ACPI hang on 6.0-RELEASE on Compaq Proliant ML530 (866MHz Xeon)

[Pawel Worach]

John Baldwin wrote:
> On Monday 28 November 2005 09:38 am, Kevin Day wrote:
>> On Nov 28, 2005, at 7:10 AM, John Baldwin wrote:
>>> On Saturday 26 November 2005 11:18 am, Kevin Day wrote:
>>>> Hangs on boot after displaying kernel copyright notice with ACPI
>>>> enabled. Works fine with ACPI disabled.
>>>>
>>>> Server has two CPUs, but hang occurs with or without SMP kernel.
>>>>
>>>>
>>>>
>>>> acpidump at http://www.dragondata.com/~toasty/toasty-ml530.asl
>>>>
>>>>
>>>> dmesg from working config:
>>> Any chance you could use a serial console to capture the dmesg from
>>> a booth
>>> with ACPI enabled?
>> I get as far as:
>>> Copyright (c) 1992-2005 The FreeBSD Project.
>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
>>> 1994
>>>          The Regents of the University of California. All rights
>>> reserved.
>>> FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
>>>      root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
>> before it hangs. I realize that's not much to go on. :)
>>
>>
>> Since the next thing it should be displaying is the mptable string,
>> just in case this is relevant, here's the output of mptable:
> 
> Actually, in the ACPI case it won't use the mptable, but use the MADT table 
> from ACPI instead.  It is odd that your MADT is missing a Local NMI entry for 
> CPU 0.  Could you capture the dmesg from a boot -v over a serial console with 
> ACPI enabled?
> 

Hi,

I have the same problem with ML530 hardware, both RELENG_6_0 and 
RELENG_6 fail in the same way. ASL and boot -v output can be found here:
http://62.119.221.30/ml530-acpi/

It just hangs there after the "pci_link1: <ACPI PCI Link INA0> on acpi0" 
message, break to debugger doesn't work.

Regards


-- 
Pawel