Problem with Cisco (Atheros) Wireless PCI card on IBM Thinkcentre MT-M-8183-T1S

eric at iteso.mx eric at iteso.mx
Tue Jan 17 11:03:13 PST 2006 

Greetings from Merida, Yucatan, Mexico (The Maya Land)

Am having problems installing FreeBSD in my University under IBM Thinkcentre
MT-M-8183-T1S boxes.

I can´t detect the Wireless Cisco (Atheros) PCI lan card. Linux and Windows have
no problems recognizing the card but i have problems with FreeBSD 6.0

Here are my dmesg (with and with out ACPI).

I don´t know if this is a known issue, but any pointers will be greatly
appreciated.

I think that the pci3 line shows something but not sure about that.

Lic. Eric De La Cruz Lugo.
Merida, Yucatan, Mexico.
The Maya Land.
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
    root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <PTLTD  	 APIC  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2793.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf34  Stepping = 4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,<b14>>
  Hyperthreading: 2 logical CPUs
real memory  = 527892480 (503 MB)
avail memory = 507232256 (483 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD   RSDT> on motherboard
    ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.USB1._PRW] (Node 0xc1956a20), AE_AML_NO_RETURN_VALUE
    ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.USB1._PRW] (Node 0xc1956a20), AE_AML_NO_RETURN_VALUE
    ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.USB2._PRW] (Node 0xc1956900), AE_AML_NO_RETURN_VALUE
    ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.USB2._PRW] (Node 0xc1956900), AE_AML_NO_RETURN_VALUE
    ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.USB3._PRW] (Node 0xc19567e0), AE_AML_NO_RETURN_VALUE
    ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.USB3._PRW] (Node 0xc19567e0), AE_AML_NO_RETURN_VALUE
    ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.USB4._PRW] (Node 0xc19566c0), AE_AML_NO_RETURN_VALUE
    ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.USB4._PRW] (Node 0xc19566c0), AE_AML_NO_RETURN_VALUE
    ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.USBE._PRW] (Node 0xc1956620), AE_AML_NO_RETURN_VALUE
    ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.USBE._PRW] (Node 0xc1956620), AE_AML_NO_RETURN_VALUE
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 9 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 10 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 9 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0x1800-0x1807 mem 0xf0000000-0xf7ffffff,0xe8000000-0xe807ffff irq 16 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1820-0x183f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1840-0x185f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1860-0x187f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x1880-0x189f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe8080000-0xe80803ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0: BUFFALO ClipDrive, rev 2.00/2.00, addr 2
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib1
pci3: <network, ethernet> at device 9.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0x2000-0x203f mem 0xe8120000-0xe813ffff irq 16 at device 11.0 on pci3
em0: Ethernet address: 00:11:25:5d:9e:a0
em0:  Speed:N/A  Duplex:N/A
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (6280.3C)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.USB1._PRW] (Node 0xc1956a20), AE_AML_NO_RETURN_VALUE
    ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.USB2._PRW] (Node 0xc1956900), AE_AML_NO_RETURN_VALUE
    ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.USB3._PRW] (Node 0xc19567e0), AE_AML_NO_RETURN_VALUE
    ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.USB4._PRW] (Node 0xc19566c0), AE_AML_NO_RETURN_VALUE
    ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.USBE._PRW] (Node 0xc1956620), AE_AML_NO_RETURN_VALUE
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xca800-0xcb7ff,0xcb800-0xcc7ff,0xe0000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: vendor 0x04b3 product 0x310b, rev 2.00/1.60, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 2793017535 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 73764MB <S\^P3 0 1\^AA 8"1> at ata0-master WDMA0
acd0: CDROM <HL-DT-ST CD-ROM GCR-8482B/1.04> at ata0-slave UDMA33
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB 2.0 Flash Disk 2.00> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 250MB (512000 512 byte sectors: 64H 32S/T 250C)
Trying to mount root from ufs:/dev/ad0s2a
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
    root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
MPTable: <IBM      THINKCEN>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2793.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf34  Stepping = 4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,<b14>>
  Hyperthreading: 2 logical CPUs
real memory  = 527892480 (503 MB)
avail memory = 507248640 (483 MB)
ioapic0: Assuming intbase of 0
MPTable: Ignoring interrupt entry for missing ioapic1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0x1800-0x1807 mem 0xf0000000-0xf7ffffff,0xe8000000-0xe807ffff irq 16 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1820-0x183f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1840-0x185f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1860-0x187f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x1880-0x189f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe8080000-0xe80803ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0: BUFFALO ClipDrive, rev 2.00/2.00, addr 2
pcib1: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci3: <PCI bus> on pcib1
pci3: <network, ethernet> at device 9.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0x2000-0x203f mem 0xe8120000-0xe813ffff irq 16 at device 11.0 on pci3
em0: Ethernet address: 00:11:25:5d:9e:a0
em0:  Speed:N/A  Duplex:N/A
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xca800-0xcb7ff,0xcb800-0xcc7ff,0xe0000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
ums0: vendor 0x04b3 product 0x310b, rev 2.00/1.60, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 2793017437 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 73764MB <S\^P3 0 1\^AA 8"10> at ata0-master UDMA100
acd0: CDROM <HL-DT-ST CD-ROM GCR-8482B/1.04> at ata0-slave UDMA33
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB 2.0 Flash Disk 2.00> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 250MB (512000 512 byte sectors: 64H 32S/T 250C)
Trying to mount root from ufs:/dev/ad0s2a

More information about the freebsd-acpi mailing list