ACPI issues with PC engines APU beta board
Mike Tancsa
mike at sentex.net
Tue Mar 11 14:51:15 UTC 2014
On 3/10/2014 4:03 PM, Larry Baird wrote:
>>
>> 10.0-STABLE FreeBSD 10.0-STABLE #2 r262153 i386
> You will need to either update the BIOS or patch FreeBSD 10. The
> patch associated with:
> http://svnweb.freebsd.org/base?view=revision&sortby=date&revision=261243
> applies cleanly to FreeBSD 10. The latest BIOS from PC engines for the APU
> board is very noisy when it boots. Hopefully the code change will get MFCed
> now that the APU board is generally available:
> http://www.pcengines.ch/apu.htm
>
With the patch, all seems to work well so far. I updated to RELENG10
r262980M i386. I can now attach the watchdog, and it indeed works!
Full dmesg of the pcengines APU attached for the archives.
---Mike
--
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike at sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
-------------- next part --------------
FreeBSD alix_2gen.sentex.ca 10.0-STABLE FreeBSD 10.0-STABLE #1 r262980M: Mon Mar 10 16:54:07 EDT 2014 mdtancsa at ich10.sentex.ca:/home/pxe10/usr/obj/home/pxe10/usr/src/sys/GENERIC i386
root at alix_2gen:/usr/home/mdtancsa # cat /var/run/dmesg.boot
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-STABLE #1 r262980M: Mon Mar 10 16:54:07 EDT 2014
mdtancsa at ich10.sentex.ca:/home/pxe10/usr/obj/home/pxe10/usr/src/sys/GENERIC i386
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: AMD G-T40E Processor (1000.02-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x500f20 Family = 0x14 Model = 0x2 Stepping = 0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
TSC: P-state invariant, performance statistics
real memory = 2114297856 (2016 MB)
avail memory = 2052513792 (1957 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <CORE COREBOOT>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd0 at kbdmux0
random: <Software, Yarrow> initialized
module_register_init: MOD_LOAD (vesa, 0xc0f1f940, 0) error 19
acpi0: <CORE COREBOOT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0xfe600000-0xfe600fff,0xfe500000-0xfe503fff at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 00:0d:b9:33:11:c4
pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xfe800000-0xfe800fff,0xfe700000-0xfe703fff at device 0.0 on pci2
re1: Using 1 MSI-X message
re1: ASPM disabled
re1: Chip rev. 0x2c000000
re1: MAC rev. 0x00200000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Ethernet address: 00:0d:b9:33:11:c5
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib3
re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xfea00000-0xfea00fff,0xfe900000-0xfe903fff at device 0.0 on pci3
re2: Using 1 MSI-X message
re2: ASPM disabled
re2: Chip rev. 0x2c000000
re2: MAC rev. 0x00200000
miibus2: <MII bus> on re2
rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2
rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re2: Ethernet address: 00:0d:b9:33:11:c6
ahci0: <ATI IXP700 AHCI SATA controller> port 0x4020-0x4027,0x4040-0x4043,0x4028-0x402f,0x4044-0x4047,0x4000-0x400f mem 0xfeb04000-0xfeb043ff at device 17.0 on pci0
ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb00000-0xfeb00fff at device 18.0 on pci0
usbus0 on ohci0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04400-0xfeb044ff at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb01000-0xfeb01fff at device 19.0 on pci0
usbus2 on ohci1
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04500-0xfeb045ff at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4010-0x401f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib4: failed to allocate initial memory window: 0-0xfffff
pcib4: failed to allocate initial prefetch window: 0-0xfffff
pci0: couldn't attach pci bus
device_attach: pcib4 attach returned 6
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb02000-0xfeb02fff at device 20.5 on pci0
usbus4 on ohci2
pcib4: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci4: <ACPI PCI bus> on pcib4
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb03000-0xfeb03fff at device 22.0 on pci0
usbus5 on ohci3
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04600-0xfeb046ff at device 22.2 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci2
acpi_button0: <Power Button> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xee800-0xeffff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub4: 2 ports with 2 removable, self powered
uhub0: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub5: 4 ports with 4 removable, self powered
uhub6: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
ugen6.2: <Generic> at usbus6
umass0: <Generic Flash Card ReaderWriter, class 0/0, rev 2.01/1.00, addr 2> on usbus6
umass0: SCSI over Bulk-Only; quirks = 0x4001
umass0:6:0:-1: Attached to scbus6
ugen0.2: <APC> at usbus0
ugen0.3: <Conexant> at usbus0
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <Multiple Card Reader 1.00> Removable Direct Access SCSI-4 device
da0: Serial Number 058F63666485
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
Netvsc initializing... SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1000021163 Hz quality 800
Trying to mount root from nfs: []...
