7501BR2 and HostRAID option
Yury Tarasievich
grog at grsu.by
Fri May 16 11:16:48 PDT 2003
When Host RAID option is enabled in SCSI setup, on-board Adaptec 79xx
controller doesn't get initialized, and vice versa.
I'm attaching boot -v outputs from boots with and without this option
enabled.
-------------- next part --------------
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Thu Apr 3 11:06:24 GMT 2003
root at freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/BOOTMFS
Calibrating clock(s) ... TSC clock: 1794656020 Hz, i8254 clock: 1193150 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 1794710788 Hz
CPU: Intel(R) Xeon(TM) CPU 1.80GHz (1794.71-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2147418112 (2097088K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00848000 - 0x7ffe7fff, 2138701824 bytes (522144 pages)
config> intro
\^[[m\^[[H\^[[J\^[[3;26H\^[[m\^[[1m\^[[m\^[[6;11H\^[[m\^[[7m\^[[m\^[[7;11H\^[[m\^[[8;11H\^[[m\^[[11;3H\^[[m\^[[12;3H\^[[m\^[[13;3H\^[[m\^[[15;3H\^[[m\^[[16;3H\^[[m\^[[18;3H\^[[m\^[[19;3H\^[[m\^[[21;3H\^[[m\^[[7m\^[[m\^[[22;3H\^[[m\^[[1;1H\^[[m\^[[H\^[[Javail memory = 2083987456 (2035144K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fdb20
bios32: Entry = 0xfdb34 (c00fdb34) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xdb55
pnpbios: Found PnP BIOS data at 0xc00f3070
pnpbios: Entry = f0000:292f Rev = 1.0
Other BIOS signatures found:
ACPI: 000ff9b0
Preloaded elf kernel "kernel" at 0xc0821000.
Preloaded mfs_root "/mfsroot" at 0xc0821090.
Pentium Pro MTRR support enabled
md0: Preloaded image </mfsroot> 4423680 bytes at 0xc03e7274
Creating DISK md0
Creating DISK md1
md1: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80031800
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=254c8086)
Using $PIR table, 19 entries at 0xc00f3540
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x254c, revid=0x01
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x2541, revid=0x01
class=ff-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x2545, revid=0x01
class=06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=4 secondarybus=2
found-> vendor=0x8086, dev=0x2546, revid=0x01
class=ff-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x244e, revid=0x42
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x2480, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x248b, revid=0x02
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=0
map[10]: type 1, range 32, base 00000000, size 3
map[14]: type 1, range 32, base 00000000, size 2
map[18]: type 1, range 32, base 00000000, size 3
map[1c]: type 1, range 32, base 00000000, size 2
map[20]: type 1, range 32, base 000003a0, size 4
found-> vendor=0x8086, dev=0x2483, revid=0x02
class=0c-05-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=0
map[20]: type 1, range 32, base 00000580, size 5
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1
pcib1: <PCI to PCI bridge (vendor=8086 device=2545)> at device 3.0 on pci0
found-> vendor=0x8086, dev=0x1461, revid=0x04
class=08-00-20, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base febe0000, size 12
found-> vendor=0x8086, dev=0x1460, revid=0x04
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=4 secondarybus=4
found-> vendor=0x8086, dev=0x1461, revid=0x04
class=08-00-20, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base febf0000, size 12
found-> vendor=0x8086, dev=0x1460, revid=0x04
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=3 secondarybus=3
pci2: <PCI bus> on pcib1
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci2
pci4: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci2
found-> vendor=0x9005, dev=0x809e, revid=0x03
class=01-04-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base 00002000, size 8
map[14]: type 1, range 64, base feaf0000, size 13
map[1c]: type 1, range 32, base 00002400, size 8
pci3: <PCI bus> on pcib3
pci3: <unknown card> (vendor=0x9005, dev=0x809e) at 3.0 irq 9
pci0: <unknown card> (vendor=0x8086, dev=0x2546) at 3.1
pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
found-> vendor=0x8086, dev=0x1229, revid=0x0d
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base fe7e0000, size 12
map[14]: type 1, range 32, base 00001400, size 6
map[18]: type 1, range 32, base fe7a0000, size 17
found-> vendor=0x8086, dev=0x100e, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base fe760000, size 17
map[18]: type 1, range 32, base 00001440, size 6
found-> vendor=0x1002, dev=0x4752, revid=0x27
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base fd000000, size 24
map[14]: type 1, range 32, base 00001000, size 8
map[18]: type 1, range 32, base fe7f0000, size 12
pci1: <PCI bus> on pcib4
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1400-0x143f mem 0xfe7a0000-0xfe7bffff,0xfe7e0000-0xfe7e0fff irq 10 at device 3.0 on pci1
fxp0: using memory space register mapping
fxp0: Ethernet address 00:03:47:31:19:8b
fxp0: PCI IDs: 8086 1229 8086 3418 000d
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
pci1: <unknown card> (vendor=0x8086, dev=0x100e) at 4.0 irq 5
pci1: <ATI Mach64-GR graphics accelerator> (vendor=0x1002, dev=0x4752) at 12.0 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x3a0-0x3af,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x03a0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 14 eb
ata0-slave: ATAPI ff 7f
ata0: mask=03 stat0=10 stat1=00
ata0: devices=04
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x03a8
ata1: mask=03 ostat0=00 ostat2=00
ata1-master: ATAPI 74 74
ata1-slave: ATAPI 74 74
ata1: mask=03 stat0=74 stat1=74
ata1: devices=00
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xd17ff,0xd1800-0xd2fff,0xd3000-0xd47ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg Test - 80
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - 0
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed 80
aha0: status reg test failed 0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model 4D Mouse, device ID 6-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 06 90 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: sl0 attached
ata0-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata0-master: success setting PIO4 on generic chip
acd0: <TEAC CD-552E/VER T016> CDROM drive at ata0 as master
acd0: read 4134KB/s (53284KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
Mounting root from ufs:/dev/md0c
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /stand/sysinstall
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port 0x1440-0x147f mem 0xfe760000-0xfe77ffff irq 5 at device 4.0 on pci1
bpf: em0 attached
em0: Speed:N/A Duplex:N/A
aha0: status reg test failed ff
ppc0: parallel port not found.
