahc0: Selection Timeout on A:13. 0 SCBs aborted
ahc0: Selection Timeout on A:3. 0 SCBs aborted
ahc0: Selection Timeout on A:4. 0 SCBs aborted
ahc0: Selection Timeout on A:10. 0 SCBs aborted
ahc0: Selection Timeout on A:11. 0 SCBs aborted
ahc0: Selection Timeout on A:12. 0 SCBs aborted
ahc0: Selection Timeout on A:14. 0 SCBs aborted
ahc0: Selection Timeout on A:15. 0 SCBs aborted
ahc0: Selection Timeout on A:2. 0 SCBs aborted
ahc0: Selection Timeout on A:5. 0 SCBs aborted
ahc0: Selection Timeout on A:6. 0 SCBs aborted
(probe0:ahc0:0:0:0): Retrying Command
(probe1:ahc0:0:1:0): Retrying Command
(probe0:ahc0:0:0:0): error 22
(probe0:ahc0:0:0:0): Unretryable Error
(ahc0:A:0:0): Sending SDTR period c, offset f
(ahc0:A:0:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
ahc0: target 0 synchronous at 10.0MHz, offset = 0xf
(ahc0:A:0:0): Sending SDTR period 19, offset f
(ahc0:A:0:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
(ahc0:A:1:0): Sending WDTR 1
(ahc0:A:1:0): Received WDTR 1 filtered to 1
ahc0: target 1 using 16bit transfers
(ahc0:A:1:0): Sending SDTR period c, offset 8
(ahc0:A:1:0): Received SDTR period c, offset 8
Filtered to period c, offset 8
ahc0: target 1 synchronous at 20.0MHz, offset = 0x8
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <TOSHIBA CD-ROM XM-6201TA 1206> Removable CD-ROM SCSI-2 device
pass0: 10.000MB/s transfers (10.000MHz, offset 15)
pass1 at ahc0 bus 0 target 1 lun 0
pass1: <IBM DDRS-39130W S92A> Fixed Direct Access SCSI-2 device
pass1: Serial Number REF38392
pass1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
(ahc0:A:0:0): Sending SDTR period 19, offset f
GEOM: new disk cd0
GEOM: new disk da0
(ahc0:A:0:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
(cd0:ahc0:0:0:0): error 6
(cd0:ahc0:0:0:0): Unretryable Error
cd0 at ahc0 bus 0 target 0 lun 0
cd0: <TOSHIBA CD-ROM XM-6201TA 1206> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 1 lun 0
da0: <IBM DDRS-39130W S92A> Fixed Direct Access SCSI-2 device
da0: Serial Number REF38392
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
(ahc0:A:0:0): Sending SDTR period 19, offset f
(ahc0:A:0:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
(cd0:ahc0:0:0:0): error 6
(cd0:ahc0:0:0:0): Unretryable Error
(ahc0:A:0:0): Sending SDTR period 19, offset f
(ahc0:A:0:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
(cd0:ahc0:0:0:0): error 6
(cd0:ahc0:0:0:0): Unretryable Error
GEOM: Configure da0a, start 0 length 268435456 end 268435455
GEOM: Configure da0b, start 268435456 length 2143109120 end 2411544575
GEOM: Configure da0c, start 0 length 9139200000 end 9139199999
GEOM: Configure da0d, start 2411544576 length 268435456 end 2679980031
GEOM: Configure da0e, start 2679980032 length 268435456 end 2948415487
GEOM: Configure da0f, start 2948415488 length 6190784512 end 9139199999
Mounting root from ufs:/dev/da0a
start_init: trying /sbin/init
More information about the freebsd-alpha
mailing list