problem with UDMA mode on XP1000

[Riccardo.Veraldi at fi.infn.it]

I Reply to myself

1) bad ATA100 cable
2) hard drive is dieing


any other ideas?
thanks

Rick


On Mon, 14 Apr 2003 Riccardo.Veraldi at fi.infn.it wrote:

>
> hello,
> FreeBSD-4.8, XP1000.
> I installed a FAStrak 100:
>
> atapci2: <Promise TX2 ATA100 controller> port
> 0x1010-0x101f,0x1034-0x1037,0x1028-0x102f,0x1030-0x1033,0x1020-0x1027 mem
> 0x1020000-0x102ffff irq 32 at device 13.0 on pci0
>
> and I Attached a UDMA disk:
>
> ad0: 38172MB <QUANTUM FIREBALLP AS40.0> [77557/16/63] at ata3-master
> UDMA100
>
> the problem is that I got often these messages:
>
> ad0: UDMA ICRC error reading fsbn 78177393 of 0-3 (ad0 bn 78177393; cn
> 77556 tn 15 sn 0) retrying
>
> and often it reverts to PIO mode...
>
> anyone has hints how I could fix this problem?
> could it be given by the fact that I isntalled the PCI card on the 64-bit
> slot?
> thanks
>
> Rick
>
>
> _______________________________________________
> freebsd-alpha at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-alpha
> To unsubscribe, send any mail to "freebsd-alpha-unsubscribe at freebsd.org"
>