Problems in -current, post Feb/March
Jim Bryant
kc5vdj at yahoo.com
Sat Jun 30 23:42:24 PDT 2001
Jim Bryant wrote:
>
> Although I have a backup of the source files, this bug is preventing me
> from being able to get to them and obtain the dates of the latest
> version I know to work...
>
> The following problem does not exist in 4.3-CURRENT.
>
> I recently got online again after a hiatus of a few months, and
> immediately updated my -current system.
>
> After updating, my second [B] SCSI channel comes up as ahc0, and the
> primary [A] channel doesn't even get recognized. I am using a Tyan
> DLUA-1696 motherboard, which essentially has an Adaptec 3940UW on the
> motherboard.
>
> My CD-ROM and DDS Tape drive are on the channel that refuses to work in
> -current.
>
> What are the differences between -current and 4.3-STABLE?
>
> I'll have to reboot to get a BOOT_VERBOSE to post here, I'll followup
> with such in a little while.
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.0-CURRENT #12: Sun Jun 24 20:31:01 CDT 2001
jbryant at wahoo.kc.rr.com:/usr/src/sys/compile/WAHOO
Calibrating clock(s) ... TSC clock: 333000930 Hz, i8254 clock: 1192995
Hz
Timecounter "i8254" frequency 1192995 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (333.00-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x650 Stepping = 0
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 536870912 (524288K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00486000 - 0x1fff7fff, 532094976 bytes (129906 pages)
avail memory = 519233536 (507064K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 16 -> irq 11
IOAPIC #0 intpin 17 -> irq 10
IOAPIC #0 intpin 18 -> irq 9
IOAPIC #0 intpin 19 -> irq 15
SMP: CPU0 apic_initialize():
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00fdb60
bios32: Entry = 0xfdb70 (c00fdb70) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdb91
pnpbios: Found PnP BIOS data at 0xc00f7a40
pnpbios: Entry = f0000:71ce Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc045d000.
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
VESA: information block
56 45 53 41 00 02 a1 72 00 c0 01 00 00 00 22 00
00 01 00 01 02 01 b6 72 00 c0 bd 72 00 c0 c6 72
00 c0 00 01 01 01 02 01 03 01 05 01 07 01 08 01
09 01 0a 01 0b 01 0c 01 10 01 11 01 12 01 13 01
VESA: 25 mode(s) found
VESA: v2.0, 16384k memory, flags:0x1, mode table:0xc03cca02 (1000022)
VESA: Matrox Graphics Inc.
VESA: Matrox MGA-G200 00
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> at pcibus 0 on
motherboard
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 28, enabled
found-> vendor=0x8086, dev=0x7180, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
found-> vendor=0x8086, dev=0x7181, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x8086, dev=0x7110, revid=0x01
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 0000ef80, size 5, port disabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=0
map[90]: type 4, range 32, base 0000fcb0, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x01
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
map[10]: type 4, range 32, base 0000e800, size 8, enabled
map[14]: type 1, range 32, base febfec00, size 10, enabled
found-> vendor=0x1317, dev=0x0985, revid=0x11
bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000ef40, size 5, enabled
found-> vendor=0x1102, dev=0x0002, revid=0x04
bus=0, slot=12, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
intpin=a, irq=10
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000eff0, size 3, enabled
found-> vendor=0x1102, dev=0x7002, revid=0x01
bus=0, slot=12, func=1
class=09-80-00, hdrtype=0x00, mfdev=1
powerspec 1 supports D0 D3 current D0
map[10]: type 3, range 32, base fd9fe000, size 12, enabled
found-> vendor=0x109e, dev=0x036e, revid=0x02
bus=0, slot=13, func=0
class=04-00-00, hdrtype=0x00, mfdev=1
intpin=a, irq=9
map[10]: type 3, range 32, base fd9ff000, size 12, enabled
