scsi type: adaptec scsi 29160

Nasher The Trasher nasher2k at hotmail.com
Mon Dec 15 02:46:31 PST 2003


   scsi type: adaptec scsi 29160
   when i boot my kernel i get an error:


   scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
   <Adaptec 29160 Ultra160 SCSI adapter>
   aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
   scsi0:A:0:0: DV failed to configure device. Please file a bug report
   against th
   is driver.
   (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
   Vendor: IBM Model: DDYS-T18350M Rev: S80D
   Type: Direct-Access ANSI SCSI revision: 03
   scsi0:A:0:0: Tagged Queuing enabled. Depth 253
   Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
   SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
   i posted this on a forum (gentoo) and a guy replyed to me and suggest
   me to email the aic7xxx mailing list
   i compiled the kernel with
   -----
   DV is the abbreviation for "Domain Validation". you need to compile
   your scsi driver again (maybe just the module or the kernel, depending
   how you have configured your kernel) and you need to enable the
   debugging code and set the debug mask to 2112 decimal. both of the
   mentioned settings are kernel config options
   ----
   and my output is:
   ICH2: IDE controller at PCI slot 00:1f.1
   ICH2: chipset revision 2
   ICH2: not 100% native mode: will probe irqs later
       ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
   hda: CD-950E/TKU, ATAPI CD/DVD-ROM drive
   ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
   hda: attached ide-cdrom driver.
   hda: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)
   Uniform CD-ROM driver Revision: 3.12
   SCSI subsystem driver Revision: 1.00
   PCI: Found IRQ 9 for device 02:0a.0
   Launching DV Thread
   scsi0: Waking DV thread
   scsi0: Beginning Domain Validation
   scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
           <Adaptec 29160 Ultra160 SCSI adapter>
           aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
   scsi0:A:0:0: Performing DV
   scsi0:2450: Going from state 0 to state 1
   scsi0:A:0:0: Sending INQ
   scsi0:0:0: Command completed, status= 0x10000
   scsi0:A:0:0: Entering ahc_linux_dv_transition, state= 1, status= 0x0,
   cmd->result= 0x10000
   scsi0:2625: Going from state 1 to state 2
   scsi0:A:0:0: Sending INQ
   scsi0:0:0: Command completed, status= 0x10000
   scsi0:A:0:0: Entering ahc_linux_dv_transition, state= 2, status= 0x0,
   cmd->result= 0x10000
   scsi0:2625: Going from state 2 to state 3
   scsi0:A:0:0: Sending INQ
   scsi0:0:0: Command completed, status= 0x10000
   scsi0:A:0:0: Entering ahc_linux_dv_transition, state= 3, status= 0x0,
   cmd->result= 0x10000
   scsi0:2672: Going from state 3 to state 4
   scsi0:A:0:0: Sending TUR
   scsi0:0:0: Command completed, status= 0x80a0002
   scsi0:A:0:0: Entering ahc_linux_dv_transition, state= 4, status=
   0x10905, cmd->result= 0x80a0002
   scsi0:2818: Going from state 4 to state 4
   scsi0:A:0:0: Sen ding TUR
   scsi0:0:0: Command completed, status= 0x10000
   scsi0:A:0:0: Entering ahc_linux_dv_transition, state= 4, status= 0x0,
   cmd->result= 0x10000
   scsi0:2807: Going from state 4 to state 5
   scsi0:A:0:0: Sending REBD
   scsi0:0:0: Command completed, status= 0x10000
   scsi0:A:0:0: Entering ahc_linux_dv_transition, state= 5, status= 0x0,
   cmd->result= 0x10000
   scsi0:2867: Going from state 5 to state 7
   scsi0:A:0:0: Echo buffer size= 0
   scsi0:2877: Going from state 7 to state 0
   scsi0:A:0:0: DV failed to configure device.  Please file a bug report
   against this driver.
   scsi0:A:1:0: Performing DV
   scsi0:2450: Going from state 0 to state 1
   scsi0:A:1:0: Sending INQ
   scsi0:0:1: Command completed, status= 0x80000
   scsi0:A:1:0: Entering ahc_linux_dv_transition, state= 1, status=
   0x20005, cmd->result= 0x80000
   scsi0:2644: Going from state 1 to state 0
   scsi0:A:1:0: Failed DV inquiry, skipping
   scsi0:A:2:0: Performing DV
   scsi0:2450: Go ing from state 0 to state 1
   scsi0:A:2:0: Sending INQ
   scsi0:0:2: Command completed, status= 0x80000
   scsi0:A:2:0: Entering ahc_linux_dv_transition, state= 1, status=
   0x20005, cmd->result= 0x80000
   scsi0:2644: Going from state 1 to state 0
   scsi0:A:2:0: Failed DV inquiry, skipping
   scsi0:A:3:0: Performing DV
   scsi0:2450: Going from state 0 to state 1
   scsi0:A:3:0: Sending INQ
   scsi0:0:3: Command completed, status= 0x80000
   scsi0:A:3:0: Entering ahc_linux_dv_transition, state= 1, status=
   0x20005, cmd->result= 0x80000
   scsi0:2644: Going from state 1 to state 0
