4.9R on ES40 ?
Bernd Walter
ticso at cicely12.cicely.de
Fri Nov 28 11:45:06 PST 2003
On Fri, Nov 28, 2003 at 08:09:17PM +0100, Wilko Bulte wrote:
> Hi there,
>
> Has anyone tried 4.9R install on an ES40 machine?
>
> Machines equipped with sym(4) driven cards spit out
> nothing but "SCSI Bus Reset" errors. Something to do with
> multi-hose machines? Or maybe the bridge chip on the dual-chip
> sym(4) cards? Or a combination of both ;) ?
Hose numbers get lost behind bridges :(
You need to have all bridged cards at the same hose, or maybe even
hose 0.
> A machine with an isp(4) driven card froze during sysinstall
> with a weird usb error.
I'm not surprised with this if you have an usb controller on another
hose.
> I can dig up the log of that stuff, for now I'm wondering if
> others have seen this too
I've seen something similar on rawhide with multiple bridged cards.
Another issue might be interrupt routing, but I think that's not a
problem on ES40.
--
B.Walter BWCT http://www.bwct.de
ticso at bwct.de info at bwct.de
More information about the freebsd-alpha
mailing list