ACPI errors on amd64 (sempron)
Mathieu Prevot
mathieu_prevot at yahoo.fr
Thu Oct 20 13:16:29 PDT 2005
Sorry. More information here:
GENERIC kernel amd64 6.0RC1
1) dmesg after boot -v
2) sysctl hw.acpi
3) acpidump -t -d in the file
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RC1 #0: Sun Oct 9 20:36:12 UTC 2005
root at rat.samsco.home:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff809a3000.
Preloaded elf obj module "/boot/kernel/snd_via8233.ko" at
0xffffffff809a31d0.
Preloaded elf obj module "/boot/kernel/sound.ko" at 0xffffffff809a3700.
Calibrating clock(s) ... i8254 clock: 1193116 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1607400689 Hz
CPU: AMD Sempron(tm) Processor 2600+ (1607.40-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20fc2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,
MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 128 kbytes, 64 bytes/line, 1 lines/tag, 16-way
associative
real memory = 469696512 (447 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000aa0000 - 0x000000001b28ffff, 444530688 bytes (108528 pages)
avail memory = 441655296 (421 MB)
ACPI APIC Table: <VIAK8 AWRDACPI>
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
ioapic0 <Version 0.3> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050010 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
mem: <memory>
io: <I/O>
acpi0: <VIAK8 AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80008840
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=02041106)
AcpiOsDerivePciId: bus 0 dev 17 func 1
AcpiOsDerivePciId: bus 0 dev 15 func 1
AcpiOsDerivePciId: bus 0 dev 15 func 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
ACPI-0501: *** Error: Handler for [SystemMemory] returned
AE_AML_ALIGNMENT
ACPI-1304: *** Error: Method execution failed [\\_SB_.MEM_._CRS]
(Node 0xffffff0000091840), AE_AML_ALIGNMENT
ACPI-0239: *** Error: Method execution failed [\\_SB_.MEM_._CRS]
(Node 0xffffff0000091840), AE_AML_ALIGNMENT
can't fetch resources for \\_SB_.MEM_ - AE_AML_ALIGNMENT
ACPI-0501: *** Error: Handler for [SystemMemory] returned
AE_AML_ALIGNMENT
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0._CRS]
(Node 0xffffff0000091540), AE_AML_ALIGNMENT
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0._CRS]
(Node 0xffffff0000091540), AE_AML_ALIGNMENT
can't fetch resources for \\_SB_.PCI0 - AE_AML_ALIGNMENT
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 6 7 10 11 12
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 6 7 10 11 12
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link1: <ACPI PCI Link LNKB> irq 5 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 6 7 10 11 12
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 6 7 10 11 12
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 6 7 10 11 12
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link3: <ACPI PCI Link LNKD> on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link4: <ACPI PCI Link LNKE> on acpi0
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link5: <ACPI PCI Link LNKF> on acpi0
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link6: <ACPI PCI Link LNK0> on acpi0
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link7: <ACPI PCI Link LNK1> on acpi0
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link8: <ACPI PCI Link ALKA> irq 0 on acpi0
pci_link8: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20
pci_link8: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20
pci_link8: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20
pci_link9: <ACPI PCI Link ALKB> irq 0 on acpi0
pci_link9: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 21
pci_link9: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 21
pci_link9: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 21
pci_link10: <ACPI PCI Link ALKC> irq 0 on acpi0
pci_link10: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 22
pci_link10: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 22
pci_link10: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 22
pci_link11: <ACPI PCI Link ALKD> irq 0 on acpi0
pci_link11: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 23
pci_link11: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 23
pci_link11: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 23
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
ACPI: Found matching pin for 0.16.INTA at func 0: 11
pci_link9: BIOS IRQ 11 for -2145774744.16.INTA is invalid
ACPI: Found matching pin for 0.16.INTB at func 2: 5
pci_link9: BIOS IRQ 5 for -2145774744.16.INTB is invalid
ACPI: Found matching pin for 0.16.INTC at func 4: 10
pci_link9: BIOS IRQ 10 for -2145774744.16.INTC is invalid
ACPI: Found matching pin for 0.17.INTC at func 5: 10
pci_link10: BIOS IRQ 10 for -2145774744.17.INTC is invalid
ACPI: Found matching pin for 0.18.INTA at func 0: 11
pci_link11: BIOS IRQ 11 for -2145774744.18.INTA is invalid
ACPI: Found matching pin for 0.15.INTA at func 0: 255
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1106, dev=0x0204, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base e0000000, size 26, enabled
found-> vendor=0x1106, dev=0x1204, revid=0x00
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x2204, revid=0x00
bus=0, slot=0, func=2
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x3204, revid=0x00
bus=0, slot=0, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x4204, revid=0x00
bus=0, slot=0, func=4
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x7204, revid=0x00
bus=0, slot=0, func=7
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0xb188, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=15, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000d000, size 4, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x81
bus=0, slot=16, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000d400, size 5, enabled
pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.ALKB:0)
pci_link9: Picked IRQ 21 with weight 0
pcib0: slot 16 INTA routed to irq 21 via \\_SB_.PCI0.ALKB
found-> vendor=0x1106, dev=0x3038, revid=0x81
bus=0, slot=16, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000d800, size 5, enabled
pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.ALKB:0)
