XFree on a UP2000
Peter Larkowski
peter at larkowski.net
Sun Oct 12 11:29:42 PDT 2003
Hi again, for those that have had this problem in the past, I thought a
solution posted to the mailing list would be useful. It was suggested
to me that I should build XFree86 witht the int10 module disabled. In
trying to figure out how to do this, I stumbled across the changelog
for the 4.3.99 (4.4.0) XFree86 pre releases and it seems there has been
a problem with int10 on non-linux, non-x86 (ie, FreeBSD/alpha) that is
now fixed. I installed the XFree86-4-Server-snap port which is version
4.3.99.12_2 right now (required disabling DRI on 5.X, seems to build
fine on 4.X). XFree86 -configure caused the on-board scsi to freak
out, but once I gave it a config file, it works fine.
-p
On Thursday, October 9, 2003, at 06:55 PM, Peter Larkowski wrote:
> Hi everyone. This question has been asked before by others, but never
> with any answers, so I thought I'd try again :) I'm having trouble
> getting XFree4 running on my UP2000(264dp). It seems to switch to vt9
> and then it sits and takes 100% cpu until I ssh in and kill X.
> Afterward, I can switch back to whatever virtual terminal I want. It
> appears to die after the pci bus scan. XFree86 -scanpci works and
> exits properly. I've tried several cards (S3 Virge and matrox) in
> several pci slots. It behaves the same on all versions of X 4.1.0 to
> 4.3.0, and all versions of FreeBSD 4.7 to -CURRENT from a couple
> nights ago. XFree3.3.6 works however, but lacks lots of nice features
>
> Here's my XFree86.0.log: (note, I disabled scanning the 2nd pci bus in
> the X source because I read on a debian-alpha mailing list that X had
> trouble scanning the 2nd bus on this board, but it didn't alter the
> behavior except that the 2nd bus is no longer scanned :)
>
> Thanks for any advice you can give.
>
> ------------------------------------------------
>
>
> XFree86 Version 4.3.0
> Release Date: 27 February 2003
> X Protocol Version 11, Revision 0, Release 6.6
> Build Operating System: FreeBSD 5.1 alpha [ELF]
> Build Date: 09 October 2003
> Before reporting problems, check http://www.XFree86.Org/
> to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/XFree86.0.log", Time: Thu Oct 9 18:33:57 2003
> (==) Using config file: "/etc/X11/XF86Config"
> (==) ServerLayout "Simple Layout"
> (**) |-->Screen "Screen 1" (0)
> (**) | |-->Monitor "sony"
> (**) | |-->Device "g450"
> (**) |-->Input Device "Mouse1"
> (**) |-->Input Device "Keyboard1"
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xfree86"
> (**) XKB: rules: "xfree86"
> (**) Option "XkbModel" "pc101"
> (**) XKB: model: "pc101"
> (**) Option "XkbLayout" "us"
> (**) XKB: layout: "us"
> (==) Keyboard: CustomKeycode disabled
> (WW) `fonts.dir' not found (or not valid) in
> "/usr/X11R6/lib/X11/fonts/misc/".
> Entry deleted from font path.
> (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/misc/").
> (WW) `fonts.dir' not found (or not valid) in
> "/usr/X11R6/lib/X11/fonts/75dpi/".
> Entry deleted from font path.
> (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/75dpi/").
> (WW) `fonts.dir' not found (or not valid) in
> "/usr/X11R6/lib/X11/fonts/100dpi/".
> Entry deleted from font path.
> (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi/").
> (WW) `fonts.dir' not found (or not valid) in
> "/usr/X11R6/lib/X11/fonts/Type1/".
> Entry deleted from font path.
> (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Type1/").
> (WW) `fonts.dir' not found (or not valid) in
> "/usr/X11R6/lib/X11/fonts/Speedo/".
> Entry deleted from font path.
> (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Speedo/").
> (WW) `fonts.dir' not found (or not valid) in
> "/usr/X11R6/lib/X11/fonts/75dpi/".
> Entry deleted from font path.
> (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/75dpi/").
> (WW) `fonts.dir' not found (or not valid) in
> "/usr/X11R6/lib/X11/fonts/100dpi/".
> Entry deleted from font path.
> (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi/").
> (WW) The directory "/usr/X11R6/lib/X11/fonts/TrueType/" does not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/X11R6/lib/X11/fonts/TrueType/winfonts/" does
> not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/X11R6/lib/X11/fonts/TrueType/grimmace/" does
> not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/X11R6/lib/X11/fonts/freefont/" does not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/X11R6/lib/X11/fonts/sharefont/" does not
> exist.
> Entry deleted from font path.
> (WW) The directory "/usr/X11R6/lib/X11/fonts/mozilla/" does not exist.
> Entry deleted from font path.
> (WW) FontPath is completely invalid. Using compiled-in default.
> (==) FontPath set to
> "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Spee
> do/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/
> usr/X11R6/lib
> /X11/fonts/100dpi/"
> (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (**) Option "BlankTime" "0"
> (--) Using syscons driver with X support (version 16777218.0)
> (--) using VT number 9
>
> Couldn't open RGB_DB '/usr/X11R6/lib/X11/rgb'
> (II) Module ABI versions:
> XFree86 ANSI C Emulation: 0.2
> XFree86 Video Driver: 0.6
> XFree86 XInput driver : 0.4
> XFree86 Server Extension : 0.2
> XFree86 Font Renderer : 0.4
> (II) Loader running on freebsd
> (II) LoadModule: "bitmap"
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
> compiled for 4.3.0, module version = 1.0.0
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.4
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
> compiled for 4.3.0, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.6
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:05:0: chip 1080,c693 card 0000,0000 rev 00 class 06,01,00
> hdr 80
> (II) PCI: 00:05:1: chip 1080,c693 card 0000,0000 rev 00 class 01,01,80
> hdr 80
> (II) PCI: 00:05:2: chip 1080,c693 card 0000,0000 rev 00 class 01,01,00
> hdr 80
> (II) PCI: 00:05:3: chip 1080,c693 card 0000,0000 rev 00 class 0c,03,10
> hdr 80
> (II) PCI: 00:06:0: chip 9005,001f card 9005,000f rev 01 class 01,00,00
> hdr 00
> (II) PCI: 00:07:0: chip 102b,051a card 102b,1000 rev 03 class 03,00,00
> hdr 00
> (II) PCI: 00:09:0: chip 1011,0009 card 10b8,2001 rev 20 class 02,00,00
> hdr 00
> (II) PCI: End of PCI scan
> (II) PCI-to-ISA bridge:
> (II) Bus -1: bridge is at (0:5:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is
> set)
> (II) Host-to-PCI bridge:
> (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x0008 (VGA_EN is
> set)
> (II) Bus 0 I/O range:
> [0] -1 0 0x00000000 - 0xffffffff (0x100000000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> [0] -1 0 0x80000000 - 0xffffffff (0x80000000) MX[B]
> (II) Bus 0 prefetchable memory range:
> [0] -1 0 0x80000000 - 0xffffffff (0x80000000) MX[B]
>
>
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> Peter Larkowski
> mailto: peter at larkowski.net
>
> _______________________________________________
> freebsd-alpha at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-alpha
> To unsubscribe, send any mail to
> "freebsd-alpha-unsubscribe at freebsd.org"
>
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Peter Larkowski
mailto: peter at larkowski.net
More information about the freebsd-alpha
mailing list