ACPI & FDD
Ed Korotkov
bsword at mail.ru
Mon Apr 26 04:40:01 PDT 2004
OK. No attachments.
#boot -v
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08561cc.
Calibrating clock(s) ... i8254 clock: 1193192 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1999780952 Hz
CPU: Intel(R) Celeron(R) CPU 2.00GHz (1999.78-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>real
memory = 259260416 (247 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000000f2c0fff, 241807360 bytes (59035 pages)
avail memory = 242184192 (230 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f53e0
pnpbios: Entry = f0000:5a1a Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INTEL D845GVSR> on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000094
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25608086)
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00f52d0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 1 8 A 0x68 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
slot 1 1 0 A 0x69 3 4 5 6 7 9 10 11 12 14 15
slot 1 1 0 B 0x6a 3 4 5 6 7 9 10 11 12 14 15
slot 1 1 0 C 0x6b 3 4 5 6 7 9 10 11 12 14 15
slot 1 1 0 D 0x68 3 4 5 6 7 9 10 11 12 14 15
slot 2 1 1 A 0x6a 3 4 5 6 7 9 10 11 12 14 15
slot 2 1 1 B 0x69 3 4 5 6 7 9 10 11 12 14 15
slot 2 1 1 C 0x68 3 4 5 6 7 9 10 11 12 14 15
slot 2 1 1 D 0x6b 3 4 5 6 7 9 10 11 12 14 15
slot 3 1 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 3 1 2 B 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 3 1 2 C 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 3 1 2 D 0x60 3 4 5 6 7 9 10 11 12 14 15
slot 4 1 3 A 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 4 1 3 B 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 4 1 3 C 0x69 3 4 5 6 7 9 10 11 12 14 15
slot 4 1 3 D 0x6a 3 4 5 6 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
0.29.0
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
0.29.1
\\_SB_.LNKC irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
0.29.2
\\_SB_.LNKH irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
0.29.3
\\_SB_.LNKC irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
0.31.0
\\_SB_.LNKB irq 3: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
0.31.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
0.1.0
\\_SB_.LNKB irq 3: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
0.1.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
0.2.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
0.29.0
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
0.29.1
\\_SB_.LNKC irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
0.29.2
\\_SB_.LNKH irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
0.29.3
\\_SB_.LNKC irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
0.31.0
\\_SB_.LNKB irq 3: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
0.31.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
0.1.0
\\_SB_.LNKB irq 3: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
0.1.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
0.2.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x2560, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base f0000000, size 27, enabled
map[14]: type 1, range 32, base ffa80000, size 19, enabled
pcib0: matched entry for 0.2.INTA (source \\_SB_.LNKA)
pcib0: slot 2 INTA is routed to irq 11
found-> vendor=0x8086, dev=0x2562, revid=0x01
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000e800, size 5, enabled
pcib0: matched entry for 0.29.INTA (source \\_SB_.LNKA)
pcib0: slot 29 INTA is routed to irq 11
found-> vendor=0x8086, dev=0x24c2, revid=0x01
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 0000e880, size 5, enabled
pcib0: matched entry for 0.29.INTB (source \\_SB_.LNKD)
pcib0: slot 29 INTB is routed to irq 5
found-> vendor=0x8086, dev=0x24c4, revid=0x01
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[20]: type 4, range 32, base 0000ec00, size 5, enabled
pcib0: matched entry for 0.29.INTC (source \\_SB_.LNKC)
pcib0: slot 29 INTC is routed to irq 9
found-> vendor=0x8086, dev=0x24c7, revid=0x01
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=9
map[10]: type 1, range 32, base ffa7fc00, size 10, enabled
pcib0: matched entry for 0.29.INTD (source \\_SB_.LNKH)
pcib0: slot 29 INTD is routed to irq 10
found-> vendor=0x8086, dev=0x24cd, revid=0x01
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x244e, revid=0x81
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x02 (500 ns)
found-> vendor=0x8086, dev=0x24c0, revid=0x01
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00000000, size 3, enabled
map[14]: type 4, range 32, base 00000000, size 2, enabled
map[18]: type 4, range 32, base 00000000, size 3, enabled
map[1c]: type 4, range 32, base 00000000, size 2, enabled
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x8086, dev=0x24cb, revid=0x01
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 0000e000, size 5, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 3
found-> vendor=0x8086, dev=0x24c3, revid=0x01
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=3
map[10]: type 4, range 32, base 0000e400, size 8, enabled
map[14]: type 4, range 32, base 0000e080, size 6, enabled
map[18]: type 1, range 32, base ffa7f800, size 9, enabled
map[1c]: type 1, range 32, base ffa7f400, size 8, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 3
found-> vendor=0x8086, dev=0x24c5, revid=0x01
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=3
powerspec 2 supports D0 D3 current D0
agp0: <Intel 82845G (845G GMCH) SVGA controller> mem
0xffa80000-0xffafffff,0xf0000000-0xf7ffffff irq 11 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe800-0xe81f irq 11
at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe880-0xe89f irq 5 at
device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f irq 9 at
device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xff800000-0xff8fffff
pcib1: prefetched decode 0xe6a00000-0xe6afffff