found-> vendor=0x109e, dev=0x0878, revid=0x02
bus=0, slot=13, func=1
class=04-80-00, hdrtype=0x00, mfdev=1
intpin=a, irq=9
map[10]: type 1, range 32, base febfeb80, size 7, enabled
map[14]: type 4, range 32, base 0000e480, size 7, enabled
map[18]: type 1, range 32, base febe0000, size 16, enabled
found-> vendor=0x1011, dev=0x000f, revid=0x00
bus=0, slot=14, func=0
class=02-02-00, hdrtype=0x00, mfdev=0
intpin=a, irq=15
map[10]: type 4, range 32, base 0000e000, size 8, enabled
map[14]: type 1, range 32, base febfd000, size 12, enabled
found-> vendor=0x9004, dev=0x7895, revid=0x03
bus=0, slot=15, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
intpin=a, irq=15
map[10]: type 4, range 32, base 0000ec00, size 8, enabled
map[14]: type 1, range 32, base febff000, size 12, enabled
found-> vendor=0x9004, dev=0x7895, revid=0x03
bus=0, slot=15, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
intpin=b, irq=11
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xfda00000-0xfeafffff
pcib1: prefetched decode 0xdb800000-0xdd8fffff
pci1: physical bus=1
map[10]: type 3, range 32, base dc000000, size 24, enabled
map[14]: type 1, range 32, base feafc000, size 14, enabled
map[18]: type 1, range 32, base fe000000, size 23, enabled
found-> vendor=0x102b, dev=0x0521, revid=0x01
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=0
powerspec 1 supports D0 D3 current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1
on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe 00 00
ata0-slave: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 0 at device 7.2 on
pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6
Timecounter "PIIX" frequency 3579545 Hz
pci0: <bridge, PCI-unknown> at 7.3 (no driver attached)
dc0: <ADMtek AN985 10/100BaseTX> port 0xe800-0xe8ff mem
0xfebfec00-0xfebfefff irq 11 at device 11.0 on pci0
dc0: Ethernet address: 00:04:5a:42:cd:67
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x000895, model 0x0001, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: dc0 attached
pcm0: <Creative EMU10K1> port 0xef40-0xef5f irq 10 at device 12.0 on
pci0
emu: setmap (5f7000, 800), nseg=1, error=0
emu: setmap (647000, 1000), nseg=1, error=0
pcm0: ac97 codec id 0x54524103 (TriTech TR?????)
pcm0: ac97 codec features 6 bit master volume, no 3D Stereo Enhancement
emu: setmap (687000, 1000), nseg=1, error=0
emu: setmap (6c7000, 1000), nseg=1, error=0
emu: setmap (707000, 1000), nseg=1, error=0
emu: setmap (747000, 1000), nseg=1, error=0
pcm: setmap 787000, 1000; 0xcec43000 -> 787000
pcm: setmap 7c7000, 1000; 0xcec83000 -> 7c7000
pcm: setmap 807000, 1000; 0xcecc3000 -> 807000
bktr0: <BrookTree 878> mem 0xfd9fe000-0xfd9fefff irq 9 at device 13.0 on
pci0
bti2c0: <bt848 Hard/Soft I2C controller>
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicbus: iic devclass not found
smbus0: <System Management Bus> on bti2c0
smbus: smb devclass not found
brooktree0: PCI bus latency is 32.
bktr0: buffer size 3555328, addr 0x5000000
bktr0: GPIO is 0x000a141b
bktr0: subsystem 0x0070 0x13eb
bktr0: Hauppauge Model 37381 B123
bktr0: Detected a MSP3430G-A1 at 0x80
bktr0: Detected a DPL3418A-A2 at 0x84
bktr0: Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, msp3400c
stereo, dpl3518a dolby, remote control.
pci0: <multimedia> at 13.1 (no driver attached)
pci0: <network, fddi> at 14.0 (no driver attached)
ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0xe000-0xe0ff mem
0xfebfd000-0xfebfdfff irq 15 at device 15.0 on pci0
ahc0: Reading SEEPROM...checksum error
ahc0: No SEEPROM available.
ahc0: Using left over BIOS settings
ahc0: External SRAM, fast access, 64bytes/SCB
ahc0: Downloading Sequencer Program... 395 instructions downloaded
device_probe_and_attach: ahc0 attach returned 12
ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0xec00-0xecff mem
0xfebff000-0xfebfffff irq 11 at device 15.1 on pci0
ahc0: Reading SEEPROM...checksum error
ahc0: No SEEPROM available.
