harti 2003/07/31 07:20:08 PDT
FreeBSD src repository
Modified files:
sys/dev/hfa fore_aali.h fore_command.c fore_init.c
fore_intr.c fore_var.h
Log:
Make the driver to work with firmware version 4.1.12 (other 4.X.Y should
also do it). Three problems have been encountered:
1. The initialisation command does not work in interrupt mode. Whether
this is a firmware bug or a feature is not clear. The original Fore
drivers execute the initialize command always in polling mode, so
it appears that this behaviour is expected. When we detect a 4.X.Y
firmware do busy wait on the command status.
2. The command code of the GET_PROM command has changed. This is an
unofficial command anyway. What was GET_PROM in 3.X.Y is CLEAR_STATS
in 4.X.Y (although unimplemented in the firmware). We need to
use the correct code depending on the firmware.
3. The 4.X.Y firmware can set the error flag in the command status
without also setting the completion flag (as the documenation says).
Check both variants.
An additional field in the per-card structure fu_ft4 is TRUE when we have
detected a 4.X.Y firmware. Otherwise it is false. The behaviour of the
driver when using a 3.X.Y firmware should be identical to the previous
behaviour.
This change will enable traffic shaping of (at least one) CBR channels.
Revision Changes Path
1.4 +3 -1 src/sys/dev/hfa/fore_aali.h
1.15 +11 -1 src/sys/dev/hfa/fore_command.c
1.14 +50 -3 src/sys/dev/hfa/fore_init.c
1.10 +6 -2 src/sys/dev/hfa/fore_intr.c
1.8 +1 -0 src/sys/dev/hfa/fore_var.h