---- initial configuration ------------------------
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.8.0
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.0.0
\\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.0.1
\\_SB_.LNKH irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.0.2
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.0.3
\\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.1.0
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.1.1
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.1.2
\\_SB_.LNKH irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.1.3
\\_SB_.LNKC irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.2.0
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.2.1
\\_SB_.LNKB irq 3: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.2.2
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.2.3
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.3.0
\\_SB_.LNKC irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.3.1
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.3.2
\\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.3.3
---- before setting priority for links ------------
\\_SB_.LNKF:
interrupts: 3 4 5 6 7 9 10 11 12 14
15
penalty: 1960 1660 960 1660 1660 1060 960 1360 1660 10660 10660
references: 3
priority: 0
\\_SB_.LNKG:
interrupts: 3 4 5 6 7 9 10 11 12 14
15
penalty: 1960 1660 960 1660 1660 1060 960 1360 1660 10660 10660
references: 3
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.LNKF:
interrupts: 3 4 5 6 7 9 10 11 12 14
15
penalty: 1960 1660 960 1660 1660 1060 960 1360 1660 10660 10660
references: 3
priority: 9343
\\_SB_.LNKG:
interrupts: 3 4 5 6 7 9 10 11 12 14
15
penalty: 1960 1660 960 1660 1660 1060 960 1360 1660 10660 10660
references: 3
priority: 9343
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.8.0
\\_SB_.LNKF irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.0.0
\\_SB_.LNKG irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.0.1
\\_SB_.LNKH irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.0.2
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.0.3
\\_SB_.LNKG irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.1.0
\\_SB_.LNKF irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.1.1
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.1.2
\\_SB_.LNKH irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.1.3
\\_SB_.LNKC irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.2.0
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.2.1
\\_SB_.LNKB irq 3: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.2.2
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.2.3
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.3.0
\\_SB_.LNKC irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.3.1
\\_SB_.LNKF irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.3.2
\\_SB_.LNKG irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable
1.3.3
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base ff8ff000, size 12, enabled
map[14]: type 4, range 32, base 0000dc00, size 6, enabled
pcib1: matched entry for 1.8.INTA (source \\_SB_.LNKE)
pcib1: slot 8 INTA is routed to irq 11
found-> vendor=0x8086, dev=0x1039, revid=0x81
bus=1, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0xdc00-0xdc3f mem
0xff8ff000-0xff8fffff irq 11 at device 8.0 on pci1
pcib1: device fxp0 requested decoded memory range 0xff8ff000-0xff8fffff
fxp0: using memory space register mapping
fxp0: Ethernet address 00:0c:f1:7e:cd:ae
fxp0: PCI IDs: 8086 1039 8086 3048 0081
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=7f ostat1=50
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=02 stat0=ff stat1=00 devices=0x8<ATAPI_SLAVE>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0xe080-0xe0bf,0xe400-0xe4ff mem
0xffa7f400-0xffa7f4ff,0xffa7f800-0xffa7f9ff irq 3 at device 31.5 on pci0
pcm0: <Avance Logic ALC202 AC97 Codec (id = 0x414c4740)>
pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume,
Realtek 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, double rate PCM,
reserved 1, AMAP, reserved 4
pcm0: sndbuf_setmap 286000, 4000; 0xd6541000 -> 286000
pcm0: sndbuf_setmap 29a000, 4000; 0xd6545000 -> 29a000
acpi_button0: <Sleep Button> on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
linprocfs registered
Timecounter "TSC" frequency 1999780952 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to
deny, logging limited to 100 packets/entry by default
IPv6 packet filtering initialized, logging limited to 100 packets/entry
Linux ELF exec handler installed
lo0: bpf attached
ata1: spurious interrupt - status=0x00 error=0x01
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH4 chip
ata0-master: setting UDMA100 on Intel ICH4 chip
GEOM: create disk ad0 dp=0xc2e5c660
ad0: <ST340014A/3.54> ATA-6 disk at ata0-master
ad0: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ata1-slave: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata1-slave: setting PIO4 on Intel ICH4 chip
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:78156162
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 40015954944 end 40015987199
GEOM: Configure ad0s1a, start 0 length 536870912 end 536870911
GEOM: Configure ad0s1b, start 536870912 length 536870912 end 1073741823
GEOM: Configure ad0s1c, start 0 length 40015954944 end 40015954943
GEOM: Configure ad0s1d, start 1073741824 length 536870912 end 1610612735
GEOM: Configure ad0s1e, start 1610612736 length 536870912 end 2147483647
GEOM: Configure ad0s1f, start 2147483648 length 37868471296 end 40015954943
acd0: <LTN486S/YQSJ> CDROM drive at ata1 as slave
acd0: read 8268KB/s (8268KB/s), 120KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: measured ac97 link rate at 48005 Hz, will use 48000 Hz
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
splash: image decoder found: blank_saver
More information about the freebsd-acpi
mailing list