pcib0: slot 16 INTA routed to irq 21 via \\_SB_.PCI0.ALKB
found-> vendor=0x1106, dev=0x3038, revid=0x81
bus=0, slot=16, func=2
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000dc00, size 5, enabled
pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.ALKB:0)
pcib0: slot 16 INTB routed to irq 21 via \\_SB_.PCI0.ALKB
found-> vendor=0x1106, dev=0x3038, revid=0x81
bus=0, slot=16, func=3
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000e000, size 5, enabled
pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.ALKB:0)
pcib0: slot 16 INTB routed to irq 21 via \\_SB_.PCI0.ALKB
found-> vendor=0x1106, dev=0x3104, revid=0x86
bus=0, slot=16, func=4
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base ea000000, size 8, enabled
pcib0: matched entry for 0.16.INTC (src \\_SB_.PCI0.ALKB:0)
pcib0: slot 16 INTC routed to irq 21 via \\_SB_.PCI0.ALKB
found-> vendor=0x1106, dev=0x3227, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3059, revid=0x60
bus=0, slot=17, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e400, size 8, enabled
pcib0: matched entry for 0.17.INTC (src \\_SB_.PCI0.ALKC:0)
pci_link10: Picked IRQ 22 with weight 0
pcib0: slot 17 INTC routed to irq 22 via \\_SB_.PCI0.ALKC
found-> vendor=0x1106, dev=0x3065, revid=0x78
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000
ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e800, size 8, enabled
map[14]: type 1, range 32, base ea001000, size 8, enabled
pcib0: matched entry for 0.18.INTA (src \\_SB_.PCI0.ALKD:0)
pci_link11: Picked IRQ 23 with weight 0
pcib0: slot 18 INTA routed to irq 23 via \\_SB_.PCI0.ALKD
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
agp0: <VIA 8380 host to PCI bridge> mem 0xe0000000-0xe3ffffff at
device 0.0 on pci0
AMD64: 1 Misc. Control unit(s) found.
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xe8000000-0xe9ffffff
pcib1: prefetched decode 0xe4000000-0xe7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1106, dev=0x3108, revid=0x01
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base e4000000, size 26, enabled
pcib1: (null) requested memory range 0xe4000000-0xe7ffffff: good
map[14]: type 1, range 32, base e8000000, size 24, enabled
pcib1: (null) requested memory range 0xe8000000-0xe8ffffff: good
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <VIA 8237 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 15.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at
device 16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at
device 16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at
device 16.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdc00
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 21 at
device 16.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe000
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xea000000-0xea0000ff irq
21 at device 16.4 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xea000000
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8237> port 0xe400-0xe4ff irq 22 at device 17.5 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe400
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC655 AC97 Codec (id = 0x414c4760)>
pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features reserved 1, center DAC,
surround DAC, LFE DAC, reserved 5
pcm0: sndbuf_setmap 1a940000, 1000; 0xffffff001a940000 -> 1a940000
pcm0: sndbuf_setmap 1a47e000, 1000; 0xffffff001a47e000 -> 1a47e000
pcm0: sndbuf_setmap 199fc000, 1000; 0xffffff00199fc000 -> 199fc000
pcm0: sndbuf_setmap 19d7a000, 1000; 0xffffff0019d7a000 -> 19d7a000
pcm0: sndbuf_setmap 19917000, 1000; 0xffffff0019917000 -> 19917000
pcm0: sndbuf_setmap 19718000, 1000; 0xffffff0019718000 -> 19718000
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe800-0xe8ff mem
0xea001000-0xea0010ff irq 23 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x004063, model 0x0032, rev. 10
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:14:85:51:39:80
vr0: [MPSAFE]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ahc_isa_probe 13: ioport 0xdc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xcc000-0xd3fff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0xc021 0xc021 0xc021 0xc021
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xc021 0xc021 0xc021 0xc021
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
isa_probe_children: probing PnP devices
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass
3/1
ums0: 3 buttons and Z dir.
Device configuration finished.
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 100462496 hz
Timecounter "TSC" frequency 1607400689 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on VIA 8237 chip
ad0: setting UDMA100 on VIA 8237 chip
ad0: 152626MB <Seagate ST3160023A 3.06> at ata0-master UDMA100
ad0: 312579695 sectors [310098C/16H/63S] 16 sectors/interrupt 1 depth
queue
GEOM: new disk ad0
ad0: VIA check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on VIA 8237 chip
acd0: setting UDMA33 on VIA 8237 chip
acd0: <NEC DVD RW ND-3500AG/2.16> DVDR drive at ata1 as master
acd0: read 8268KB/s (8268KB/s) write 8268KB/s (8268KB/s), 2048KB
buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: setting PIO4 on VIA 8237 chip
acd1: setting UDMA33 on VIA 8237 chip
acd1: <PLEXTOR CD-R PX-W5224A/1.03> CDRW drive at ata1 as slave
acd1: read 6890KB/s (6890KB/s) write 8958KB/s (8958KB/s), 2048KB
buffer, UDMA33
acd1: Reads: CDR, CDRW, CDDA stream, packet
acd1: Writes: CDR, CDRW, test write, burnproof
acd1: Audio: play, 256 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: CD-ROM unknown
ATA PseudoRAID loaded
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
hw.acpi.supported_sleep_state: S1 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 0
hw.acpi.cpu.cx_supported: C1/0
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu.cx_usage: 100.00%
-------------- next part --------------
A non-text attachment was scrubbed...
Name: acpidump-t-d
Type: application/octet-stream
Size: 152434 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-acpi/attachments/20051020/d43e0cc5/acpidump-t-d-0001.obj
-------------- next part --------------
More information about the freebsd-acpi
mailing list