   scsi0:A:3:0: Failed DV inquiry, skipping
   scsi0:A:4:0: Performing DV
   scsi0:2450: Going from state 0 to state 1
   scsi0:A:4:0: Sending INQ
   scsi0:0:4: Command completed, status= 0x80000
   scsi0:A:4:0: Entering ahc_linux_dv_transition, state= 1, status=
   0x20005, cmd->result= 0x80000
   scsi0:2644: Going from state 1 to state 0
   scsi0:A:4:0: Failed DV inquiry, skipping
   scsi0:A :5:0: Performing DV
   scsi0:2450: Going from state 0 to state 1
   scsi0:A:5:0: Sending INQ
   scsi0:0:5: Command completed, status= 0x80000
   scsi0:A:5:0: Entering ahc_linux_dv_transition, state= 1, status=
   0x20005, cmd->result= 0x80000
   scsi0:2644: Going from state 1 to state 0
   scsi0:A:5:0: Failed DV inquiry, skipping
   scsi0:A:6:0: Performing DV
   scsi0:2450: Going from state 0 to state 1
   scsi0:A:6:0: Sending INQ
   scsi0:0:6: Command completed, status= 0x80000
   scsi0:A:6:0: Entering ahc_linux_dv_transition, state= 1, status=
   0x20005, cmd->result= 0x80000
   scsi0:2644: Going from state 1 to state 0
   scsi0:A:6:0: Failed DV inquiry, skipping
   scsi0:A:8:0: Performing DV
   scsi0:2450: Going from state 0 to state 1
   scsi0:A:8:0: Sending INQ
   scsi0:0:8: Command completed, status= 0x80000
   scsi0:A:8:0: Entering ahc_linux_dv_transition, state= 1, status=
   0x20005, cmd->result= 0x80000
   scsi0:2644: Going from state 1 to state 0
   scsi0:A:8:0: F ailed DV inquiry, skipping
   scsi0:A:9:0: Performing DV
   scsi0:2450: Going from state 0 to state 1
   scsi0:A:9:0: Sending INQ
   scsi0:0:9: Command completed, status= 0x80000
   scsi0:A:9:0: Entering ahc_linux_dv_transition, state= 1, status=
   0x20005, cmd->result= 0x80000
   scsi0:2644: Going from state 1 to state 0
   scsi0:A:9:0: Failed DV inquiry, skipping
   scsi0:A:10:0: Performing DV
   scsi0:2450: Going from state 0 to state 1
   scsi0:A:10:0: Sending INQ
   scsi0:0:10: Command completed, status= 0x80000
   scsi0:A:10:0: Entering ahc_linux_dv_transition, state= 1, status=
   0x20005, cmd->result= 0x80000
   scsi0:2644: Going from state 1 to state 0
   scsi0:A:10:0: Failed DV inquiry, skipping
   scsi0:A:11:0: Performing DV
   scsi0:2450: Going from state 0 to state 1
   scsi0:A:11:0: Sending INQ
   scsi0:0:11: Command completed, status= 0x80000
   scsi0:A:11:0: Entering ahc_linux_dv_transition, state= 1, status=
   0x20005, cmd->result= 0x80000
   scsi0:2644: G oing from state 1 to state 0
   scsi0:A:11:0: Failed DV inquiry, skipping
   scsi0:A:12:0: Performing DV
   scsi0:2450: Going from state 0 to state 1
   scsi0:A:12:0: Sending INQ
   scsi0:0:12: Command completed, status= 0x80000
   scsi0:A:12:0: Entering ahc_linux_dv_transition, state= 1, status=
   0x20005, cmd->result= 0x80000
   scsi0:2644: Going from state 1 to state 0
   scsi0:A:12:0: Failed DV inquiry, skipping
   scsi0:A:13:0: Performing DV
   scsi0:2450: Going from state 0 to state 1
   scsi0:A:13:0: Sending INQ
   scsi0:0:13: Command completed, status= 0x80000
   scsi0:A:13:0: Entering ahc_linux_dv_transition, state= 1, status=
   0x20005, cmd->result= 0x80000
   scsi0:2644: Going from state 1 to state 0
   scsi0:A:13:0: Failed DV inquiry, skipping
   scsi0:A:14:0: Performing DV
   scsi0:2450: Going from state 0 to state 1
   scsi0:A:14:0: Sending INQ
   scsi0:0:14: Command completed, status= 0x80000
   scsi0:A:14:0: Entering ahc_linux_dv_transition, state= 1, statu s=
   0x20005, cmd->result= 0x80000
   scsi0:2644: Going from state 1 to state 0
   scsi0:A:14:0: Failed DV inquiry, skipping
   scsi0:A:15:0: Performing DV
   scsi0:2450: Going from state 0 to state 1
   scsi0:A:15:0: Sending INQ
   scsi0:0:15: Command completed, status= 0x80000
   scsi0:A:15:0: Entering ahc_linux_dv_transition, state= 1, status=
   0x20005, cmd->result= 0x80000
   scsi0:2644: Going from state 1 to state 0
   scsi0:A:15:0: Failed DV inquiry, skipping
   (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
     Vendor: IBM       Model: DDYS-T18350M      Rev: S80D
     Type:   Direct-Access                      ANSI SCSI revision: 03
   scsi0:A:0:0: Tagged Queuing enabled.  Depth 253
   Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
   SCSI device sda: 3 5843670 512-byte hdwr sectors (18352 MB)
   Partition check:
    /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
   mice: PS/2 mouse device common for all mice
   NET4: Linux TCP/IP 1.0 for NET4.0

     _________________________________________________________________

   Spel spelletjes met je online vrienden via MSN Messenger [1]klik hier

References

   1. http://g.msn.com/8HMBNLNL/2743??PS=


More information about the aic7xxx mailing list