acpi_thermal on nforce 4 board

[Alex Zbyslaw]

Kevin Oberman wrote:

>Just as you see, my hw.acpi.thermal.tz0.temperature always reads 21.8C
>but mbmon says:
>
>Temp.= 30.0, 35.0, 15.0; Rot.= 0, 3125, 6250
>Vcore = 2.34, 3.31; Volt. = 3.17, 5.00, 2.07, -14.59, -7.66
>
>Clearly the 15.0 is bogus, but the CPU and system temps look to be
>right. The first number is the "system" temp and the second is the CPU.
>The manual does not list a third, so I don't think the chilly value has
>ANY meaning at all.
>  
>
I think you'll find the temps are "motherboard", "1st CPU" and "2nd CPU" 
so the third value is bogus for you if you only have one CPU.  Same for 
Vcore = 1st CPU and 2nd CPU.  I believe healthd lets you trim out some 
of the meaningless values (I've never quite bothered) and it sometimes 
works where mbmon doesn't .

--Alex