Linux aic79xx troubles on HP xw6000

[Giacinti, Philippe {PRBI~Basel}]

> -----Original Message-----
> From: Justin T. Gibbs 
> Sent: Wednesday, February 18, 2004 4:30 PM
> To: Giacinti, Philippe {PRBI~Basel}; aic7xxx at freebsd.org
> Subject: RE: Linux aic79xx troubles on HP xw6000
> 
> 
> > The /proc/scsi/scsi seems to only give model and version...
> > Attached devices: 
> > Host: scsi0 Channel: 00 Id: 00 Lun: 00
> >   Vendor: SEAGATE  Model: ST336607LW       Rev: HPS4
> 
> Hmm.  Vendor specific firmware.  The standard firmware is up
> to 0007, and there was a, quite broken, 0004.  If we can assume
> that the last digit is the same for vendor firmware, your drives
> need to be upgraded.  You should contact HP to see if you have
> the latest firmware available for these drives.
> 
Hello Justin,

Thanks again for your advices.
Anyway, I contacted HP and this firmware seems to be the last available
one...
In the same time I tried to redesign all my stuff, but, as soon as two
disks are used at the same time because of a RAID system (md or lvm), I
have the same problematic behavior...

Any other thought ?

TIA

Philippe
-- 
Philippe Giacinti 
mailto:philippe.giacinti at roche.com