ahc0: Using left over BIOS settings
ahc0: External SRAM, fast access, 64bytes/SCB
ahc0: Downloading Sequencer Program... 395 instructions downloaded
aic7895: Ultra Wide Channel B, SCSI Id=7, 255 SCBs
ata-: ata0 already exists, using ata2 instead
ata-: ata1 already exists, using ata3 instead
ppc-: ppc0 already exists, using ppc1 instead
Trying Read_Port at 203
YMH0021: start dependant
YMH0021: adding io range 0x220-0x22f, size=0x10, align=0x10
YMH0021: adding io range 0x530-0x537, size=0x8, align=0x8
YMH0021: adding io range 0x388-0x38b, size=0x4, align=0x4
YMH0021: adding io range 0x330-0x331, size=0x2, align=0x2
YMH0021: adding io range 0x370-0x371, size=0x2, align=0x2
YMH0021: adding irq mask 0x20
YMH0021: adding dma mask 0x1
YMH0021: adding dma mask 0x2
YMH0021: start dependant
YMH0021: adding io range 0x240-0x24f, size=0x10, align=0x10
YMH0021: adding io range 0xe80-0xe87, size=0x8, align=0x8
YMH0021: adding io range 0x388-0x38b, size=0x4, align=0x4
YMH0021: adding io range 0x300-0x301, size=0x2, align=0x2
YMH0021: adding io range 0x100-0xfff, size=0x2, align=0x2
YMH0021: adding irq mask 0xea0
YMH0021: adding dma mask 0xb
YMH0021: adding dma mask 0xb
YMH0021: start dependant
YMH0021: adding io range 0x220-0x28f, size=0x10, align=0x10
YMH0021: adding io range 0x530-0xf4f, size=0x8, align=0x8
YMH0021: adding io range 0x388-0x3fb, size=0x4, align=0x8
YMH0021: adding io range 0x300-0x335, size=0x2, align=0x2
YMH0021: adding io range 0x100-0xfff, size=0x2, align=0x2
YMH0021: adding irq mask 0xea8
YMH0021: adding dma mask 0xb
YMH0021: adding dma mask 0xb
YMH0021: end dependant
YMH0022: start dependant
YMH0022: adding io range 0x201-0x201, size=0x1, align=0x1
YMH0022: start dependant
YMH0022: adding io range 0x202-0x202, size=0x1, align=0x1
YMH0022: start dependant
YMH0022: adding io range 0x203-0x203, size=0x1, align=0x1
YMH0022: start dependant
YMH0022: adding io range 0x204-0x20f, size=0x1, align=0x1
YMH0022: end dependant
pnpbios: 15 devices, largest 109 bytes
PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00
PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x1fffffff,
size=0x1ff00000
PNP0c01: adding fixed memory32 range 0xfec00000-0xfec00fff, size=0x1000
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: end config
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0200: adding dma mask 0x10
PNP0200: adding fixed io range 0-0xf, size=0x10, align=0x1
PNP0200: adding fixed io range 0x80-0x90, size=0x11, align=0x1
PNP0200: adding fixed io range 0x94-0x9f, size=0xc, align=0x1
PNP0200: adding fixed io range 0xc0-0xde, size=0x1f, align=0x1
PNP0200: end config
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding fixed io range 0x40-0x43, size=0x4, align=0x1
PNP0100: end config
pnpbios: handle 3 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding fixed io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: end config
pnpbios: handle 4 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding fixed io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding fixed io range 0x64-0x64, size=0x1, align=0x1
PNP0303: end config
pnpbios: handle 5 device ID PNP0303 (0303d041)
PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 6 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding fixed io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: end config
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0c02: adding io range 0xfc00-0xfc3f, size=0x40, align=0
PNP0c02: adding io range 0xfcb0-0xfcbf, size=0x10, align=0
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0c02: end config
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x2e-0x2e, size=0x1, align=0x1
PNP0c02: adding io range 0x2f-0x2f, size=0x1, align=0x1
PNP0c02: adding io range 0x20b-0x20b, size=0x1, align=0x1
PNP0c02: adding io range 0x290-0x297, size=0x8, align=0
PNP0c02: end config
pnpbios: handle 9 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x8
