acpi_thermal on nforce 4 board

[Pav Lucistnik]

Kevin Oberman píše v pá 28. 04. 2006 v 10:12 -0700:

> I have not had any luck with ACPI for getting the temperature of my very
> similar system (MSI K8N Neo-4 with nForce4), but mbmon works fine on
> it. the sysctl output is identical
> 
> Just as you see, my hw.acpi.thermal.tz0.temperature always reads 21.8C
> but mbmon says:
> 
> Temp.= 30.0, 35.0, 15.0; Rot.= 0, 3125, 6250
> Vcore = 2.34, 3.31; Volt. = 3.17, 5.00, 2.07, -14.59, -7.66

You have any special drivers loaded? My mbmon complains it can't find
any hardware monitors. And SMBus is not probed on boot either.

-- 
Pav Lucistnik <pav at oook.cz>
              <pav at FreeBSD.org>

The hottest spot in the solar system is neither Mercury, Venus,
nor St. Louis in the summer.
  -- WUSTL Press Release
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: Toto je =?iso-8859-2?Q?digit=E1ln=EC?=
	=?ISO-8859-1?Q?_podepsan=E1?= =?iso-8859-2?Q?_=E8=E1st?=
	=?ISO-8859-1?Q?_zpr=E1vy?=
Url : http://lists.freebsd.org/pipermail/freebsd-acpi/attachments/20060428/37fefcfd/attachment.pgp