-------------- next part --------------
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Thu Apr 3 11:06:24 GMT 2003
root at freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/BOOTMFS
Calibrating clock(s) ... TSC clock: 1794659028 Hz, i8254 clock: 1193153 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 1794713540 Hz
CPU: Intel(R) Xeon(TM) CPU 1.80GHz (1794.71-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2147418112 (2097088K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00848000 - 0x7ffe7fff, 2138701824 bytes (522144 pages)
config> intro
\^[[m\^[[H\^[[J\^[[3;26H\^[[m\^[[1m\^[[m\^[[6;11H\^[[m\^[[7m\^[[m\^[[7;11H\^[[m\^[[8;11H\^[[m\^[[11;3H\^[[m\^[[12;3H\^[[m\^[[13;3H\^[[m\^[[15;3H\^[[m\^[[16;3H\^[[m\^[[18;3H\^[[m\^[[19;3H\^[[m\^[[21;3H\^[[m\^[[7m\^[[m\^[[22;3H\^[[m\^[[1;1H\^[[m\^[[H\^[[Javail memory = 2083987456 (2035144K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fdb20
bios32: Entry = 0xfdb34 (c00fdb34) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xdb55
pnpbios: Found PnP BIOS data at 0xc00f3070
pnpbios: Entry = f0000:292f Rev = 1.0
Other BIOS signatures found:
ACPI: 000ff9b0
Preloaded elf kernel "kernel" at 0xc0821000.
Preloaded mfs_root "/mfsroot" at 0xc0821090.
Pentium Pro MTRR support enabled
md0: Preloaded image </mfsroot> 4423680 bytes at 0xc03e7274
Creating DISK md0
Creating DISK md1
md1: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80031800
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=254c8086)
Using $PIR table, 19 entries at 0xc00f3540
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x254c, revid=0x01
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x2541, revid=0x01
class=ff-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x2545, revid=0x01
class=06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=4 secondarybus=2
found-> vendor=0x8086, dev=0x2546, revid=0x01
class=ff-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x244e, revid=0x42
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x2480, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x248b, revid=0x02
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=0
map[10]: type 1, range 32, base 00000000, size 3
map[14]: type 1, range 32, base 00000000, size 2
map[18]: type 1, range 32, base 00000000, size 3
map[1c]: type 1, range 32, base 00000000, size 2
map[20]: type 1, range 32, base 000003a0, size 4
found-> vendor=0x8086, dev=0x2483, revid=0x02
class=0c-05-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=0
map[20]: type 1, range 32, base 00000580, size 5
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1
pcib1: <PCI to PCI bridge (vendor=8086 device=2545)> at device 3.0 on pci0
found-> vendor=0x8086, dev=0x1461, revid=0x04
class=08-00-20, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base febe0000, size 12
found-> vendor=0x8086, dev=0x1460, revid=0x04
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=4 secondarybus=4
found-> vendor=0x8086, dev=0x1461, revid=0x04
class=08-00-20, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base febf0000, size 12
found-> vendor=0x8086, dev=0x1460, revid=0x04
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=3 secondarybus=3
pci2: <PCI bus> on pcib1
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci2
pci4: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci2
found-> vendor=0x9005, dev=0x801e, revid=0x03
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base 00002000, size 8
map[14]: type 1, range 64, base feaf0000, size 13
map[1c]: type 1, range 32, base 00002400, size 8
pci3: <PCI bus> on pcib3
ahd0: <Adaptec AIC7901A Ultra320 SCSI adapter> port 0x2400-0x24ff,0x2000-0x20ff mem 0xfeaf0000-0xfeaf1fff irq 9 at device 3.0 on pci3
ahd0: Defaulting to MEMIO on
ahd0: Reading SEEPROM...done.