PNP0501: end config
pnpbios: handle 10 device ID PNP0501 (0105d041)
PNP0401: adding io range 0x378-0x37b, size=0x4, align=0x8
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x8
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
PNP0401: end config
pnpbios: handle 11 device ID PNP0401 (0104d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 12 device ID PNP0700 (0007d041)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 13 device ID PNP0f13 (130fd041)
PNP0a03: end config
pnpbios: handle 14 device ID PNP0a03 (030ad041)
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcc7ff on isa0
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 flags 0x28 on isa0
ppc0: Generic chipset (ECP-only) in ECP mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/ECP/NIBBLE_ID/ECP_ID/Extensibility
Link
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 810C> MLC,PCL,PML
lpt0: <Printer> on ppbus0
lpt0: Polled port
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
adv0 failed to probe on isa0
bt0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vt0 failed to probe on isa0
pmtimer0 failed to probe on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: irq maps: 0x4e1 0x4e1 0x4e1 0x4e1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: irq maps: 0x4e1 0x4e9 0x4e1 0x4e1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc1: cannot reserve I/O port range
ppc1: <Parallel port> failed to probe at port 0x378 irq 7 flags 0x28 on
isa0
ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
cs0 failed to probe at port 0x300 on isa0
sn0 failed to probe at port 0x300 irq 10 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
fe0 failed to probe at port 0x300 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
sc1: <System console> on isa0
sc1: MDA <16 virtual consoles, flags=0x0>
sc1: fb1, terminal emulator: sc (syscons terminal)
WARNING: Driver mistake: repeat make_dev("consolectl")
vga1: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on
isa0
fb1: vga1, mda, type:MDA (1), flags:0x70000
fb1: port:0x3b0-0x3bb, crtc:0x3b4, mem:0xb0000 0x8000
fb1: init mode:7, bios mode:7, current mode:7
fb1: window:0xc00b0000 size:32k gran:32k, buf:0 size:32k
isa_probe_children: probing PnP devices
pcm1: <Yamaha OPL-SAx> at port
0x220-0x22f,0x530-0x537,0x388-0x38b,0x330-0x331,0x370-0x371 irq 5 drq
0,1 on isa0
Yamaha: ver 0x21 DMA config 0x84
pcm: setmap 512000, 1000; 0xcf1e4000 -> 512000
pcm: setmap 513000, 1000; 0xcf1e5000 -> 513000
unknown: <YAMAHA OPL3-SAx Audio System> failed to probe at port 0x201 on
isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
pca0: <AT-style speaker sound> at port 0x61 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37b on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
SMP: enabled INTs: 1, 3, 4, 5, 6, 9, 11, 12, 14, 15, apic_imen:
0xffff2585
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
1:0209fe3f 0..521=522 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0
intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to accept, unlimited logging
bpf: lo0 attached
DUMMYNET initialized (010124)
bpf: ppp0 attached
Linux ELF exec handler installed
BRIDGE 010131, have 3 interfaces
-- index 1 type 6 phy 0 addrl 6 addr 00.04.5a.42.cd.67
IP Filter: v3.4.16 initialized. Default = pass all, Logging = enabled
ad0: success setting UDMA2 on Intel chip
Creating DISK ad0
ad0: <Maxtor 92041U4/FA520S60> ATA-5 disk at ata0-master
ad0: 19541MB (40020624 sectors), 39703 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
Waiting 30 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(probe0:ahc0:0:0:0): SCB 0x9 - timed out
ahc0: Dumping Card State in Data-in phase, at SEQADDR 0x56
SCSISEQ = 0x12, SBLKCTL = 0x2
DFCNTRL = 0x78, DFSTATUS = 0x0
LASTPHASE = 0x40, SCSISIGI = 0x44, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x3
STACK == 0x16d, 0x0, 0x0, 0x8c
SCB count = 20