NFS ROOT: 10.255.255.1:/home/pxe10
umodem0: <Conexant USB Modem, class 2/0, rev 1.10/1.00, addr 3> on usbus0
umodem0: data interface 1, has CM over data, has no break
amdsbwd0: <AMD SB8xx Watchdog Timer> at iomem 0xfec000f0-0xfec000f3,0xfec000f4-0xfec000f7 on isa0
root at alix_2gen:/usr/home/mdtancsa # usbconfig
ugen0.1: <OHCI root HUB ATI> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen1.1: <EHCI root HUB ATI> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen2.1: <OHCI root HUB ATI> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen3.1: <EHCI root HUB ATI> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen4.1: <OHCI root HUB ATI> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen5.1: <OHCI root HUB ATI> at usbus5, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen6.1: <EHCI root HUB ATI> at usbus6, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen6.2: <Flash Card ReaderWriter Generic> at usbus6, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (100mA)
ugen0.2: <Back-UPS ES 550 FW843.K2 .D USB FWK2 APC> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (2mA)
ugen0.3: <USB Modem Conexant> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA)
root at alix_2gen:/usr/home/mdtancsa # usbconfig
ugen0.1: <OHCI root HUB ATI> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen1.1: <EHCI root HUB ATI> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen2.1: <OHCI root HUB ATI> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen3.1: <EHCI root HUB ATI> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen4.1: <OHCI root HUB ATI> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen5.1: <OHCI root HUB ATI> at usbus5, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen6.1: <EHCI root HUB ATI> at usbus6, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen6.2: <Flash Card ReaderWriter Generic> at usbus6, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (100mA)
ugen0.2: <Back-UPS ES 550 FW843.K2 .D USB FWK2 APC> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (2mA)
ugen0.3: <USB Modem Conexant> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA)
# pciconf -lvbc
hostb0 at pci0:0:0:0: class=0x060000 card=0x15101022 chip=0x15101022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 14h Processor Root Complex'
class = bridge
subclass = HOST-PCI
pcib1 at pci0:0:4:0: class=0x060400 card=0x12341022 chip=0x15121022 rev=0x00 hdr=0x01
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 14h Processor Root Port'
class = bridge
subclass = PCI-PCI
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x1)
speed 2.5(5.0) ASPM L0s/L1(L0s/L1)
cap 05[a0] = MSI supports 1 message, 64 bit
cap 0d[b0] = PCI Bridge card=0x12341022
cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
pcib2 at pci0:0:5:0: class=0x060400 card=0x12341022 chip=0x15131022 rev=0x00 hdr=0x01
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 14h Processor Root Port'
class = bridge
subclass = PCI-PCI
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x1)
speed 2.5(5.0) ASPM L0s/L1(L0s/L1)
cap 05[a0] = MSI supports 1 message, 64 bit
cap 0d[b0] = PCI Bridge card=0x12341022
cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
pcib3 at pci0:0:6:0: class=0x060400 card=0x12341022 chip=0x15141022 rev=0x00 hdr=0x01
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 14h Processor Root Port'
class = bridge
subclass = PCI-PCI
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x1)
speed 2.5(5.0) ASPM L0s/L1(L0s/L1)
cap 05[a0] = MSI supports 1 message, 64 bit
cap 0d[b0] = PCI Bridge card=0x12341022
cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ahci0 at pci0:0:17:0: class=0x010601 card=0x43911002 chip=0x43911002 rev=0x40 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]'
class = mass storage
subclass = SATA
bar [10] = type I/O Port, range 32, base 0x4020, size 8, enabled
bar [14] = type I/O Port, range 32, base 0x4040, size 4, enabled
bar [18] = type I/O Port, range 32, base 0x4028, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0x4044, size 4, enabled
bar [20] = type I/O Port, range 32, base 0x4000, size 16, enabled
bar [24] = type Memory, range 32, base 0xfeb04000, size 1024, enabled
cap 12[70] = SATA Index-Data Pair
cap 13[a4] = PCI Advanced Features: FLR TP
ohci0 at pci0:0:18:0: class=0x0c0310 card=0x43971002 chip=0x43971002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb00000, size 4096, enabled
ehci0 at pci0:0:18:2: class=0x0c0320 card=0x43961002 chip=0x43961002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb04400, size 256, enabled
cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
ohci1 at pci0:0:19:0: class=0x0c0310 card=0x43971002 chip=0x43971002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb01000, size 4096, enabled
ehci1 at pci0:0:19:2: class=0x0c0320 card=0x43961002 chip=0x43961002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb04500, size 256, enabled
cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
none0 at pci0:0:20:0: class=0x0c0500 card=0x15101022 chip=0x43851002 rev=0x42 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SBx00 SMBus Controller'