ahd0: STPWLEVEL is on
ahd0: Manual Primary Termination
ahd0: Manual Secondary Termination
ahd0: Primary High byte termination Enabled
ahd0: Primary Low byte termination Enabled
ahd0: Secondary High byte termination Disabled
ahd0: Secondary Low byte termination Disabled
ahd0: Downloading Sequencer Program... 716 instructions downloaded
ahd0: Features 0x101, Bugs 0xfffff, Flags 0x43f0
aic7901A: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
pci0: <unknown card> (vendor=0x8086, dev=0x2546) at 3.1
pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
found-> vendor=0x8086, dev=0x1229, revid=0x0d
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base fe7e0000, size 12
map[14]: type 1, range 32, base 00001400, size 6
map[18]: type 1, range 32, base fe7a0000, size 17
found-> vendor=0x8086, dev=0x100e, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base fe760000, size 17
map[18]: type 1, range 32, base 00001440, size 6
found-> vendor=0x1002, dev=0x4752, revid=0x27
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base fd000000, size 24
map[14]: type 1, range 32, base 00001000, size 8
map[18]: type 1, range 32, base fe7f0000, size 12
pci1: <PCI bus> on pcib4
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1400-0x143f mem 0xfe7a0000-0xfe7bffff,0xfe7e0000-0xfe7e0fff irq 10 at device 3.0 on pci1
fxp0: using memory space register mapping
fxp0: Ethernet address 00:03:47:31:19:8b
fxp0: PCI IDs: 8086 1229 8086 3418 000d
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
pci1: <unknown card> (vendor=0x8086, dev=0x100e) at 4.0 irq 5
pci1: <ATI Mach64-GR graphics accelerator> (vendor=0x1002, dev=0x4752) at 12.0 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x3a0-0x3af,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x03a0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 14 eb
ata0-slave: ATAPI ff 7f
ata0: mask=03 stat0=10 stat1=00
ata0: devices=04
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x03a8
ata1: mask=03 ostat0=00 ostat2=00
ata1-master: ATAPI 74 74
ata1-slave: ATAPI 74 74
ata1: mask=03 stat0=74 stat1=74
ata1: devices=00
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xd17ff,0xd1800-0xd2fff,0xd3000-0xd47ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg Test - 80
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - 0
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed 80
aha0: status reg test failed 0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model 4D Mouse, device ID 6-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 06 90 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: sl0 attached
ata0-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata0-master: success setting PIO4 on generic chip
acd0: <TEAC CD-552E/VER T016> CDROM drive at ata0 as master
acd0: read 4134KB/s (53284KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
Waiting 15 seconds for SCSI devices to settle
ahd0: Downloading Sequencer Program... 716 instructions downloaded
ahd0: Features 0x101, Bugs 0xfffff, Flags 0x43f0
(noperiph:ahd0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(ahd0:A:1:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 3f
(ahd0:A:1:0): Received PPR width 1, period 9, offset 7f,options 2
Filtered to width 1, period 9, offset 7f, options 2
ahd0: target 1 using 16bit transfers
ahd0: target 1 synchronous with period = 0x9, offset = 0x7f(DT)
(ahd0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 3f
(ahd0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
Filtered to width 1, period 9, offset 7f, options 2
ahd0: target 0 using 16bit transfers
ahd0: target 0 synchronous with period = 0x9, offset = 0x7f(DT)
Creating DISK da0
Creating DISK da1
da0 at ahd0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS10K3_36_WLS 020W> Fixed Direct Access SCSI-3 device
da0: Serial Number 344215947042
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 35074MB (71833096 512 byte sectors: 255H 63S/T 4471C)
da1 at ahd0 bus 0 target 1 lun 0
da1: <QUANTUM ATLAS10K3_36_WLS 020W> Fixed Direct Access SCSI-3 device
da1: Serial Number 344215947842
da1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da1: 35074MB (71833096 512 byte sectors: 255H 63S/T 4471C)
Mounting root from ufs:/dev/md0c
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /stand/sysinstall
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port 0x1440-0x147f mem 0xfe760000-0xfe77ffff irq 5 at device 4.0 on pci1
bpf: em0 attached
em0: Speed:N/A Duplex:N/A
aha0: status reg test failed ff
ppc0: parallel port not found.
da0: invalid primary partition table: no magic
da0: invalid primary partition table: no magic
da0: invalid primary partition table: no magic
da0: invalid primary partition table: no magic
da0: invalid primary partition table: no magic
da0: invalid primary partition table: no magic
da0: invalid primary partition table: no magic
da0: invalid primary partition table: no magic
da1: invalid primary partition table: no magic
da1: invalid primary partition table: no magic
da1: invalid primary partition table: no magic
da1: invalid primary partition table: no magic
da1: invalid primary partition table: no magic
da1: invalid primary partition table: no magic
da1: invalid primary partition table: no magic
da1: invalid primary partition table: no magic
da0: invalid primary partition table: no magic
da1: invalid primary partition table: no magic
More information about the aic7xxx
mailing list