Kernel NEXTQSCB = 14
Card NEXTQSCB = 8
QINFIFO entries: 8 7 6 5 4 3 2 1 0 19 18 17 16 15
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9
Pending list: 15 16 17 18 19 0 1 2 3 4 5 6 7 8 9
Kernel Free SCB list: 13 12 11 10
sg[0] - Addr 0x94ec84 : Length 36
(probe0:ahc0:0:0:0): BDR message in message buffer
(probe0:ahc0:0:0:0): SCB 0x9 - timed out
ahc0: Dumping Card State in Data-in phase, at SEQADDR 0x18b
SCSISEQ = 0x12, SBLKCTL = 0x2
DFCNTRL = 0x78, DFSTATUS = 0x0
LASTPHASE = 0x40, SCSISIGI = 0x54, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x3
STACK == 0x100, 0x8c, 0x100, 0x8c
SCB count = 20
Kernel NEXTQSCB = 14
Card NEXTQSCB = 8
QINFIFO entries: 8 7 6 5 4 3 2 1 0 19 18 17 16 15
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9
Pending list: 15 16 17 18 19 0 1 2 3 4 5 6 7 8 9
Kernel Free SCB list: 13 12 11 10
sg[0] - Addr 0x94ec84 : Length 36
(probe0:ahc0:0:0:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 15 SCBs aborted
(probe6:ahc0:0:6:0): Retrying Command
(probe12:ahc0:0:13:0): Retrying Command
(probe13:ahc0:0:14:0): Retrying Command
(probe1:ahc0:0:1:0): Retrying Command
(probe2:ahc0:0:2:0): Retrying Command
(probe3:ahc0:0:3:0): Retrying Command
(probe4:ahc0:0:4:0): Retrying Command
(probe5:ahc0:0:5:0): Retrying Command
(probe7:ahc0:0:8:0): Retrying Command
(probe8:ahc0:0:9:0): Retrying Command
(probe9:ahc0:0:10:0): Retrying Command
(probe10:ahc0:0:11:0): Retrying Command
(probe11:ahc0:0:12:0): Retrying Command
(probe14:ahc0:0:15:0): Retrying Command
(probe0:ahc0:0:0:0): Retrying Command
(ahc0:A:0:0): Received WDTR 0 filtered to 0
(ahc0:A:0:0): Target Initiated WDTR
(ahc0:A:0:0): Sending WDTR 0
(ahc0:A:0:0): Received SDTR period 19, offset f
Filtered to period 0, offset 0
(ahc0:A:0:0): Target Initiated SDTR
(ahc0:A:0:0): Sending SDTR period 0, offset 0
(probe0:ahc0:0:0:0): Retrying Command
(probe0:ahc0:0:0:0): Retrying Command
(probe0:ahc0:0:0:0): SCB 0x8 - timed out
ahc0: Dumping Card State in Command phase, at SEQADDR 0x15f
SCSISEQ = 0x12, SBLKCTL = 0x2
DFCNTRL = 0x4, DFSTATUS = 0x65
LASTPHASE = 0x80, SCSISIGI = 0x84, SXFRCTL0 = 0x88
SSTAT0 = 0x6, SSTAT1 = 0x2
STACK == 0x16d, 0x157, 0x8c, 0x37
SCB count = 20
Kernel NEXTQSCB = 7
Card NEXTQSCB = 7
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0
Pending list: 8
Kernel Free SCB list: 6 5 4 3 2 1 0 19 18 17 16 15 9 14 13 12 11 10
(probe0:ahc0:0:0:0): BDR message in message buffer
(ahc0:A:0:0): Received SDTR period 19, offset f
Filtered to period 0, offset 0
(ahc0:A:0:0): Target Initiated SDTR
(ahc0:A:0:0): Sending SDTR period 0, offset 0
(probe0:ahc0:0:0:0): no longer in timeout, status = 300
(ahc0:A:0:0): Sending WDTR 1
(ahc0:A:0:0): Received WDTR 1 filtered to 1
ahc0: target 0 using 16bit transfers
(ahc0:A:0:0): Sending SDTR period 19, offset 8
(ahc0:A:0:0): Received SDTR period 19, offset 8
Filtered to period 19, offset 8
ahc0: target 0 synchronous at 10.0MHz, offset = 0x8
Creating DISK da0
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <COMPAQ ST15150W 6213> Fixed Direct Access SCSI-2 device
pass0: Serial Number 00318200
pass0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged
Queueing Enabled
da0 at ahc0 bus 0 target 0 lun 0
da0: <COMPAQ ST15150W 6213> Fixed Direct Access SCSI-2 device
da0: Serial Number 00318200
da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da0: 4094MB (8386000 512 byte sectors: 64H 32S/T 4094C)
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 40017914, size 40017852 : OK
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
start_init: trying /sbin/init
dc0: failed to force tx and rx to idle state
interface ibcs2.1 already present in the KLD 'kernel'!
dc0: promiscuous mode enabled
dc0: promiscuous mode disabled
jim
--
ET has one helluva sense of humor!
He's always anal-probing right-wing schizos!
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message
More information about the aic7xxx
mailing list