Power OFF button on very old motherboard with FreeBSD 7.2
John Baldwin
jhb at freebsd.org
Mon May 3 14:40:24 UTC 2010
On Sunday 02 May 2010 9:12:15 pm newuse at qip.ru wrote:
> Hallow, I am new in any mailing lists and I unfortunately don't know how to
post as a followup :((
> But ther is an error in dump:
> # acpidump -t
> acpidump: Can't find ACPI information
>
> I think it is because the dump is not supported by my kernel :(
Hmm, does acpidump work under 4.x? We have to be able to find the ACPI tables
to support soft-off via the power button.
> On Friday 30 April 2010 2:22:09 pm newuse at qip.ru wrote:
> > Can you try booting with 'hint.apic.0.disabled=1' set in loader.conf?
Also,
> > if you could obtain a full dmesg that would be helpful.
>
> Can you please get the output of acpidump -t and post it to the mailing list
> as a followup?
>
> > --
> > John Baldwin
> >
> > Thank you, I add "hint.apic.0.disabled=1" (without "") to the end of
> loader.conf, now it looks like:
> > acpi_load="YES"
> > apm_load="YES"
> > alias_ftp_load="YES"
> > hint.apic.0.disabled=1
> >
> > my fulll DMESG:
> > # dmesg
> > Copyright (c) 1992-2009 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> > The Regents of the University of California. All rights reserved.
> > FreeBSD is a registered trademark of The FreeBSD Foundation.
> > FreeBSD 7.2-RELEASE #10: Thu Mar 25 05:42:27 MSK 2010
> > root at NewUse.vesnet.net:/usr/obj/usr/src/sys/MYKNL
> > Timecounter "i8254" frequency 1193182 Hz quality 0
> > CPU: Pentium II/Pentium II Xeon/Celeron (350.80-MHz 686-class CPU)
> > Origin = "GenuineIntel" Id = 0x652 Stepping = 2
> > Features=0x183f9ff
> > real memory = 134217728 (128 MB)
> > avail memory = 121806848 (116 MB)
> > kbd1 at kbdmux0
> > ACPI Error (tbxfroot-0308): A valid RSDP was not found [20070320]
> > ACPI: Table initialisation failed: AE_NOT_FOUND
> > ACPI: Try disabling either ACPI or apic support.
> > pcib0: pcibus 0 on motherboard
> > pir0: on motherboard
> > pci0: on pcib0
> > agp0: on hostb0
> > pcib1: at device 1.0 on pci0
> > pci1: on pcib1
> > isab0: at device 7.0 on pci0
> > isa0: on isab0
> > atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device
> 7.1 on pci0
> > ata0: on atapci0
> > ata0: [ITHREAD]
> > ata1: on atapci0
> > ata1: [ITHREAD]
> > uhci0: port 0xde00-0xde1f irq 11 at device 7.2 on pci0
> > uhci0: [GIANT-LOCKED]
> > uhci0: [ITHREAD]
> > usb0: on uhci0
> > usb0: USB revision 1.0
> > uhub0: on usb0
> > uhub0: 2 ports with 2 removable, self powered
> > intsmb0: port 0x440-0x44f at device 7.3 on pci0
> > intsmb0: intr IRQ 9 enabled revision 0
> > intsmb0: [GIANT-LOCKED]
> > intsmb0: [ITHREAD]
> > intsmb0: PM I/O mapped 400
> > smbus0: on intsmb0
> > smb0: on smbus0
> > pcm0: port 0xdc00-0xdc3f irq 11 at device 14.0 on pci0
> > pcm0:
> > pcm0: [ITHREAD]
> > pcm0:
> > rl0: port 0xda00-0xdaff mem 0xefffbf00-0xefffbfff irq 10 at device 16.0
on
> pci0
> > miibus0: on rl0
> > rlphy0: PHY 0 on miibus0
> > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> > rl0: Ethernet address: 00:80:48:38:3a:3d
> > rl0: [ITHREAD]
> > rl1: port 0xd800-0xd8ff mem 0xefffbe00-0xefffbeff irq 9 at device 18.0 on
> pci0
> > miibus1: on rl1
> > rlphy1: PHY 0 on miibus1
> > rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> > rl1: Ethernet address: 00:18:e7:09:0f:09
> > rl1: [ITHREAD]
> > rl2: port 0xd600-0xd6ff mem 0xefffbd00-0xefffbdff irq 11 at device 20.0
on
> pci0
> > miibus2: on rl2
> > rlphy2: PHY 0 on miibus2
> > rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> > rl2: Ethernet address: 00:11:95:5b:8e:7a
> > rl2: [ITHREAD]
> > cpu0 on motherboard
> > pmtimer0 on isa0
> > atkbdc0: at port 0x60,0x64 on isa0
> > atkbd0: irq 1 on atkbdc0
> > kbd0 at atkbd0
> > atkbd0: [GIANT-LOCKED]
> > atkbd0: [ITHREAD]
> > fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> > fdc0: [FILTER]
> > fd0:
> >
>
> --
> John Baldwin
>
>
>
--
John Baldwin
More information about the freebsd-acpi
mailing list