class = serial bus
subclass = SMBus
atapci0 at pci0:0:20:1: class=0x01018a card=0x439c1002 chip=0x439c1002 rev=0x40 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 IDE Controller'
class = mass storage
subclass = ATA
bar [20] = type I/O Port, range 32, base 0x4010, size 16, enabled
isab0 at pci0:0:20:3: class=0x060100 card=0x439d1002 chip=0x439d1002 rev=0x40 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 LPC host controller'
class = bridge
subclass = PCI-ISA
none1 at pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x40 hdr=0x01
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SBx00 PCI to PCI Bridge'
class = bridge
subclass = PCI-PCI
ohci2 at pci0:0:20:5: class=0x0c0310 card=0x43991002 chip=0x43991002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 USB OHCI2 Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb02000, size 4096, enabled
pcib4 at pci0:0:21:0: class=0x060400 card=0x00001002 chip=0x43a01002 rev=0x00 hdr=0x01
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)'
class = bridge
subclass = PCI-PCI
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 10[58] = PCI-Express 2 root port max data 128(128) link x16(x4)
speed undef(2.5) ASPM disabled(L0s/L1)
cap 05[a0] = MSI supports 1 message, 64 bit
cap 0d[b0] = PCI Bridge card=0x00001002
cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ohci3 at pci0:0:22:0: class=0x0c0310 card=0x43971002 chip=0x43971002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb03000, size 4096, enabled
ehci2 at pci0:0:22:2: class=0x0c0320 card=0x43961002 chip=0x43961002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb04600, size 256, enabled
cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
hostb1 at pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x17001022 rev=0x43 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 0'
class = bridge
subclass = HOST-PCI
hostb2 at pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x17011022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 1'
class = bridge
subclass = HOST-PCI
hostb3 at pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x17021022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 2'
class = bridge
subclass = HOST-PCI
hostb4 at pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x17031022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 3'
class = bridge
subclass = HOST-PCI
cap 0f[f0] = unknown
hostb5 at pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x17041022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 4'
class = bridge
subclass = HOST-PCI
hostb6 at pci0:0:24:5: class=0x060000 card=0x00000000 chip=0x17181022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 6'
class = bridge
subclass = HOST-PCI
hostb7 at pci0:0:24:6: class=0x060000 card=0x00000000 chip=0x17161022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 5'
class = bridge
subclass = HOST-PCI
hostb8 at pci0:0:24:7: class=0x060000 card=0x00000000 chip=0x17191022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 7'
class = bridge
subclass = HOST-PCI
re0 at pci0:1:0:0: class=0x020000 card=0x012310ec chip=0x816810ec rev=0x06 hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
class = network
subclass = ethernet
bar [10] = type I/O Port, range 32, base 0x1000, size 256, enabled
bar [18] = type Memory, range 64, base 0xfe600000, size 4096, enabled
bar [20] = type Prefetchable Memory, range 64, base 0xfe500000, size 16384, enabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit
cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1(x1)
speed 2.5(2.5) ASPM disabled(L0s/L1)
cap 11[b0] = MSI-X supports 4 messages, enabled
Table in map 0x20[0x0], PBA in map 0x20[0x800]
cap 03[d0] = VPD
re1 at pci0:2:0:0: class=0x020000 card=0x012310ec chip=0x816810ec rev=0x06 hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
class = network
subclass = ethernet
bar [10] = type I/O Port, range 32, base 0x2000, size 256, enabled
bar [18] = type Memory, range 64, base 0xfe800000, size 4096, enabled
bar [20] = type Prefetchable Memory, range 64, base 0xfe700000, size 16384, enabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit
cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1(x1)
speed 2.5(2.5) ASPM disabled(L0s/L1)
cap 11[b0] = MSI-X supports 4 messages, enabled
Table in map 0x20[0x0], PBA in map 0x20[0x800]
cap 03[d0] = VPD
re2 at pci0:3:0:0: class=0x020000 card=0x012310ec chip=0x816810ec rev=0x06 hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
class = network
subclass = ethernet
bar [10] = type I/O Port, range 32, base 0x3000, size 256, enabled
bar [18] = type Memory, range 64, base 0xfea00000, size 4096, enabled
bar [20] = type Prefetchable Memory, range 64, base 0xfe900000, size 16384, enabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit
cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1(x1)
speed 2.5(2.5) ASPM disabled(L0s/L1)
cap 11[b0] = MSI-X supports 4 messages, enabled
Table in map 0x20[0x0], PBA in map 0x20[0x800]
cap 03[d0] = VPD
More information about the freebsd-acpi
mailing list