TravelMate 292
flex.banana
flex.banana at bluewin.ch
Mon Sep 20 04:35:15 PDT 2004
hello
my notebook don't boot with any of FreeBSD snapshots!
i have tryed to boot with any FreeBSD snap and release, today with
5.3BETA5 or 6.0-current
the message is the following:
this is from 6.0-current 20040901
boot -vp
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=0000000000009fc00
SMAP type=02 base=0000000000009fc00 len=0000000000000400
SMAP type=02 base=000000000000e000 len=0000000000020000
SMAP type=01 base=0000000000100000 len=000000000eef0000
SMAP type=03 base=000000000eff0000 len=000000000000ffc0
SMAP type=04 base=0000000000effffc0 len=0000000000000040
SMAP type=02 base=00000000ffb80000 len=0000000000080000
SMAP type=02 base=00000000fff80000 len=0000000000080000
Copyright (c) 1992-2004 The FreeBSD Project.
.....blablabl.....
FreeBSD 6.0-CURRENT #0: Wed Sep 1 03:13:58 UTC 2004
root at mango.internal.hasta.se:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e10000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0e10228.
Calibrating clock(s) ... i8254 clock: 1193291 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clocl: 1298902587 Hz
CPU: Intel(R) Celeron(R) M processor 1300MHz (1298.90-MHz 686-class
CPU)
Origin = "GenuineIntel" Id = 0x695 Stepping =
5
Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV
,PAT,C
FLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory = 251592704 (239 MB)
Physical memory chunk(s) :
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 (768 pages)
0x0000000001029000 - 0x000000000eb87fff, 230027264 (56159 pages)
avail memory = 232366080 (221 MB)
bios32: Found BIOS32 Service Directory header at 0xc00e7050
bios32: Entry = 0xe97d0 (c00e97d0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xe7000+0x27e4
pnpbios: Found PnP BIOS data at 0xc00ff020
pnpbios: Entry = eb000:34c6 Rev = 1.0
pnpbios: Envent flag at eb01e
pnpbios: OEM ID 8224744e
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35808086)
pcibios: BIOS version 2.10
Found $PIR table, 8 entries at 0cx00fe890
PCI-Only Interrupts: none
Location Bus Device Pic Link IRQs
embedded 0 29 A 0x60 5 10 11
embedded 0 29 B 0x63 5 10 11
embedded 0 29 C 0x62 5 10 11
embedded 0 29 D 0x6b 5 10 11
embedded 0 31 A 0x62 5 10 11
embedded 0 31 B 0x61 5 10 11
embedded 0 2 A 0x60 5 10 11
embedded 0 2 B 0x61 5 10 11
embedded 0 0 A 0x60 5 10 11
embedded 0 0 B 0x61 5 10 11
embedded 1 0 A 0x68 5 10 11
embedded 1 1 A 0x69 5 10 11
embedded 1 2 A 0x6a 5 10 11
embedded 1 2 B 0x6b 5 10 11
embedded 1 4 A 0x60 5 10 11
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 8 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x60 255 N 4 5 10 11
0x63 255 N 1 5 10 11
0x62 255 N 2 5 10 11
0x6b 255 N 2 5 10 11
0x61 255 N 3 5 10 11
0x68 255 N 1 5 10 11
0x69 255 N 1 5 10 11
0x6a 255 N 1 5 10 11
$PIR: Found mathing pin for 0.29.INTA at func 0: 255
$PIR: Found mathing pin for 0.29.INTB at func 1: 255
$PIR: Found mathing pin for 0.29.INTC at func 2: 255
$PIR: Found mathing pin for 0.29.INTD at func 7:10
$PIR: Found mathing pin for 0.31.INTA at func 1: 255
$PIR: Found mathing pin for 0.31.INTB at func 3: 255
$PIR: Found mathing pin for 0.31.INTB at func 5:5
$PIR: Found mathing pin for 0.2.INTA at func 0:11
$PIR: Found mathing pin for 1.1.INTA at func 0:11
$PIR: Found mathing pin for 1.2.INTA at func 0:11
$PIR: Found mathing pin for 1.4.INTA at func 0:255
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x60 11 Y 4 5 10 11
0x63 255 N 1 5 10 11
0x62 255 N 2 5 10 11
0x6b 10 Y 2 5 10 11
0x61 5 Y 3 5 10 11
0x68 255 N 1 5 10 11
0x69 11 Y 1 5 10 11
0x6a 11 Y 1 5 10 11
$PIR: IRQs used by BIOS: 5 10 11
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 3 0 0 0 0 2 6 0 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x3580, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, stratreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns
found-> vendor=0x8086, dev=0x3584, revid=0x02
bus=0, slot=0, func=1
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, stratreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns
found-> vendor=0x8086, dev=0x3585, revid=0x02
bus=0, slot=0, func=3
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, stratreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns
map[10]: type 3, range 32, base b0000000, size 27, enabled
map[14]: type 1, range 32, base f0000000, size 19, enabled
map[18]: type 4, range 32, base 0000e000, size 3, enabled
$PIR: 0:2 INTA routed to irq 11
found-> vendor=0x8086, dev=0x3582, revid=0x02
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, stratreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns
intpin=a, irq=11
powerspec 1 supports D0 D1 D3 current D0
map[10]: type 3, range 32, base 00000000, size 27, memory disabled
same message with the current release from today
any suggestions?
thanks for help!
Banana
More information about the cvs-src
mailing list