cvs commit: src/sys/dev/sk if_sk.c if_skreg.h xmaciireg.h yukonreg.h

[Pyun YongHyeon]

On Tue, Jun 13, 2006 at 06:14:46AM +0300, Kostik Belousov wrote:
 > On Tue, Jun 13, 2006 at 02:11:53AM +0000, Pyun YongHyeon wrote:
 > > yongari     2006-06-13 02:11:53 UTC
 > > 
 > >   FreeBSD src repository
 > > 
 > >   Modified files:        (Branch: RELENG_6)
 > >     sys/dev/sk           if_sk.c if_skreg.h xmaciireg.h yukonreg.h 
 > >   Log:
 > >   Sync with HEAD.
 > >    - bus_dma(9), MPSAFE conversion
 > I updated my home machine (with P4P800 motherboard). sk0 interface
 > works. In dmesg I have:
 > 
 > skc0: <3Com 3C940 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeaf8000-0xfeafbfff
 >  irq 22 at device 5.0 on pci2
 >  skc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfeaf8000
 >  skc0: interrupt moderation is 100 us
 >  skc0: 3Com Gigabit LOM (3C940) rev. (0x1)
 >  skc0: PN: 40-0779-000
 >  skc0: EC: Rev. 1.2
 >  skc0: MN: 3Com
 >  skc0: SN: HFSR9B01E8
 >  skc0: chip ver  = 0xb0
 >  skc0: chip rev  = 0x01
 >  skc0: SK_EPROM0 = 0x00
 >  skc0: SRAM size = 0x020000
 >  sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
 >  sk0: bpf attached
 >  sk0: Ethernet address: 00:0e:a6:45:c7:75
 >  miibus0: <MII bus> on sk0
 >  e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
 >  e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
 >  ioapic0: routing intpin 22 (PCI IRQ 22) to vector 50
 >  skc0: [GIANT-LOCKED]
 >  ^^^^^^^^^^^^^^^^^^^^^ Is it right ?

Maybe debug.mpsafenet=0 due to the instability of the driver?

-- 
Regards,
Pyun YongHyeon