[bugs ACPI] Toshiba Satellite L20-181 Series PSL2XE

Thu May 11 09:14:29 UTC 2006

Hello. At me a problem with installation FreeBSD 6.0 RELEASE on laptope which it is specified in a theme. 
I send you dmeag loadings after installation, and it is obviously visible that a problem in ACPI. 
Prompt as it to overcome. To me it is very important. 
Thanks in advance for the help.
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
    root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <PTLTD  	 APIC  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) M processor         1.60GHz (1596.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
  Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory  = 199884800 (190 MB)
avail memory = 186073088 (177 MB)
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 2.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD   RSDT> on motherboard
    ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND
SearchNode 0xc140c0a0 StartNode 0xc140c0a0 ReturnNode 0
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 0 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 0 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 0 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 0 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 0 on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xd0000000-0xd0000fff irq 19 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xd0001000-0xd0001fff irq 19 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0002000-0xd0002fff irq 19 at device 19.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: (0x1002) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f irq 16 at device 20.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci9: <ACPI PCI bus> on pcib2
cbb0: <TI1510 PCI-CardBus Bridge> at device 1.0 on pci9
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xd0200000-0xd02000ff irq 21 at device 2.0 on pci9
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:c0:9f:ee:ce:c3
pci0: <multimedia, audio> at device 20.5 (no driver attached)
pci0: <simple comms, generic modem> at device 20.6 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff,0xe0000-0xe3fff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1596008629 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38154MB <TOSHIBA MK4026GAX PA100U> at ata0-master UDMA100
acd0: CDRW <TSSTcorpCDW/DVD TS-L462C/TO10> at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s1a
    ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND
SearchNode 0xc140c0a0 StartNode 0xc140c0a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc140bdc0), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND
SearchNode 0xc140c0a0 StartNode 0xc140c0a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc140bdc0), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND
SearchNode 0xc140c0a0 StartNode 0xc140c0a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc140bdc0), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND
SearchNode 0xc140c0a0 StartNode 0xc140c0a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc140bdc0), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND
SearchNode 0xc140c0a0 StartNode 0xc140c0a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc140bdc0), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND
SearchNode 0xc140c0a0 StartNode 0xc140c0a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc140bdc0), AE_NOT_FOUND
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
    ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND
SearchNode 0xc140c0a0 StartNode 0xc140c0a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc140bdc0), AE_NOT_FOUND
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout